Re: [PATCH] clk: tegra: Fix bypassing of PLLs

[Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

Hi Tyler,

On 23/11/15 23:18, Tyler Baker wrote:
> Hi Jon,
> 
> On 20 November 2015 at 07:11, Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
>> The _clk_disable_pll() function will attempt to place a PLL into bypass
>> if the TEGRA_PLL_BYPASS is specified for the PLL and then disable the PLL
>> by clearing the enable bit. To place the PLL into bypass, the bypass bit
>> needs to be set and not cleared. Fix this by setting the bypass bit and
>> not clearing it.
>>
>> Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> The kernelci.org bot recently detected a jetson-tk1 boot failure[1][2]
> in the tegra tree. This boot failure has only been observed when
> booting with a multi_v7_defconfig kernel variant. The bot bisected[3]
> this boot failure to this commit, and I confirmed reverting it on top
> of the tegra for-next branch resolves the issue. The ramdisk[4] used
> for booting is loaded with the modules from the build. It appears to
> me that as the modules are being loaded in userspace by eudev the
> jetson-tk1 locks up. I've sifted through the console logs a bit, and
> found this splat to be most interesting[5].  Can you confirm this
> issue on your end?

Thanks for the report. I have booted the latest next on the jetson-tk1
with the multi_v7_defconfig but I did not see this. However, the test
infrastructure is not loading those modules. I need to look at adding this.

I will see if I can reproduce this today and let you know what I find.

Cheers
Jon