From mboxrd@z Thu Jan 1 00:00:00 1970 From: JC Kuo Subject: Re: [PATCH v4 3/5] dt-bindings: phy: tegra: Add Tegra194 support Date: Thu, 17 Oct 2019 15:48:52 +0800 Message-ID: <57692050-8284-a31f-71fd-7441823f3f2b@nvidia.com> References: <20191009024343.30218-1-jckuo@nvidia.com> <20191009024343.30218-4-jckuo@nvidia.com> <20191009233900.GA9109@bogus> <20191014131752.GF422231@ulmo> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Thierry Reding Cc: Greg Kroah-Hartman , Jon Hunter , Kishon Vijay Abraham I , linux-tegra@vger.kernel.org, Linux USB List , "linux-kernel@vger.kernel.org" , devicetree@vger.kernel.org, Nagarjuna Kristam List-Id: linux-tegra@vger.kernel.org Hi Thierry, Hi Rob, Hi Kishon, Please let me know your thoughts of the below implementation. 1. Add a "bool disable_gen2" to "phy->attrs" structure. 2. In _of_phy_get() of phy-core.c to add the follow to parse a generic property. phy->attrs.disable_gen2 = of_property_read_bool(args.np, "usb-disable-gen2"); 3. In individual phy driver, to add SOC/PHY specific programming accordingly. Thanks, JC On 10/14/19 9:40 PM, Rob Herring wrote: > On Mon, Oct 14, 2019 at 8:17 AM Thierry Reding wrote: >> >> On Wed, Oct 09, 2019 at 06:39:00PM -0500, Rob Herring wrote: >>> On Wed, Oct 09, 2019 at 10:43:41AM +0800, JC Kuo wrote: >>>> Extend the bindings to cover the set of features found in Tegra194. >>>> Note that, technically, there are four more supplies connected to the >>>> XUSB pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL) >>>> , but the power sequencing requirements of Tegra194 require these to be >>>> under the control of the PMIC. >>>> >>>> Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it is >>>> possible for some platforms have long signal trace that could not >>>> provide sufficient electrical environment for Gen 2 speed. To deal with >>>> this, a new device node property "nvidia,disable-gen2" was added to >>>> Tegra194 that be used to specifically disable Gen 2 speed for a >>>> particular USB 3.0 port so that the port can be limited to Gen 1 speed >>>> and avoid the instability. >>> >>> I suspect this may be a common issue and we should have a common >>> property. Typically, this kind of property is in the controller though >>> and supports multiple speed limits. See PCI bindings for inspiration. >> >> Given that support for gen 2 speeds is dependent on signal trace length, >> it doesn't really make sense to restrict the whole controller to a given >> speed if only the signal trace for a single port exceeds the limit for >> which gen 2 would work. >> >> Also, the USB PHYs are in a different hardware block than the USB >> controller, so this really is a property of the PHY block, not the USB >> controller. > > Okay, but still should be common for USB PHYs IMO. > > Rob >