Re: [PATCH 1/4] gpu: host1x: Enable Tegra186 syncpoint protection

[Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 19.08.2017 13:35, Mikko Perttunen wrote:
> On 08/19/2017 01:09 PM, Dmitry Osipenko wrote:
>> On 19.08.2017 11:10, Mikko Perttunen wrote:
>> [snip]
>>>>> +    host1x_hw_syncpt_set_protection(host, true);
>>>>
>>>> Is it really okay to force the protection? Maybe protection should be enabled
>>>> with a respect to CONFIG_TEGRA_HOST1X_FIREWALL? In that case we would have to
>>>> avoid software jobs validation for Tegra124+.
>>>
>>> I don't quite get your comment. The hardware syncpt protection layer being
>>> enabled should never hurt - it doesn't mess with any valid jobs. It's also only
>>> on Tegra186 so I'm not sure where the Tegra124 comes from.
>>
>> Right, it's the gather filter on T124+, my bad. This raises several questions.
>>
>> 1) Why we have CONFIG_TEGRA_HOST1X_FIREWALL? Should it be always enforced or we
>> actually want to be a bit more flexible and allow to disable it. Imagine that
>> you are making a custom application and want to utilize channels in a
>> different way.
> 
> I think it should be up to the user to decide whether they want the firewall or
> not. It's clearly the most useful on the older chips - especially Tegra20 due to
> lack of IOMMU. The performance penalty is too great to force it on always.
> 

Of course there is some overhead but is not that great. Usually command buffer
contains just a dozen of commands. It should be an interesting challenge to
optimize its performance though.

> The programming model should always be considered the same - the rules of what
> you are allowed to do are the same whether the firewall, or any
> hardware-implemented protection features, are on or not.
> 

Well, okay.

>>
>> 2) Since syncpoint protection is a T186 feature, what about previous
>> generations? Should we validate syncpoints in software for them? We have
>> 'syncpoint validation' patch staged in grate's kernel
>> https://github.com/grate-driver/linux/commit/c8b6c82173f2ee9fead23380e8330b8099e7d5e7
>>
>> (I'll start sending out this and other patches after a bit more thorough
>> testing.) Improperly used syncpoints potentially could allow one program to
>> damage others.
> 
> Yes, I think the firewall should have this feature for older generations. We
> could disable the check on Tegra186, as you point towards in question 4.
> 
>>
>> 3) What exactly does gather filter? Could you list all the commands that it
>> filters out, please?
> 
> According to the Tegra186 TRM (section 16.8.32), SETCLASS, SETSTRMID and EXTEND
> are filtered.
> 

Okay, then what about SETSTRMID command, I don't see its disassembly in the
host1x gather debug dump. Is it accidentally missed?

>>
>> 4) What about T30/T114 that do not have gather filter? Should we validate those
>> commands for them in a software firewall?
> 
> Yes, the firewall should validate that.
> 
>>
>> So maybe we should implement several layers of validation in the SW firewall.
>> Like all layers for T20 (memory boundaries validation etc), software gather
>> filter for T30/114 and software syncpoint validation for T30/114/124/210.
>>
> 
> That seems like a good idea.

Alright, factoring out firewall from job.c probably should be the first step.

-- 
Dmitry