From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: Re: [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings Date: Thu, 05 Dec 2013 10:12:43 -0700 Message-ID: <52A0B40B.7040903@wwwdotorg.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Stefan Agner , thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org, lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: kai.poggensee-RM9K5IK7kjKj5M59NBduVrNAH6kLmebB@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-tegra@vger.kernel.org On 12/03/2013 03:18 PM, Stefan Agner wrote: > Set the parent of the regulators LDO2 to LDO9 according to the > schematic. Set the base voltage to 3.3V, there is only 3.3V on the > module itself. > > Set the Core and CPU voltage to the specified voltages of 1.2V and > 1.0V respectivly. > > LDO6 should deliver 2.85V. The attached peripherals were not in > use so far. Does this depend on patch 1/3 or 2/3, or can I apply it to the Tegra tree which doesn't include those patches? If this does depend on patch 1/3 or 2/3... this patch feels a bit big to apply to the MFD tree. Perhaps patch 1/3 and 2/3 could be applied alone to a topic branch in the MFD tree so I can merge that into the Tegra tree in order to apply this?