Re: [PATCH 2/5] ARM: tegra: of: add GK20A device tree binding

[Stephen Warren <swarren@wwwdotorg.org>]

On 05/19/2014 03:24 AM, Alexandre Courbot wrote:
> Add the device tree binding documentation for the GK20A GPU used in
> Tegra K1 SoCs.

A few minor nits, but otherwise,
Acked-by: Stephen Warren <swarren@nvidia.com>

> diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt

> +Required properties:
> +- compatible: "nvidia,<chip>-<gpu>"
> +  Currently recognized values:
> +  - nvidia,tegra124-gk20a
> +- reg: Physical base address and length of the controller's registers.
> +  Must contain two entries:
> +  - first entry for bar0
> +  - second entry for bar1
> +- interrupts: The interrupt outputs from the controller.

To be consistent with the clocks and resets properties, it'd be nice to
reword that as:

interrupts: Must contain an entry for each entry in interrupt-names.

> +- interrupt-names: Must include the following entries:

... and add the following here:

See ../interrupt-controller/interrupts.txt

> +/ {

No need to wrap a root node around this in the example.

> +	gpu@0,57000000 {
...
> +	};
> +

Extra blank line here.

> +};