From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shardar Mohammed Subject: RE: [PATCH] serial: tegra: Map the iir register to default defines Date: Fri, 31 Mar 2017 10:42:11 +0000 Message-ID: <79efc1286adc4119be65e0b237aebbc3@bgmail102.nvidia.com> References: <20170329184806.6577-1-oliver@schinagl.nl> <58DCDB54.5040005@nvidia.com> <83c51151685d4be7926f7f3982c59db8@bgmail102.nvidia.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: Content-Language: en-US Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Jonathan Hunter , Laxman Dewangan , Olliver Schinagl , Greg Kroah-Hartman , Jiri Slaby , Stephen Warren , Thierry Reding , Alexandre Courbot Cc: "linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" List-Id: linux-tegra@vger.kernel.org > On 31/03/17 11:07, Shardar Mohammed wrote: > > Verification failed on Tegra. > > Fix here is, IIR should be masked with UART_IIR_MASK after reading the IIR > register as on Tegra bit-6 is used for internal usage to know if FIFO mode is > enabled. > > while (1) { > > iir = tegra_uart_read(tup, UART_IIR); > > +iir &= UART_IIR_MASK; > > Per Olliver's original email did you pick up the other patch [0] before applying > this because that does apply the mask. I mentioned to Olliver that this should > really be a series, so it is clear that this patch is dependent upon the other. For UART_IIR_MASK macro, dependent patch is required if we add this required line. But here to fix the issue with the current patch above masking step is necessary. > > > -----Original Message----- > > From: Laxman Dewangan > > Sent: Thursday, March 30, 2017 3:48 PM > > To: Olliver Schinagl ; Greg Kroah-Hartman > > ; Jiri Slaby ; Stephen > > Warren ; Thierry Reding > > ; Alexandre Courbot > > Cc: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; > > linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Shardar Mohammed > > > Subject: Re: [PATCH] serial: tegra: Map the iir register to default > > defines > > > > > > On Thursday 30 March 2017 12:18 AM, Olliver Schinagl wrote: > >> The tegra serial IP seems to be following the common layout and the > >> interrupt ID's match up nicely. Replace the magic values to match the > >> common serial_reg defines, with the addition of the Tegra unique End > >> of Data interrupt. > >> > >> Signed-off-by: Olliver Schinagl > >> --- > > > > Adding Shardar for verifications. > > > > Acked-by: Laxman Dewangan > > Furthermore does this ACK imply that you have reviewed the other patch this > one is dependent upon? > Yes dependent change looks fine, but I have not tested it. > Cheers > Jon > > [0] http://marc.info/?l=linux-serial&m=149081309627392&w=2 > > -- > nvpublic