From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: Re: [PATCH] clk: tegra: initialise parent of uart clocks Date: Wed, 06 Feb 2013 10:43:41 -0700 Message-ID: <5112964D.50707@wwwdotorg.org> References: <1360147661-5435-1-git-send-email-ldewangan@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1360147661-5435-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Laxman Dewangan Cc: swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-tegra@vger.kernel.org On 02/06/2013 03:47 AM, Laxman Dewangan wrote: > Initialise the parent of UARTs to PLLP OK > and disabling clock by default. Hmm. Only the clocks initialized by the new entries you added are marked disabled (or rather, not actively enabled; if they're enabled already, they won't be disabled). We should treat all UARTs equally. Historically we've needed to enable the serial clocks forcibly since the regular serial driver didn't call clk_get() or clk_prepare_enable() on any clocks, but I notice that it does now, since sometime in kernel 3.8. As such, I think you can modify all the UART entries in these tables to have the enable/state field set to false (0). Can you try that and check that it works for the serial console ports? Thanks.