From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [PATCH v4 1/8] of: Add NVIDIA Tegra SATA controller binding Date: Wed, 16 Jul 2014 13:49:57 +0200 Message-ID: <53C666E5.6030009@redhat.com> References: <1405500863-19696-2-git-send-email-mperttunen@nvidia.com> <1405510814-31928-1-git-send-email-mperttunen@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1405510814-31928-1-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Mikko Perttunen , swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-ide-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-tegra@vger.kernel.org Hi, On 07/16/2014 01:40 PM, Mikko Perttunen wrote: > This patch adds device tree binding documentation for the SATA > controller found on NVIDIA Tegra SoCs. > > Signed-off-by: Mikko Perttunen > --- > v4: clarify mandatory clock order Thanks this and the new v4 of "ata: Add support for the Tegra124 SATA controller" both look good to me. So these 2 + v3 for the rest of the series are: Acked-by: Hans de Goede Regards, Hans > > .../devicetree/bindings/ata/tegra-sata.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt > > diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt > new file mode 100644 > index 0000000..de2f775 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt > @@ -0,0 +1,31 @@ > +Tegra124 SoC SATA AHCI controller > + > +Required properties : > +- compatible : "nvidia,tegra124-ahci". > +- reg : Should contain 2 entries: > + - AHCI register set (SATA BAR5) > + - SATA register set > +- interrupts : Defines the interrupt used by SATA > +- clocks : Must contain an entry for each entry in clock-names. > + See ../clocks/clock-bindings.txt for details. > +- clock-names : Must include the following entries in the same > + order as listed here: > + - sata > + - sata-oob > + - cml1 > + - pll_e > +- resets : Must contain an entry for each entry in reset-names. > + See ../reset/reset.txt for details. > +- reset-names : Must include the following entries: > + - sata > + - sata-oob > + - sata-cold > +- phys : Must contain an entry for each entry in phy-names. > + See ../phy/phy-bindings.txt for details. > +- phy-names : Must include the following entries: > + - sata-phy : XUSB PADCTL SATA PHY > +- hvdd-supply : Defines the SATA HVDD regulator > +- vddio-supply : Defines the SATA VDDIO regulator > +- avdd-supply : Defines the SATA AVDD regulator > +- target-5v-supply : Defines the SATA 5V power regulator > +- target-12v-supply : Defines the SATA 12V power regulator >