Re: [PATCHv5 6/9] iommu/tegra: smmu: get swgroups from DT "iommus="

[Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>]

On 11/19/2013 02:33 AM, Hiroshi Doyu wrote:
> This provides the info about which swgroups a device belongs to. This
> info is passed from DT. This is necessary for the unified SMMU driver
> among Tegra SoCs since each has different H/W accelerators.

> diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt

>  - nvidia,#asids : # of ASIDs
>  - dma-window : IOVA start address and length.
>  - nvidia,ahb : phandle to the ahb bus connected to SMMU.
> +- iommus: phandle to an iommu device which a device is
> +  attached to and indicates which swgroups a device belongs to(SWGROUP ID).
> +  SWGROUP ID is from 0 to 63, and a device can belong to multiple SWGROUPS.

I'm sure I've said this before:

#iommu-cells isn't documented.

The list of properties you added to is a list of properties that the
IOMMU node should contain. However, the iommus property is something
that *client* nodes should contain, not the IOMMU node itself.

Instead, I think you want something like:

-Required properties:
+Required properties in the IOMMU node:
 ... the current list of properties
+#iommu-cells. Should be 2. In client IOMMU specifiers, the two cells
+  represent a 64-bit bitmask of SWGROUP IDs under which the device
+  initiates transactions. The least significant word is first. See
+  <dt-bindings/memory/tegra-swgroup.h> for a list of valid values.
+
+Required properties in device nodes affected by the IOMMU:
+- iommus: A list of phandle plus specifier pairs for each IOMMU that
+    affects master transactions initiated by the device. The number of
+    cells in each specifier is defined by the #iommu-cells property in
+    the IOMMU node referred to by the phandle. The meaning of the
+    specifier cells is defined by the referenced IOMMU's binding.

Aside from those layout/wording issues, this is certainly the binding
that I think makes sense.

> +	host1x {
> +		compatible = "nvidia,tegra30-host1x", "simple-bus";
> +		iommus = <&smmu TEGRA_SWGROUP_CELLS(HC)>;
> +		....
> +		gr3d {
> +			compatible = "nvidia,tegra30-gr3d";
> +			nvidia,memory-clients = <&smmu TEGRA_SWGROUP_CELLS(NV)
> +						       TEGRA_SWGROUP_CELLS(NV2)>;

I think you forgot to update "nvidia,memory-clients" to "iommus" there.

> diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c

> +static int smmu_of_get_swgroups(struct device *dev, unsigned long *swgroups)

This doesn't seem to be used by anything in this patch.