Re: [PATCH] i2c: tegra: Fix i2c-tegra DMA config option processing

[Parker Newman <pnewman@connecttech.com>]

On 2023-08-06 10:21, Akhil R wrote:
>>
>> BTW...
>>
>> On Thu, Aug 03, 2023 at 05:10:02PM +0000, Parker Newman wrote:
>>>
>>
>> you have a blank line here.
>>
>>> This patch fixes the Tegra DMA config option processing in the
>>> i2c-tegra driver.
>>>
>>> Tegra processors prior to Tegra186 used APB DMA for I2C requiring
>>> CONFIG_TEGRA20_APB_DMA=y while Tegra186 and later use GPC DMA
>>> requiring CONFIG_TEGRA186_GPC_DMA=y.
>>>
>>> The check for if the processor uses APB DMA is inverted and so the
>>> wrong DMA config options are checked.
>>>
>>> This means if CONFIG_TEGRA20_APB_DMA=y but
>> CONFIG_TEGRA186_GPC_DMA=n
>>> with a Tegra186 or later processor the driver will incorrectly think
>>> DMA is enabled and attempt to request DMA channels that will never be
>>> availible, leaving the driver in a perpetual EPROBE_DEFER state.
>>>
>>> Signed-off-by: Parker Newman <pnewman@connecttech.com>
>>
>> As this is a fix you also need to add
>>
>> Fixes: 48cb6356fae1 ("i2c: tegra: Add GPCDMA support")
>> Cc: Akhil R <akhilrajeev@nvidia.com>
>> Cc: <stable@vger.kernel.org> # v6.1+
>>
>> Cc'eing Akhil as well for his opinion on this.
> The fix looks valid to me. Must have been a typo there.
> 
> Regards,
> Akhil
> 
Yes it appears to be a simple typo and if you have both DMA Config options 
set the bug would get missed. 

I am new to the Linux mailing list, should I send a new message to 
stable@vger.kernel.org or CC them on this one?

Thanks,
Parker