Re: [RFC PATCH v9 6/9] media: tegra: Add Tegra210 Video input driver

[Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

23.04.2020 19:50, Sowjanya Komatineni пишет:
> 
> On 4/23/20 12:48 AM, Hans Verkuil wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 22/04/2020 08:18, Sowjanya Komatineni wrote:
>>> Tegra210 contains a powerful Video Input (VI) hardware controller
>>> which can support up to 6 MIPI CSI camera sensors.
>>>
>>> Each Tegra CSI port can be one-to-one mapped to VI channel and can
>>> capture from an external camera sensor connected to CSI or from
>>> built-in test pattern generator.
>>>
>>> Tegra210 supports built-in test pattern generator from CSI to VI.
>>>
>>> This patch adds a v4l2 capture driver with media interface for
>>> Tegra210 built-in CSI to VI test pattern generator.
>>>
>>> This patch includes TPG support only and all the video pipeline
>>> configuration happens through the video device node.
>>>
>>> Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>> Signed-off-by: Sowjanya Komatineni <skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>>> ---
>>>   drivers/staging/media/Kconfig          |    2 +
>>>   drivers/staging/media/Makefile         |    1 +
>>>   drivers/staging/media/tegra/Kconfig    |   13 +
>>>   drivers/staging/media/tegra/Makefile   |    8 +
>>>   drivers/staging/media/tegra/TODO       |   10 +
>>>   drivers/staging/media/tegra/common.h   |  262 ++++++++
>>>   drivers/staging/media/tegra/csi.c      |  606 +++++++++++++++++
>>>   drivers/staging/media/tegra/csi.h      |  149 +++++
>>>   drivers/staging/media/tegra/tegra210.c |  709 ++++++++++++++++++++
>>>   drivers/staging/media/tegra/tegra210.h |  190 ++++++
>>>   drivers/staging/media/tegra/vi.c       | 1132
>>> ++++++++++++++++++++++++++++++++
>>>   drivers/staging/media/tegra/vi.h       |   83 +++
>>>   drivers/staging/media/tegra/video.c    |  153 +++++
>>>   drivers/staging/media/tegra/video.h    |   34 +
>>>   14 files changed, 3352 insertions(+)
>>>   create mode 100644 drivers/staging/media/tegra/Kconfig
>>>   create mode 100644 drivers/staging/media/tegra/Makefile
>>>   create mode 100644 drivers/staging/media/tegra/TODO
>>>   create mode 100644 drivers/staging/media/tegra/common.h
>>>   create mode 100644 drivers/staging/media/tegra/csi.c
>>>   create mode 100644 drivers/staging/media/tegra/csi.h
>>>   create mode 100644 drivers/staging/media/tegra/tegra210.c
>>>   create mode 100644 drivers/staging/media/tegra/tegra210.h
>>>   create mode 100644 drivers/staging/media/tegra/vi.c
>>>   create mode 100644 drivers/staging/media/tegra/vi.h
>>>   create mode 100644 drivers/staging/media/tegra/video.c
>>>   create mode 100644 drivers/staging/media/tegra/video.h
>> With 'make menuconfig' I get this:
>>
>> scripts/kconfig/mconf  Kconfig
>>
>> WARNING: unmet direct dependencies detected for TEGRA_HOST1X
>>    Depends on [n]: HAS_IOMEM [=y] && (ARCH_TEGRA || ARM &&
>> COMPILE_TEST [=y])
>>    Selected by [y]:
>>    - VIDEO_TEGRA [=y] && STAGING [=y] && STAGING_MEDIA [=y] &&
>> MEDIA_SUPPORT [=y] && (ARCH_TEGRA || COMPILE_TEST [=y])
>>
>> This is an x86_64 build with COMPILE_TEST set. I can provide my full
>> .config if you need it.
>>
>> CONFIG_TEGRA_HOST1X=y
>> CONFIG_VIDEO_TEGRA=y
>>
>> Regards,
>>
>>          Hans
> 
> Hi Hans,
> 
> In v7, changed Kconfig to remove ARM. But looks like we should limit
> 
> TEGRA_HOST1X also limits compile to ARM only so running VIDEO_TEGRA on
> x86_64 shows above warning.
> 
> We should limit compile to ARM for CONFIG_VIDEO_TEGRA.
> 
> Will update CONFIG_VIDEO_TEGRA dependency to use ARM && COMPILE_TEST
> like I had in previous version. Sorry about this.
> 
> 
> Also, I see some changes went into latest linux-next staging media
> Kconfig, So, will have my patches on top of today's linux-next.

VIDEO_TEGRA should depend on TEGRA_HOST1X and not select it.

depends on (ARCH_TEGRA && TEGRA_HOST1X) || COMPILE_TEST