* [PATCH] tracing/probes: Differentiate BTF support from start of function
@ 2023-07-17 20:39 Steven Rostedt
2023-07-18 0:00 ` Masami Hiramatsu
0 siblings, 1 reply; 2+ messages in thread
From: Steven Rostedt @ 2023-07-17 20:39 UTC (permalink / raw)
To: Linux Trace Kernel, LKML; +Cc: Masami Hiramatsu, Mark Rutland
From: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Having a typo in the function name to trace one of the arguments using
BTF, gave me an error message that BTF was not supported by this kernel:
~# echo 'p:lock __raw_spin_lock lock=lock' > /sys/kernel/tracing/kprobe_events
-bash: echo: write error: Invalid argument
~# cat /sys/kernel/tracing/error_log
[ 34.382149] trace_kprobe: error: BTF is not available or not supported
Command: p:lock __raw_spin_lock lock=lock
^
I added two underscores instead of one underscore for the function
_raw_spin_lock(). But I spent too much time trying to figure out why BTF
was not supported, because in reality it was! The problem was that the
function wasn't found (this could happen if a function offset is used as
well).
Instead, add a new error message that gives a better description of the
problem.
~# echo 'p:lock __raw_spin_lock lock=lock' > /sys/kernel/tracing/kprobe_events
-bash: echo: write error: Invalid argument
~# cat /sys/kernel/tracing/error_log
[ 45.922742] trace_kprobe: error: BTF arg can be used only on function entry
Command: p:lock __raw_spin_lock lock=lock
^
Fixes: b576e09701c7d ("tracing/probes: Support function parameters if BTF is available")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
kernel/trace/trace_probe.c | 2 +-
kernel/trace/trace_probe.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
index cf504efd0694..328a51b1d068 100644
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -1023,7 +1023,7 @@ parse_probe_arg(char *arg, const struct fetch_type *type,
default:
if (isalpha(arg[0]) || arg[0] == '_') { /* BTF variable */
if (!tparg_is_function_entry(ctx->flags)) {
- trace_probe_log_err(ctx->offset, NOSUP_BTFARG);
+ trace_probe_log_err(ctx->offset, NOFENTRY_BTFARG);
return -EINVAL;
}
ret = parse_btf_arg(arg, pcode, end, ctx);
diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
index 604d6fb9c5ff..554fe2995ca1 100644
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -493,6 +493,7 @@ extern int traceprobe_define_arg_fields(struct trace_event_call *event_call,
C(BAD_ATTACH_ARG, "Attached event does not have this field"),\
C(NO_EP_FILTER, "No filter rule after 'if'"), \
C(NOSUP_BTFARG, "BTF is not available or not supported"), \
+ C(NOFENTRY_BTFARG, "BTF arg can be used only on function entry"), \
C(NO_BTFARG, "This variable is not found at this probe point"),\
C(NO_BTF_ENTRY, "No BTF entry for this probe point"), \
C(BAD_VAR_ARGS, "$arg* must be an independent parameter without name etc."),\
--
2.40.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] tracing/probes: Differentiate BTF support from start of function
2023-07-17 20:39 [PATCH] tracing/probes: Differentiate BTF support from start of function Steven Rostedt
@ 2023-07-18 0:00 ` Masami Hiramatsu
0 siblings, 0 replies; 2+ messages in thread
From: Masami Hiramatsu @ 2023-07-18 0:00 UTC (permalink / raw)
To: Steven Rostedt; +Cc: Linux Trace Kernel, LKML, Masami Hiramatsu, Mark Rutland
On Mon, 17 Jul 2023 16:39:47 -0400
Steven Rostedt <rostedt@goodmis.org> wrote:
> From: "Steven Rostedt (Google)" <rostedt@goodmis.org>
>
> Having a typo in the function name to trace one of the arguments using
> BTF, gave me an error message that BTF was not supported by this kernel:
>
> ~# echo 'p:lock __raw_spin_lock lock=lock' > /sys/kernel/tracing/kprobe_events
> -bash: echo: write error: Invalid argument
> ~# cat /sys/kernel/tracing/error_log
> [ 34.382149] trace_kprobe: error: BTF is not available or not supported
> Command: p:lock __raw_spin_lock lock=lock
> ^
>
> I added two underscores instead of one underscore for the function
> _raw_spin_lock(). But I spent too much time trying to figure out why BTF
> was not supported, because in reality it was! The problem was that the
> function wasn't found (this could happen if a function offset is used as
> well).
Thanks for reporting!
>
> Instead, add a new error message that gives a better description of the
> problem.
>
> ~# echo 'p:lock __raw_spin_lock lock=lock' > /sys/kernel/tracing/kprobe_events
> -bash: echo: write error: Invalid argument
> ~# cat /sys/kernel/tracing/error_log
> [ 45.922742] trace_kprobe: error: BTF arg can be used only on function entry
> Command: p:lock __raw_spin_lock lock=lock
> ^
This looks good to me.
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Thank you!
> Fixes: b576e09701c7d ("tracing/probes: Support function parameters if BTF is available")
> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
> ---
> kernel/trace/trace_probe.c | 2 +-
> kernel/trace/trace_probe.h | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
> index cf504efd0694..328a51b1d068 100644
> --- a/kernel/trace/trace_probe.c
> +++ b/kernel/trace/trace_probe.c
> @@ -1023,7 +1023,7 @@ parse_probe_arg(char *arg, const struct fetch_type *type,
> default:
> if (isalpha(arg[0]) || arg[0] == '_') { /* BTF variable */
> if (!tparg_is_function_entry(ctx->flags)) {
> - trace_probe_log_err(ctx->offset, NOSUP_BTFARG);
> + trace_probe_log_err(ctx->offset, NOFENTRY_BTFARG);
> return -EINVAL;
> }
> ret = parse_btf_arg(arg, pcode, end, ctx);
> diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
> index 604d6fb9c5ff..554fe2995ca1 100644
> --- a/kernel/trace/trace_probe.h
> +++ b/kernel/trace/trace_probe.h
> @@ -493,6 +493,7 @@ extern int traceprobe_define_arg_fields(struct trace_event_call *event_call,
> C(BAD_ATTACH_ARG, "Attached event does not have this field"),\
> C(NO_EP_FILTER, "No filter rule after 'if'"), \
> C(NOSUP_BTFARG, "BTF is not available or not supported"), \
> + C(NOFENTRY_BTFARG, "BTF arg can be used only on function entry"), \
> C(NO_BTFARG, "This variable is not found at this probe point"),\
> C(NO_BTF_ENTRY, "No BTF entry for this probe point"), \
> C(BAD_VAR_ARGS, "$arg* must be an independent parameter without name etc."),\
> --
> 2.40.1
>
--
Masami Hiramatsu (Google) <mhiramat@kernel.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-07-18 0:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-17 20:39 [PATCH] tracing/probes: Differentiate BTF support from start of function Steven Rostedt
2023-07-18 0:00 ` Masami Hiramatsu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).