From: Prashant Gaikwad <pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
"mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org"
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: Re: [PATCH resend 1/2] clk: tegra: remove USB from clk init table
Date: Wed, 17 Apr 2013 17:39:37 +0530 [thread overview]
Message-ID: <516E9101.5050703@nvidia.com> (raw)
In-Reply-To: <1366011105-2351-1-git-send-email-dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>
On Monday 15 April 2013 01:01 PM, Lucas Stach wrote:
> The USB clocks are just clock gates, so no need to set a specific clock.
> In fact trying to set a specific clock is just a NOP if the requested
> clockrate is the same as those of the parent (clk_m) or will trigger a
> WARN_ON() if rates don't match up.
>
> As we are not setting a specific rate, nor activating the clocks at
> init, there is no point in keeping the the usb entries in the clock init
> table.
>
> Signed-off-by: Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>
> ---
> Trace produced by system with 13MHz clk_m:
Reviewed-by: Prashant Gaikwad <pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> tegra_init_from_table: Failed to set rate 12000000 of usbd
> ------------[ cut here ]------------
> WARNING: at drivers/clk/tegra/clk.c:64
> tegra_init_from_table+0xc0/0x158()
> Modules linked in:
> [<c0013a84>] (unwind_backtrace+0x0/0xf8) from
> [<c0021a24>](warn_slowpath_common+0x4c/0x64)
> [<c0021a24>] (warn_slowpath_common+0x4c/0x64) from [<c0021a58>]
> (warn_slowpath_null+0x1c/0x24)
> [<c0021a58>] (warn_slowpath_null+0x1c/0x24) from [<c069343c>]
> (tegra_init_from_table+0xc0/0x158)
> [<c069343c>] (tegra_init_from_table+0xc0/0x158) from [<c0694878>]
> (tegra20_clock_init+0x1398/0x13d4)
> [<c0694878>] (tegra20_clock_init+0x1398/0x13d4) from [<c0693298>]
> (of_clk_init+0x30/0x58)
> [<c0693298>] (of_clk_init+0x30/0x58) from [<c0681e5c>]
> (tegra_dt_init_irq+0x8/0x1c)
> [<c0681e5c>] (tegra_dt_init_irq+0x8/0x1c) from [<c067d334>]
> (init_IRQ+0x14/0x1c)
> [<c067d334>] (init_IRQ+0x14/0x1c) from [<c067b6b4>]
> (start_kernel+0x1a0/0x2f8)
> [<c067b6b4>] (start_kernel+0x1a0/0x2f8) from [<0000807c>] (0x807c)
> ---[ end trace 1b75b31a2719ed1c ]---
> ---
> drivers/clk/tegra/clk-tegra20.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
> index f873dce..a73278f 100644
> --- a/drivers/clk/tegra/clk-tegra20.c
> +++ b/drivers/clk/tegra/clk-tegra20.c
> @@ -1259,9 +1259,6 @@ static __initdata struct tegra_clk_init_table init_table[] = {
> {uartc, pll_p, 0, 0},
> {uartd, pll_p, 0, 0},
> {uarte, pll_p, 0, 0},
> - {usbd, clk_max, 12000000, 0},
> - {usb2, clk_max, 12000000, 0},
> - {usb3, clk_max, 12000000, 0},
> {pll_a, clk_max, 56448000, 1},
> {pll_a_out0, clk_max, 11289600, 1},
> {cdev1, clk_max, 0, 1},
next prev parent reply other threads:[~2013-04-17 12:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-15 7:31 [PATCH resend 1/2] clk: tegra: remove USB from clk init table Lucas Stach
[not found] ` <1366011105-2351-1-git-send-email-dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>
2013-04-15 7:31 ` [PATCH resend 2/2] clk: tegra: add ac97 controller clock Lucas Stach
[not found] ` <1366011105-2351-2-git-send-email-dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>
2013-04-15 11:03 ` Peter De Schrijver
2013-04-17 12:17 ` Prashant Gaikwad
[not found] ` <516E92C7.6070700-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-04-17 15:11 ` Stephen Warren
2013-04-15 10:59 ` [PATCH resend 1/2] clk: tegra: remove USB from clk init table Peter De Schrijver
2013-04-15 17:47 ` Stephen Warren
[not found] ` <516C3D3A.7000508-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-04-17 12:14 ` Prashant Gaikwad
[not found] ` <516E9222.4080506-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-04-17 15:10 ` Stephen Warren
2013-04-17 12:09 ` Prashant Gaikwad [this message]
2013-04-17 17:29 ` Stephen Warren
[not found] ` <516EDC0B.1060105-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-04-17 19:48 ` Mike Turquette
2013-04-18 6:46 ` Olof Johansson
2013-05-06 21:05 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=516E9101.5050703@nvidia.com \
--to=pgaikwad-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).