Re: [PATCH v3 0/5] Add JDI LPM102A188A display panel support

[Thierry Reding <thierry.reding@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1711 bytes --]

On Mon, Aug 07, 2023 at 02:33:00PM +0100, Diogo Ivo wrote:
> Hello,
> 
> These patches add support for the JDI LPM102A188A display panel,
> found in the Google Pixel C.
> 
> Patch 1 adds the DT bindings for the panel.
> 
> Patch 2 adds the panel driver, which is based on the downstream
> kernel driver published by Google and developed by Sean Paul.
> 
> Patches 3-5 add DT nodes for the regulator, backlight controller and
> display panel. 
> 
> The first version of this patch series can be found at:
> https://lore.kernel.org/all/20220929170502.1034040-1-diogo.ivo@tecnico.ulisboa.pt/
> 
> The first submission of v2 can be found at:
> https://lore.kernel.org/all/20221025153746.101278-1-diogo.ivo@tecnico.ulisboa.pt/
> 
> Changes in v2:
>  - Patch 1: remove touchscreen reset gpio property
>  - Patch 2: clear register based on its value rather than a DT property
>  - Patch 3: tune backlight delay values
>  - Patch 4: add generic node names, remove underscores
> 
> Changes in v3:
>  - Patch 1: add Reviewed-by
>  - Patch 2: fix error handling, remove enabled/prepared booleans, add
>    dc/dc setting
>  - Patches 3-5: Split previous patch 3 into three different patches,
>    each adding a separate node 
>  - removed previous patch 2 pertaining to Tegra DSI reset as it was upstreamed
> 
> Diogo Ivo (5):
>   dt-bindings: display: Add bindings for JDI LPM102A188A
>   drm/panel: Add driver for JDI LPM102A188A
>   arm64: dts: smaug: Add DSI/CSI regulator
>   arm64: dts: smaug: Add backlight node
>   arm64: dts: smaug: Add display panel node

I've picked up patches 3-5 into the Tegra tree and I assume the other
two will go in through drm-misc?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]