[PATCH v6 00/12] Add T210 support in Tegra soctherm

[PATCH v6 00/12] Add T210 support in Tegra soctherm

[Wei Ni]

This patchset adds following functions for tegra_soctherm driver:
1. add T210 support.
2. export debugfs to show some registers.
3. add thermtrip funciton.
4. add suspend/resume function.

The v5 serial is in:
http://www.spinics.net/lists/linux-tegra/msg25079.html
The v4 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24972.html
The V3 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24911.html
The V2 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24901.html
The V1 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24808.html

Main changes from V5:
1. Change to use linux thermal framework to implement
thermtrip funciton, per Rob's comment.
2. Add .set_trip_temp() in of-thermal driver, so that
we can set trips on hardware.

Main changes from V4:
1. Change description of devicetree binding per Rob's comment.
2. Call of_node_put to decrement refcount of the node.

Main changes from V3:
1. Change structures to "const" in chip specific files.
2. Minor changes per Thieery's comments.

Main changes from V2:
1. Fix build error in patch [1/11].
2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].

Main changes from V1:
1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
2. Changes per Thieery's other comments.

Wei Ni (12):
  thermal: tegra: move tegra thermal files into tegra directory
  thermal: tegra: combine sensor group-related data
  thermal: tegra: get rid of PDIV/HOTSPOT hack
  thermal: tegra: split tegra_soctherm driver
  thermal: tegra: add Tegra210 specific SOC_THERM driver
  thermal: tegra: add a debugfs to show registers
  thermal: of-thermal: allow setting trip_temp on hardware
  of: add notes of critical trips for soctherm
  thermal: tegra: add thermtrip function
  thermal: tegra: add PM support
  arm64: tegra: add soctherm node for Tegra210
  arm: tegra: set critical trips for Tegra124

 .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
 arch/arm/boot/dts/tegra124.dtsi                    |  16 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
 drivers/thermal/Kconfig                            |  12 +-
 drivers/thermal/Makefile                           |   2 +-
 drivers/thermal/of-thermal.c                       |   8 +
 drivers/thermal/tegra/Kconfig                      |  13 +
 drivers/thermal/tegra/Makefile                     |   5 +
 drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
 drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
 drivers/thermal/tegra/soctherm.h                   | 123 ++++
 drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
 drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
 drivers/thermal/tegra_soctherm.c                   | 476 --------------
 include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
 include/linux/thermal.h                            |   1 +
 16 files changed, 1489 insertions(+), 487 deletions(-)
 create mode 100644 drivers/thermal/tegra/Kconfig
 create mode 100644 drivers/thermal/tegra/Makefile
 create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
 create mode 100644 drivers/thermal/tegra/soctherm.c
 create mode 100644 drivers/thermal/tegra/soctherm.h
 create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
 create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
 delete mode 100644 drivers/thermal/tegra_soctherm.c

-- 
1.9.1

Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm

[Wei Ni]

I sent this patch twice, please ignore this one.

On 2016年02月22日 16:06, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
> 
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
> 
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
> 
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
> 
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
> 
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
> 
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
> 
> Wei Ni (12):
>   thermal: tegra: move tegra thermal files into tegra directory
>   thermal: tegra: combine sensor group-related data
>   thermal: tegra: get rid of PDIV/HOTSPOT hack
>   thermal: tegra: split tegra_soctherm driver
>   thermal: tegra: add Tegra210 specific SOC_THERM driver
>   thermal: tegra: add a debugfs to show registers
>   thermal: of-thermal: allow setting trip_temp on hardware
>   of: add notes of critical trips for soctherm
>   thermal: tegra: add thermtrip function
>   thermal: tegra: add PM support
>   arm64: tegra: add soctherm node for Tegra210
>   arm: tegra: set critical trips for Tegra124
> 
>  .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
>  arch/arm/boot/dts/tegra124.dtsi                    |  16 +
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
>  drivers/thermal/Kconfig                            |  12 +-
>  drivers/thermal/Makefile                           |   2 +-
>  drivers/thermal/of-thermal.c                       |   8 +
>  drivers/thermal/tegra/Kconfig                      |  13 +
>  drivers/thermal/tegra/Makefile                     |   5 +
>  drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
>  drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
>  drivers/thermal/tegra/soctherm.h                   | 123 ++++
>  drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
>  drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
>  drivers/thermal/tegra_soctherm.c                   | 476 --------------
>  include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
>  include/linux/thermal.h                            |   1 +
>  16 files changed, 1489 insertions(+), 487 deletions(-)
>  create mode 100644 drivers/thermal/tegra/Kconfig
>  create mode 100644 drivers/thermal/tegra/Makefile
>  create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
>  create mode 100644 drivers/thermal/tegra/soctherm.c
>  create mode 100644 drivers/thermal/tegra/soctherm.h
>  create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
>  create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>  delete mode 100644 drivers/thermal/tegra_soctherm.c
> 

[PATCH v6 00/12] Add T210 support in Tegra soctherm

[Wei Ni]

This patchset adds following functions for tegra_soctherm driver:
1. add T210 support.
2. export debugfs to show some registers.
3. add thermtrip funciton.
4. add suspend/resume function.

The v5 serial is in:
http://www.spinics.net/lists/linux-tegra/msg25079.html
The v4 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24972.html
The V3 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24911.html
The V2 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24901.html
The V1 serial is in:
http://www.spinics.net/lists/linux-tegra/msg24808.html

Main changes from V5:
1. Change to use linux thermal framework to implement
thermtrip funciton, per Rob's comment.
2. Add .set_trip_temp() in of-thermal driver, so that
we can set trips on hardware.

Main changes from V4:
1. Change description of devicetree binding per Rob's comment.
2. Call of_node_put to decrement refcount of the node.

Main changes from V3:
1. Change structures to "const" in chip specific files.
2. Minor changes per Thieery's comments.

Main changes from V2:
1. Fix build error in patch [1/11].
2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].

Main changes from V1:
1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
2. Changes per Thieery's other comments.

Wei Ni (12):
  thermal: tegra: move tegra thermal files into tegra directory
  thermal: tegra: combine sensor group-related data
  thermal: tegra: get rid of PDIV/HOTSPOT hack
  thermal: tegra: split tegra_soctherm driver
  thermal: tegra: add Tegra210 specific SOC_THERM driver
  thermal: tegra: add a debugfs to show registers
  thermal: of-thermal: allow setting trip_temp on hardware
  of: add notes of critical trips for soctherm
  thermal: tegra: add thermtrip function
  thermal: tegra: add PM support
  arm64: tegra: add soctherm node for Tegra210
  arm: tegra: set critical trips for Tegra124

 .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
 arch/arm/boot/dts/tegra124.dtsi                    |  16 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
 drivers/thermal/Kconfig                            |  12 +-
 drivers/thermal/Makefile                           |   2 +-
 drivers/thermal/of-thermal.c                       |   8 +
 drivers/thermal/tegra/Kconfig                      |  13 +
 drivers/thermal/tegra/Makefile                     |   5 +
 drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
 drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
 drivers/thermal/tegra/soctherm.h                   | 123 ++++
 drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
 drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
 drivers/thermal/tegra_soctherm.c                   | 476 --------------
 include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
 include/linux/thermal.h                            |   1 +
 16 files changed, 1489 insertions(+), 487 deletions(-)
 create mode 100644 drivers/thermal/tegra/Kconfig
 create mode 100644 drivers/thermal/tegra/Makefile
 create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
 create mode 100644 drivers/thermal/tegra/soctherm.c
 create mode 100644 drivers/thermal/tegra/soctherm.h
 create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
 create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
 delete mode 100644 drivers/thermal/tegra_soctherm.c

-- 
1.9.1

Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm

[Wei Ni]

In the V5 series, there has discussion about how to implement thermtrip (shut
down) function, so I sent out this V6 series, which use Linux thermal framework
to implement it, for more discussion.

Thierry,
It looks there are no comments on patches 01~06 from V4, if no more comments,
will your take these patches first?

Thanks.
Wei.

On 2016年02月22日 16:05, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
> 
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
> 
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
> 
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
> 
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
> 
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
> 
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
> 
> Wei Ni (12):
>   thermal: tegra: move tegra thermal files into tegra directory
>   thermal: tegra: combine sensor group-related data
>   thermal: tegra: get rid of PDIV/HOTSPOT hack
>   thermal: tegra: split tegra_soctherm driver
>   thermal: tegra: add Tegra210 specific SOC_THERM driver
>   thermal: tegra: add a debugfs to show registers
>   thermal: of-thermal: allow setting trip_temp on hardware
>   of: add notes of critical trips for soctherm
>   thermal: tegra: add thermtrip function
>   thermal: tegra: add PM support
>   arm64: tegra: add soctherm node for Tegra210
>   arm: tegra: set critical trips for Tegra124
> 
>  .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
>  arch/arm/boot/dts/tegra124.dtsi                    |  16 +
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
>  drivers/thermal/Kconfig                            |  12 +-
>  drivers/thermal/Makefile                           |   2 +-
>  drivers/thermal/of-thermal.c                       |   8 +
>  drivers/thermal/tegra/Kconfig                      |  13 +
>  drivers/thermal/tegra/Makefile                     |   5 +
>  drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
>  drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
>  drivers/thermal/tegra/soctherm.h                   | 123 ++++
>  drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
>  drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
>  drivers/thermal/tegra_soctherm.c                   | 476 --------------
>  include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
>  include/linux/thermal.h                            |   1 +
>  16 files changed, 1489 insertions(+), 487 deletions(-)
>  create mode 100644 drivers/thermal/tegra/Kconfig
>  create mode 100644 drivers/thermal/tegra/Makefile
>  create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
>  create mode 100644 drivers/thermal/tegra/soctherm.c
>  create mode 100644 drivers/thermal/tegra/soctherm.h
>  create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
>  create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>  delete mode 100644 drivers/thermal/tegra_soctherm.c
> 

Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm

[Matt Longnecker]

Wei,

Should changes to of-thermal should be discussed on linux-pm as opposed 
to just linux-tegra and lkml?

Should you include Eduardo on the thread?

-Matt

On 02/22/2016 12:05 AM, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
>
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
>
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
>
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
>
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
>
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
>
> Wei Ni (12):
>    thermal: tegra: move tegra thermal files into tegra directory
>    thermal: tegra: combine sensor group-related data
>    thermal: tegra: get rid of PDIV/HOTSPOT hack
>    thermal: tegra: split tegra_soctherm driver
>    thermal: tegra: add Tegra210 specific SOC_THERM driver
>    thermal: tegra: add a debugfs to show registers
>    thermal: of-thermal: allow setting trip_temp on hardware
>    of: add notes of critical trips for soctherm
>    thermal: tegra: add thermtrip function
>    thermal: tegra: add PM support
>    arm64: tegra: add soctherm node for Tegra210
>    arm: tegra: set critical trips for Tegra124
>
>   .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
>   arch/arm/boot/dts/tegra124.dtsi                    |  16 +
>   arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
>   drivers/thermal/Kconfig                            |  12 +-
>   drivers/thermal/Makefile                           |   2 +-
>   drivers/thermal/of-thermal.c                       |   8 +
>   drivers/thermal/tegra/Kconfig                      |  13 +
>   drivers/thermal/tegra/Makefile                     |   5 +
>   drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
>   drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
>   drivers/thermal/tegra/soctherm.h                   | 123 ++++
>   drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
>   drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
>   drivers/thermal/tegra_soctherm.c                   | 476 --------------
>   include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
>   include/linux/thermal.h                            |   1 +
>   16 files changed, 1489 insertions(+), 487 deletions(-)
>   create mode 100644 drivers/thermal/tegra/Kconfig
>   create mode 100644 drivers/thermal/tegra/Makefile
>   create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
>   create mode 100644 drivers/thermal/tegra/soctherm.c
>   create mode 100644 drivers/thermal/tegra/soctherm.h
>   create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
>   create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>   delete mode 100644 drivers/thermal/tegra_soctherm.c
>

Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm

[Wei Ni]

On 2016年02月23日 02:31, Matt Longnecker wrote:
> Wei,
> 
> Should changes to of-thermal should be discussed on linux-pm as opposed to just
> linux-tegra and lkml?
> 
> Should you include Eduardo on the thread?

The [PATCH v6 07/12] has the changes to of-thermal, I added Eduardo in the "To:"
list in that patch, but didn't include linux-pm, I will add it.

> 
> -Matt
> 
> On 02/22/2016 12:05 AM, Wei Ni wrote:
>> This patchset adds following functions for tegra_soctherm driver:
>> 1. add T210 support.
>> 2. export debugfs to show some registers.
>> 3. add thermtrip funciton.
>> 4. add suspend/resume function.
>>
>> The v5 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg25079.html
>> The v4 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24972.html
>> The V3 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24911.html
>> The V2 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24901.html
>> The V1 serial is in:
>> http://www.spinics.net/lists/linux-tegra/msg24808.html
>>
>> Main changes from V5:
>> 1. Change to use linux thermal framework to implement
>> thermtrip funciton, per Rob's comment.
>> 2. Add .set_trip_temp() in of-thermal driver, so that
>> we can set trips on hardware.
>>
>> Main changes from V4:
>> 1. Change description of devicetree binding per Rob's comment.
>> 2. Call of_node_put to decrement refcount of the node.
>>
>> Main changes from V3:
>> 1. Change structures to "const" in chip specific files.
>> 2. Minor changes per Thieery's comments.
>>
>> Main changes from V2:
>> 1. Fix build error in patch [1/11].
>> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
>> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
>>
>> Main changes from V1:
>> 1. Use the new type to handl different Tegra chips in one driver, which
>> suggested by Thierry.
>> 2. Changes per Thieery's other comments.
>>
>> Wei Ni (12):
>>    thermal: tegra: move tegra thermal files into tegra directory
>>    thermal: tegra: combine sensor group-related data
>>    thermal: tegra: get rid of PDIV/HOTSPOT hack
>>    thermal: tegra: split tegra_soctherm driver
>>    thermal: tegra: add Tegra210 specific SOC_THERM driver
>>    thermal: tegra: add a debugfs to show registers
>>    thermal: of-thermal: allow setting trip_temp on hardware
>>    of: add notes of critical trips for soctherm
>>    thermal: tegra: add thermtrip function
>>    thermal: tegra: add PM support
>>    arm64: tegra: add soctherm node for Tegra210
>>    arm: tegra: set critical trips for Tegra124
>>
>>   .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
>>   arch/arm/boot/dts/tegra124.dtsi                    |  16 +
>>   arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
>>   drivers/thermal/Kconfig                            |  12 +-
>>   drivers/thermal/Makefile                           |   2 +-
>>   drivers/thermal/of-thermal.c                       |   8 +
>>   drivers/thermal/tegra/Kconfig                      |  13 +
>>   drivers/thermal/tegra/Makefile                     |   5 +
>>   drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
>>   drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
>>   drivers/thermal/tegra/soctherm.h                   | 123 ++++
>>   drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
>>   drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
>>   drivers/thermal/tegra_soctherm.c                   | 476 --------------
>>   include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
>>   include/linux/thermal.h                            |   1 +
>>   16 files changed, 1489 insertions(+), 487 deletions(-)
>>   create mode 100644 drivers/thermal/tegra/Kconfig
>>   create mode 100644 drivers/thermal/tegra/Makefile
>>   create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
>>   create mode 100644 drivers/thermal/tegra/soctherm.c
>>   create mode 100644 drivers/thermal/tegra/soctherm.h
>>   create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
>>   create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>>   delete mode 100644 drivers/thermal/tegra_soctherm.c
>>
> 

Re: [PATCH v6 00/12] Add T210 support in Tegra soctherm

[Wei Ni]

Hi,
Does anyone have comments on this series?

Thanks.
Wei.

On 2016年02月22日 16:05, Wei Ni wrote:
> This patchset adds following functions for tegra_soctherm driver:
> 1. add T210 support.
> 2. export debugfs to show some registers.
> 3. add thermtrip funciton.
> 4. add suspend/resume function.
> 
> The v5 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg25079.html
> The v4 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24972.html
> The V3 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24911.html
> The V2 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24901.html
> The V1 serial is in:
> http://www.spinics.net/lists/linux-tegra/msg24808.html
> 
> Main changes from V5:
> 1. Change to use linux thermal framework to implement
> thermtrip funciton, per Rob's comment.
> 2. Add .set_trip_temp() in of-thermal driver, so that
> we can set trips on hardware.
> 
> Main changes from V4:
> 1. Change description of devicetree binding per Rob's comment.
> 2. Call of_node_put to decrement refcount of the node.
> 
> Main changes from V3:
> 1. Change structures to "const" in chip specific files.
> 2. Minor changes per Thieery's comments.
> 
> Main changes from V2:
> 1. Fix build error in patch [1/11].
> 2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
> 3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
> 
> Main changes from V1:
> 1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
> 2. Changes per Thieery's other comments.
> 
> Wei Ni (12):
>   thermal: tegra: move tegra thermal files into tegra directory
>   thermal: tegra: combine sensor group-related data
>   thermal: tegra: get rid of PDIV/HOTSPOT hack
>   thermal: tegra: split tegra_soctherm driver
>   thermal: tegra: add Tegra210 specific SOC_THERM driver
>   thermal: tegra: add a debugfs to show registers
>   thermal: of-thermal: allow setting trip_temp on hardware
>   of: add notes of critical trips for soctherm
>   thermal: tegra: add thermtrip function
>   thermal: tegra: add PM support
>   arm64: tegra: add soctherm node for Tegra210
>   arm: tegra: set critical trips for Tegra124
> 
>  .../devicetree/bindings/thermal/tegra-soctherm.txt |  12 +
>  arch/arm/boot/dts/tegra124.dtsi                    |  16 +
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi           |  60 ++
>  drivers/thermal/Kconfig                            |  12 +-
>  drivers/thermal/Makefile                           |   2 +-
>  drivers/thermal/of-thermal.c                       |   8 +
>  drivers/thermal/tegra/Kconfig                      |  13 +
>  drivers/thermal/tegra/Makefile                     |   5 +
>  drivers/thermal/tegra/soctherm-fuse.c              | 169 +++++
>  drivers/thermal/tegra/soctherm.c                   | 685 +++++++++++++++++++++
>  drivers/thermal/tegra/soctherm.h                   | 123 ++++
>  drivers/thermal/tegra/tegra124-soctherm.c          | 196 ++++++
>  drivers/thermal/tegra/tegra210-soctherm.c          | 197 ++++++
>  drivers/thermal/tegra_soctherm.c                   | 476 --------------
>  include/dt-bindings/thermal/tegra124-soctherm.h    |   1 +
>  include/linux/thermal.h                            |   1 +
>  16 files changed, 1489 insertions(+), 487 deletions(-)
>  create mode 100644 drivers/thermal/tegra/Kconfig
>  create mode 100644 drivers/thermal/tegra/Makefile
>  create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
>  create mode 100644 drivers/thermal/tegra/soctherm.c
>  create mode 100644 drivers/thermal/tegra/soctherm.h
>  create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
>  create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
>  delete mode 100644 drivers/thermal/tegra_soctherm.c
>