From: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Lucas Stach <dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org>,
Adrian Hunter
<adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alexandre Courbot
<gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-mmc <linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] mmc: tegra: Disable UHS-I modes for tegra114
Date: Thu, 25 Feb 2016 09:42:54 +0000 [thread overview]
Message-ID: <56CECC9E.9010501@nvidia.com> (raw)
In-Reply-To: <CAPDyKFowEH=4PU1ErNxMA0=SiDT1Q86H0SfMuiH5jA+H7mvquA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Hi Adrian, Lucas,
On 18/02/16 16:07, Ulf Hansson wrote:
> +Adrian
>
> On 18 February 2016 at 15:48, Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> wrote:
>> SD card support for Tegra114 started failing after commit a8e326a911d3
>> ("mmc: tegra: implement module external clock change") was merged. This
>> commit was part of a series to enable UHS-I modes for Tegra. To
>> workaround this problem for now, only disable UHS-I modes for Tegra114
>> and in order to do this it is necessary to revert changes from commits
>> a8e326a911d3 ("mmc: tegra: implement module external clock change"),
>> c3c2384c3ac0 ("mmc: tegra: implement UHS tuning"), 7ad2ed1dfcbe
>> ("mmc: tegra: enable UHS-I modes") that impact Tegra114. To do this so
>> that UHS-I mode can be disabled for Tegra114 but not for Tegra124
>> separate the platform data, soc data and sdhci-ops so they are no longer
>> common to both Tegra114 and Tegra124.
>>
>> Fixes: a8e326a911d3 ("mmc: tegra: implement module external clock change")
>>
>> Signed-off-by: Jon Hunter <jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> This looks okay to me, although I need and ack from Adrian to pick up
> this for fixes. Adrian did recently step in as the maintainer for
> sdhci.
Are you guys ok with this? It would be good to get your ACK's so that
Ulf can pick it up.
Jon
>> ---
>> drivers/mmc/host/sdhci-tegra.c | 42 +++++++++++++++++++++++++++++++++++++-----
>> 1 file changed, 37 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
>> index 83c4bf7bc16c..bc7a0847e316 100644
>> --- a/drivers/mmc/host/sdhci-tegra.c
>> +++ b/drivers/mmc/host/sdhci-tegra.c
>> @@ -147,10 +147,16 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
>> /* Advertise UHS modes as supported by host */
>> if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
>> misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50;
>> + else
>> + misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR50;
>> if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
>> misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
>> + else
>> + misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_DDR50;
>> if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
>> misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
>> + else
>> + misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104;
>> sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
>>
>> clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
>> @@ -315,6 +321,32 @@ static const struct sdhci_ops tegra114_sdhci_ops = {
>> .write_w = tegra_sdhci_writew,
>> .write_l = tegra_sdhci_writel,
>> .set_clock = tegra_sdhci_set_clock,
>> + .set_bus_width = sdhci_set_bus_width,
>> + .reset = tegra_sdhci_reset,
>> + .set_uhs_signaling = sdhci_set_uhs_signaling,
>> + .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> +};
>> +
>> +static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
>> + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
>> + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
>> + SDHCI_QUIRK_SINGLE_POWER_WRITE |
>> + SDHCI_QUIRK_NO_HISPD_BIT |
>> + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
>> + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
>> + .ops = &tegra114_sdhci_ops,
>> +};
>> +
>> +static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
>> + .pdata = &sdhci_tegra114_pdata,
>> +};
>> +
>> +static const struct sdhci_ops tegra124_sdhci_ops = {
>> + .get_ro = tegra_sdhci_get_ro,
>> + .read_w = tegra_sdhci_readw,
>> + .write_w = tegra_sdhci_writew,
>> + .write_l = tegra_sdhci_writel,
>> + .set_clock = tegra_sdhci_set_clock,
>> .set_bus_width = tegra_sdhci_set_bus_width,
>> .reset = tegra_sdhci_reset,
>> .platform_execute_tuning = tegra_sdhci_execute_tuning,
>> @@ -322,7 +354,7 @@ static const struct sdhci_ops tegra114_sdhci_ops = {
>> .get_max_clock = tegra_sdhci_get_max_clock,
>> };
>>
>> -static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
>> +static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
>> .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
>> SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
>> SDHCI_QUIRK_SINGLE_POWER_WRITE |
>> @@ -330,11 +362,11 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
>> SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
>> SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
>> .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
>> - .ops = &tegra114_sdhci_ops,
>> + .ops = &tegra124_sdhci_ops,
>> };
>>
>> -static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
>> - .pdata = &sdhci_tegra114_pdata,
>> +static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
>> + .pdata = &sdhci_tegra124_pdata,
>> .nvquirks = NVQUIRK_ENABLE_SDR50 |
>> NVQUIRK_ENABLE_DDR50 |
>> NVQUIRK_ENABLE_SDR104,
>> @@ -357,7 +389,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
>>
>> static const struct of_device_id sdhci_tegra_dt_match[] = {
>> { .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 },
>> - { .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra114 },
>> + { .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra124 },
>> { .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
>> { .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
>> { .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 },
>> --
>> 2.1.4
>>
next prev parent reply other threads:[~2016-02-25 9:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-18 14:48 [PATCH] mmc: tegra: Disable UHS-I modes for tegra114 Jon Hunter
[not found] ` <1455806924-14967-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-02-18 16:07 ` Ulf Hansson
[not found] ` <CAPDyKFowEH=4PU1ErNxMA0=SiDT1Q86H0SfMuiH5jA+H7mvquA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-25 9:42 ` Jon Hunter [this message]
[not found] ` <56CECC9E.9010501-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-02-25 19:32 ` Lucas Stach
[not found] ` <1456428771.7433.4.camel-8ppwABl0HbeELgA04lAiVw@public.gmane.org>
2016-02-25 23:10 ` Adrian Hunter
[not found] ` <56CF89DF.1000206-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2016-02-26 9:39 ` Jon Hunter
2016-02-26 8:58 ` Jon Hunter
2016-02-26 9:34 ` Jon Hunter
[not found] ` <1456479257-12147-1-git-send-email-jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-02-26 9:35 ` Jon Hunter
2016-02-26 17:47 ` Lucas Stach
2016-02-29 6:43 ` Thierry Reding
2016-03-02 13:50 ` Adrian Hunter
2016-03-04 9:41 ` Ulf Hansson
2016-03-16 12:32 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56CECC9E.9010501@nvidia.com \
--to=jonathanh-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=dev-8ppwABl0HbeELgA04lAiVw@public.gmane.org \
--cc=gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox