Re: [PATCH V7 03/12] thermal: tegra: get rid of PDIV/HOTSPOT hack

[Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

On 2016年03月15日 04:05, Eduardo Valentin wrote:
> * PGP Signed by an unknown key
> 
> On Fri, Mar 11, 2016 at 11:09:14AM +0800, Wei Ni wrote:
>> Get rid of T124-specific PDIV/HOTSPOT hack.
>> tegra-soctherm.c contained a hack to set the SENSOR_PDIV and
>> SENSOR_HOTSPOT_OFFSET registers - it just did two writes of
>> T124-specific opaque values.  Convert these into a form that can be
>> substituted on a per-chip basis, and into structure fields that have
>> at least some independent meaning.
>>
>> Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>> ---
>>  drivers/thermal/tegra/tegra-soctherm.c | 18 ++++++++++++++----
>>  1 file changed, 14 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/thermal/tegra/tegra-soctherm.c b/drivers/thermal/tegra/tegra-soctherm.c
>> index b3ec0faa2bee..b4b791ebfbb6 100644
>> --- a/drivers/thermal/tegra/tegra-soctherm.c
>> +++ b/drivers/thermal/tegra/tegra-soctherm.c
>> @@ -48,14 +48,12 @@
>>  #define SENSOR_CONFIG2_THERMB_SHIFT		0
>>  
>>  #define SENSOR_PDIV				0x1c0
>> -#define SENSOR_PDIV_T124			0x8888
>>  #define SENSOR_PDIV_CPU_MASK			(0xf << 12)
>>  #define SENSOR_PDIV_GPU_MASK			(0xf << 8)
>>  #define SENSOR_PDIV_MEM_MASK			(0xf << 4)
>>  #define SENSOR_PDIV_PLLX_MASK			(0xf << 0)
>>  
>>  #define SENSOR_HOTSPOT_OFF			0x1c4
>> -#define SENSOR_HOTSPOT_OFF_T124			0x00060600
>>  #define SENSOR_HOTSPOT_CPU_MASK			(0xff << 16)
>>  #define SENSOR_HOTSPOT_GPU_MASK			(0xff << 8)
>>  #define SENSOR_HOTSPOT_MEM_MASK			(0xff << 0)
>> @@ -436,6 +434,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>>  	struct resource *res;
>>  	unsigned int i;
>>  	int err;
>> +	u32 pdiv, hotspot;
>>  
>>  	const struct tegra_tsensor *tsensors = t124_tsensors;
>>  	const struct tegra_tsensor_group **ttgs = tegra124_tsensor_groups;
>> @@ -493,8 +492,19 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
>>  			goto disable_clocks;
>>  	}
>>  
>> -	writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
>> -	writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
>> +	/* Program pdiv and hotspot offsets per THERM */
>> +	pdiv = readl(tegra->regs + SENSOR_PDIV);
>> +	hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
>> +	for (i = 0; i < TEGRA124_SOCTHERM_SENSOR_NUM; ++i) {
>> +		pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
>> +				    ttgs[i]->pdiv);
>> +		if (ttgs[i]->id != TEGRA124_SOCTHERM_SENSOR_PLLX)
>> +			hotspot =  REG_SET_MASK(hotspot,
>> +						ttgs[i]->pllx_hotspot_mask,
>> +						ttgs[i]->pllx_hotspot_diff);
>> +	}
>> +	writel(pdiv, tegra->regs + SENSOR_PDIV);
>> +	writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
> 
> Is the above logic the same for all supported chips? e.g. do we always
> skip pllx for hotspot configuration?

Yes, this logic support Tegra124, Tegra210, and Tegra132 which I will send out
in next series.

> 
> 
>>  
>>  	/* Initialize thermctl sensors */
>>  
>> -- 
>> 1.9.1
>>
> 
> * Unknown Key
> * 0x7DA4E256
>