From: Jim Lin <jilin@nvidia.com>
To: Rhyland Klein <rklein@nvidia.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>,
Mike Turquette <mturquette@linaro.org>,
Stephen Warren <swarren@wwwdotorg.org>,
Stephen Boyd <sboyd@codeaurora.org>,
Thierry Reding <thierry.reding@gmail.com>,
Alexandre Courbot <gnurou@gmail.com>,
linux-clk@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 02/20] clk: tegra: periph: add new periph clks and muxes for Tegra210
Date: Wed, 6 May 2015 19:20:32 +0800 [thread overview]
Message-ID: <5549F900.2050600@nvidia.com> (raw)
In-Reply-To: <1430757460-9478-3-git-send-email-rklein@nvidia.com>
On 05/05/2015 12:37 AM, Rhyland Klein wrote:
> Tegra210 has significant differences in muxes for peripheral clocks.
> One of the most important changes is that pll_m isn't to be used
> as a source for peripherals. Therefore, we need to define the new
> muxes and new clocks to use those muxes for Tegra210 support.
>
> Signed-off-by: Rhyland Klein <rklein@nvidia.com>
> ---
> drivers/clk/tegra/clk-id.h | 57 +++++++-
> drivers/clk/tegra/clk-tegra-periph.c | 257 +++++++++++++++++++++++++++++++++-
> 2 files changed, 312 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
> index 60738cc954cb..ac6eaba5cc6e 100644
>
>
> diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
> index 46af9244ba74..bde7286bb16b 100644
> --- a/drivers/clk/tegra/clk-tegra-periph.c
> +++ b/drivers/clk/tegra/clk-tegra-periph.c
>
> @@ -303,12 +386,93 @@ static const char *mux_pllm_pllc_pllp_plla[] = {
> #define mux_pllm_pllc_pllp_plla_idx mux_pllp_pllc_pllm_clkm_idx
>
> static const char *mux_pllp_pllc_clkm[] = {
> - "pll_p", "pll_c", "pll_m"
> + "pll_p", "pll_c", "clk_m"
> };
> static u32 mux_pllp_pllc_clkm_idx[] = {
> [0] = 0, [1] = 1, [2] = 3,
> };
>
> +static const char *mux_pllp_pllc_clkm_1[] = {
> + "pll_p", "pll_c", "clk_m"
> +};
> +static u32 mux_pllp_pllc_clkm_1_idx[] = {
> + [0] = 0, [1] = 2, [2] = 5,
> +};
> +
> +static const char *mux_pllp_pllc_plla_clkm[] = {
> + "pll_p", "pll_c", "pll_a_out0", "clk_m"
> +};
> +static u32 mux_pllp_pllc_plla_clkm_idx[] = {
> + [0] = 0, [1] = 2, [2] = 4, [3] = 6,
> +};
> +
> +static const char *mux_pllp_pllc_pllc4_out0_pllc4_out1_clkm_pllc4_out2[] = {
> + "pll_p", "pll_c", "pll_c4_out0", "pll_c4_out1", "clk_m", "pll_c4_out2"
> +};
> +static u32 mux_pllp_pllc_pllc4_out0_pllc4_out1_clkm_pllc4_out2_idx[] = {
> + [0] = 0, [1] = 2, [2] = 3, [3] = 5, [4] = 6, [5] = 7,
> +};
> +
> +static const char *
> +mux_pllp_pllc_pllc_out1_pllc4_out2_pllc4_out1_clkm_pllc4_out0[] = {
> + "pll_p", "pll_c_out1", "pll_c", "pll_c4_out2", "pll_c4_out1",
> + "clk_m", "pll_c4_out0"
> +};
> +static u32
> +mux_pllp_pllc_pllc_out1_pllc4_out2_pllc4_out1_clkm_pllc4_out0_idx[] = {
> + [0] = 0, [1] = 1, [2] = 2, [3] = 4, [4] = 5, [5] = 6, [6] = 7,
> +};
> +
> +static const char *mux_pllp_pllc4_out2_pllc4_out1_clkm_pllc4_out0[] = {
> + "pll_p", "pll_c4_out2", "pll_c4_out1", "clk_m", "pll_c4_out0"
> +};
> +static u32 mux_pllp_pllc4_out2_pllc4_out1_clkm_pllc4_out0_idx[] = {
> + [0] = 0, [1] = 3, [2] = 4, [3] = 6, [4] = 7,
> +};
> +
> +static const char *mux_pllp_clkm_pllc4_out2_out1_out0_lj[] = {
> + "pll_p",
> + "pll_c4_out2", "pll_c4_out0", /* LJ input */
> + "pll_c4_out2", "pll_c4_out1",
> + "pll_c4_out1", /* LJ input */
> + "clk_m", "pll_c4_out0"
> +};
> +#define mux_pllp_clkm_pllc4_out2_out1_out0_lj_idx NULL
> +
> +static const char *mux_pllp_pllc2_c_c3_clkm[] = {
> + "pll_p", "pll_c2", "pll_c", "pll_c3", "clk_m"
> +};
> +static u32 mux_pllp_pllc2_c_c3_clkm_idx[] = {
> + [0] = 0, [1] = 1, [2] = 2, [3] = 3, [4] = 6,
> +};
> +
> +static const char *mux_pllp_clkm_clk32_plle[] = {
> + "pll_p", "clk_m", "clk_32k", "pll_e"
> +};
> +static u32 mux_pllp_clkm_clk32_plle_idx[] = {
> + [0] = 0, [1] = 2, [2] = 4, [3] = 6,
> +};
> +
> +static const char *mux_pllp_pllp_out3_clkm_clk32k_plla[] = {
> + "pll_p", "pll_p_out3", "clk_m", "clk_32k", "pll_a_out0"
> +};
> +#define mux_pllp_pllp_out3_clkm_clk32k_plla_idx NULL
> +
> +static const char *mux_pllp_out3_clkm_pllp_pllc4[] = {
> + "pll_p_out3", "clk_m", "pll_p", "pll_c4_out0", "pll_c4_out1",
> + "pll_c4_out2"
> +};
> +static u32 mux_pllp_out3_clkm_pllp_pllc4_idx[] = {
> + [0] = 0, [1] = 3, [2] = 4, [3] = 5, [4] = 6, [5] = 7,
> +};
> +
> +static const char *mux_clkm_pllp_pllre[] = {
> + "clk_m", "pll_p_out_xusb", "pll_re_out"
> +};
> +static u32 mux_clkm_pllp_pllre_idx[] = {
> + [0] = 0, [1] = 1, [2] = 5,
> +};
> +
> static const char *mux_pllp_pllc_clkm_clk32[] = {
> "pll_p", "pll_c", "clk_m", "clk_32k"
> };
> @@ -333,6 +497,11 @@ static u32 mux_clkm_48M_pllp_480M_idx[] = {
> [0] = 0, [1] = 2, [2] = 4, [3] = 6,
> };
>
> +static const char *mux_clkm_pllre_clk32_480M[] = {
> + "clk_m", "pll_re_out", "clk_32k", "pll_u_480M"
> +};
> +#define mux_clkm_pllre_clk32_480M_idx NULL
Please help to replace above
#define mux_clkm_pllre_clk32_480M_idx NULL
with
static u32 mux_clkm_pllre_clk32_480M_idx[] = {
[0] = 0, [1] = 1, [2] = 2, [3] = 3,
};
Thanks.
> +
> static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
> "clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
> };
>
--nvpublic
next prev parent reply other threads:[~2015-05-06 11:20 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-04 16:37 [PATCH v4 00/20] Tegra210 Clock Support Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 05/20] clk: tegra: pll: update warning msg Rhyland Klein
[not found] ` <1430757460-9478-6-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 20:20 ` Benson Leung
2015-05-04 16:37 ` [PATCH v4 07/20] clk: tegra: pll: Don't unconditionally set LOCK flags Rhyland Klein
[not found] ` <1430757460-9478-8-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 21:42 ` Benson Leung
[not found] ` <1430757460-9478-1-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 16:37 ` [PATCH v4 01/20] clk: tegra: Modify tegra_audio_clk_init to accept more plls Rhyland Klein
[not found] ` <1430757460-9478-2-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 18:05 ` Benson Leung
2015-05-07 15:15 ` Thierry Reding
[not found] ` <20150507151545.GB25866-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2015-05-07 15:49 ` Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 02/20] clk: tegra: periph: add new periph clks and muxes for Tegra210 Rhyland Klein
[not found] ` <1430757460-9478-3-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 19:45 ` Benson Leung
[not found] ` <CANLzEkuxPMX2+rq4EkCs6iV4=qRK69u=Ezgy4Zn_KsSh1+oEfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-05 20:14 ` Rhyland Klein
2015-05-06 13:59 ` Thierry Reding
2015-05-06 16:24 ` Rhyland Klein
2015-05-04 21:19 ` Andrew Bresticker
2015-05-06 11:20 ` Jim Lin [this message]
2015-05-06 14:15 ` Thierry Reding
2015-05-06 16:20 ` Rhyland Klein
2015-05-06 14:12 ` Thierry Reding
2015-05-04 16:37 ` [PATCH v4 03/20] clk: tegra: pll: add tegra_pll_wait_for_lock to clk header Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 04/20] clk: tegra: pll: simplify clk_enable_path Rhyland Klein
2015-05-04 20:11 ` Benson Leung
2015-05-04 16:37 ` [PATCH v4 06/20] clk: tegra: pll-params: change misc_reg count from 3 -> 6 Rhyland Klein
[not found] ` <1430757460-9478-7-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 20:35 ` Benson Leung
[not found] ` <CANLzEksajPjf1VH8Zn-1oXhgL8f-b7GuCBprExTP-w18WbCC4A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-06 14:18 ` Thierry Reding
2015-05-04 16:37 ` [PATCH v4 08/20] clk: tegra: pll: Add logic for handling SDM data Rhyland Klein
[not found] ` <1430757460-9478-9-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 23:01 ` Benson Leung
[not found] ` <CANLzEksFVpYOtcG5QHHfQa6bGXJ6nMYrsP4yG=5wszxCHrWqug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-05 19:16 ` Rhyland Klein
2015-05-06 13:57 ` Thierry Reding
2015-05-06 16:16 ` Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 09/20] clk: tegra: pll: Add logic for SS Rhyland Klein
[not found] ` <1430757460-9478-10-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 23:11 ` Benson Leung
2015-05-05 20:15 ` Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 11/20] clk: tegra: pll: Add code to handle if resets are supported by PLL Rhyland Klein
2015-05-05 17:15 ` Benson Leung
2015-05-04 16:37 ` [PATCH v4 12/20] clk: tegra: pll: Add specialized logic for T210 Rhyland Klein
2015-05-07 15:11 ` Thierry Reding
2015-05-04 16:37 ` [PATCH v4 14/20] clk: tegra: pll: Adjust vco_min if SDM present Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 16/20] clk: tegra: pll: Add Set_default logic Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 17/20] clk: tegra: pll: Fix _pll_ramp_calc_pll logic and _calc_dynamic_ramp_rate Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 18/20] clk: tegra: Add Super Gen5 Logic Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 19/20] clk: tegra210: add support for Tegra210 clocks Rhyland Klein
2015-05-06 14:51 ` Thierry Reding
[not found] ` <20150506145113.GH22098-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2015-05-06 16:18 ` Rhyland Klein
2015-05-06 17:21 ` Rhyland Klein
[not found] ` <554A4D82.80307-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-07 15:16 ` Thierry Reding
2015-05-07 10:39 ` Jim Lin
[not found] ` <554B40D7.3040207-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-07 16:07 ` Rhyland Klein
2015-05-07 15:18 ` Thierry Reding
2015-05-05 13:14 ` [PATCH v4 00/20] Tegra210 Clock Support Thierry Reding
2015-05-05 15:55 ` Rhyland Klein
2015-05-06 13:37 ` Thierry Reding
2015-05-06 16:10 ` Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 10/20] clk: tegra: pll: Add logic for out-of-table rates for T210 Rhyland Klein
[not found] ` <1430757460-9478-11-git-send-email-rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2015-05-04 23:34 ` Benson Leung
[not found] ` <CANLzEktX3tiBXvxKgToUr5S7xZ+YibpeG6tDvW1R=qkW6_T5WQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-05-05 19:55 ` Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 13/20] clk: tegra: pll: Add support for PLLMB " Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 15/20] clk: tegra: pll: Add dyn_ramp callback Rhyland Klein
2015-05-04 16:37 ` [PATCH v4 20/20] clk: tegra: pll: Fix issues with rates for VCO PLLs Rhyland Klein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5549F900.2050600@nvidia.com \
--to=jilin@nvidia.com \
--cc=gnurou@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=pdeschrijver@nvidia.com \
--cc=rklein@nvidia.com \
--cc=sboyd@codeaurora.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).