Re: [PATCH V2 0/5] ARM: DT: tegra114: Add DT entry for different controller

[Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>]

On 03/12/2013 04:11 AM, Laxman Dewangan wrote:
> On Tuesday 12 March 2013 03:45 AM, Stephen Warren wrote:
>> On 03/09/2013 11:11 AM, Laxman Dewangan wrote:
>>> This patch series add DT entry for APB DMA, I2C, UART, KBC and SPI.
>>>
>>> This patch series is generated on top of CCF work for T114 done by Peter
>>> and hence it should be applied on top of T114 CCF patches.
>>>
>>> Changes from V1:
>>> - Add reeason why APBDMA is not compatible with older driver
>>>    in description.
>>> - Remove UARTB car id correction. Make the compatible with tegra114 and
>>>    older chip.
>>> - Add compatible for kbc as nvidia,tegra114-kbc and nvidia,tegra20-kbc.
>>>
>>> Laxman Dewangan (5):
>>>    ARM: DT: tegra114: add APB DMA controller DT entry
>>>    ARM: DT: tegra114: Add i2c controller DT entry
>>>    ARM: DT: tegra114:add aliases and DMA requestor for serial controller
>>>    ARM: DT: tegra114: add KBC controller DT entry
>>>    ARM: DT: tegra114: Add spi controller DT entry
>> What branch is this series based on? I tried to apply these for testing,
>> but git am failed to apply it to Tegra's for-3.10/dt, and Tegra's
>> for-next, and my local work branch, and next-20130307.
>>
>> Can you please rebase onto Tegra's for-3.10/dt. Thanks.
> 
> I created the patch as:
> - linux next 20130307
> - Then add all clock changes from Peter's
> git://nv-tegra.nvidia.com/user/pdeschrijver/linux.git
> 
> - Then I generated the DT entry on top of this which has clock reference.
> 
> In your 3.10/DT, there is no change for Peter's clock change and
> possibly this is the reason.

Yes, that's probably the problem. Please base on the current for-3.10/dt
branch directly.

> If I base my change on your 3.10/DT then:
> - Do I need to add the clock entry for all modules also?

Yes, please add complete nodes.