From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: rostedt@goodmis.org, linux-trace-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
mhiramat@kernel.org, alistair@popple.id.au, joel@jms.id.au,
jk@ozlabs.org, andrew@aj.id.au, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, eajames@linux.ibm.com
Subject: [PATCH v7 0/7] fsi: Add IBM I2C Responder virtual FSI master
Date: Fri, 3 Mar 2023 11:04:09 -0600 [thread overview]
Message-ID: <20230303170416.1347530-1-eajames@linux.ibm.com> (raw)
The I2C Responder (I2CR) is an I2C device that translates I2C commands
to CFAM or SCOM operations, effectively implementing an FSI master and
bus.
Changes since v6:
- Drop conversions to BE except in the FSI core interface
- Emulate the CFAM config table since it doesn't exist off the I2CR
- Drop status check during probe
- Add release function for device
- Update SCOM driver with newer interfaces and drop BE conversion
- New sbefifo change to not check state during probe
Changes since v5:
- Make I2CR scom driver depend on I2CR FSI master
Changes since v4:
- Add I2CR scom driver and associated patches
- Use compatible strings for FSI drivers if specified
- Include aliased device numbering patch
- Restructure the trace events to eliminate holes
Changes since v3:
- Rework the endian-ness in i2cr_write
- Rework the tracing to include the i2c bus and device address
Changes since v2:
- Fix the bindings again, sorry for the spam
Changes since v1:
- Fix the binding document
- Change the binding name
- Clean up the size argument checking
- Reduce __force by using packed struct for the command
Eddie James (7):
fsi: Move fsi_slave structure definition to header
dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master
fsi: Add IBM I2C Responder virtual FSI master
fsi: Add I2C Responder SCOM driver
fsi: Add aliased device numbering
fsi: Use of_match_table for bus matching if specified
fsi: sbefifo: Don't check status during probe
.../bindings/fsi/ibm,i2cr-fsi-master.yaml | 41 +++
drivers/fsi/Kconfig | 17 +
drivers/fsi/Makefile | 2 +
drivers/fsi/fsi-core.c | 60 ++--
drivers/fsi/fsi-master-aspeed.c | 2 +-
drivers/fsi/fsi-master-ast-cf.c | 2 +-
drivers/fsi/fsi-master-gpio.c | 2 +-
drivers/fsi/fsi-master-hub.c | 2 +-
drivers/fsi/fsi-master-i2cr.c | 312 ++++++++++++++++++
drivers/fsi/fsi-master-i2cr.h | 24 ++
drivers/fsi/fsi-master.h | 3 +-
drivers/fsi/fsi-sbefifo.c | 8 -
drivers/fsi/fsi-scom.c | 8 +
drivers/fsi/fsi-slave.h | 28 ++
drivers/fsi/i2cr-scom.c | 154 +++++++++
include/trace/events/fsi_master_i2cr.h | 107 ++++++
16 files changed, 737 insertions(+), 35 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
create mode 100644 drivers/fsi/fsi-master-i2cr.c
create mode 100644 drivers/fsi/fsi-master-i2cr.h
create mode 100644 drivers/fsi/fsi-slave.h
create mode 100644 drivers/fsi/i2cr-scom.c
create mode 100644 include/trace/events/fsi_master_i2cr.h
--
2.31.1
next reply other threads:[~2023-03-03 17:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-03 17:04 Eddie James [this message]
2023-03-03 17:04 ` [PATCH v7 1/7] fsi: Move fsi_slave structure definition to header Eddie James
2023-03-03 17:04 ` [PATCH v7 2/7] dt-bindings: fsi: Document the IBM I2C Responder virtual FSI master Eddie James
2023-03-03 17:04 ` [PATCH v7 3/7] fsi: Add " Eddie James
2023-03-03 17:04 ` [PATCH v7 4/7] fsi: Add I2C Responder SCOM driver Eddie James
2023-03-04 12:40 ` kernel test robot
2023-03-03 17:04 ` [PATCH v7 5/7] fsi: Add aliased device numbering Eddie James
2023-03-03 17:04 ` [PATCH v7 6/7] fsi: Use of_match_table for bus matching if specified Eddie James
2023-03-03 17:04 ` [PATCH v7 7/7] fsi: sbefifo: Don't check status during probe Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230303170416.1347530-1-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-fsi@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).