Re: [PATCH V3 2/2] dmaengine: tegra-adma: Add support for Tegra210 ADMA

[Jon Hunter <jonathanh@nvidia.com>]

On 16/10/15 08:35, Jon Hunter wrote:
> Add support for the Tegra210 Audio DMA controller that is used for
> transferring data between system memory and the Audio sub-system.
> The driver only supports cyclic transfers because this is being solely
> used for audio.
> 
> This driver is based upon the work by Dara Ramesh <dramesh@nvidia.com>.
> 
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  drivers/dma/Kconfig         |  13 +
>  drivers/dma/Makefile        |   1 +
>  drivers/dma/tegra210-adma.c | 909 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 923 insertions(+)
>  create mode 100644 drivers/dma/tegra210-adma.c

[snip]

> +#ifdef CONFIG_PM_SLEEP
> +static int tegra_adma_pm_suspend(struct device *dev)
> +{
> +	return pm_runtime_suspended(dev);
> +}
> +#endif

The above is also wrong. I will fix this up as well.

Jon