From: "Björn Töpel" <bjorn@kernel.org>
To: Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
linux-riscv@lists.infradead.org, Guo Ren <guoren@kernel.org>
Cc: "Björn Töpel" <bjorn@rivosinc.com>,
linux-kernel@vger.kernel.org, linux-trace-kernel@vger.kernel.org,
"Nam Cao" <namcaov@gmail.com>,
"kernel test robot" <lkp@intel.com>
Subject: [PATCH v2] riscv: Only consider swbp/ss handlers for correct privileged mode
Date: Sun, 27 Aug 2023 13:40:03 +0200 [thread overview]
Message-ID: <20230827114003.224958-1-bjorn@kernel.org> (raw)
From: Björn Töpel <bjorn@rivosinc.com>
RISC-V software breakpoint trap handlers are used for {k,u}probes.
When trapping from kernelmode, only the kernelmode handlers should be
considered. Vice versa, only usermode handlers for usermode
traps. This is not the case on RISC-V, which can trigger a bug if a
userspace process uses uprobes, and a WARN() is triggered from
kernelmode (which is implemented via {c.,}ebreak).
The kernel will trap on the kernelmode {c.,}ebreak, look for uprobes
handlers, realize incorrectly that uprobes need to be handled, and
exit the trap handler early. The trap returns to re-executing the
{c.,}ebreak, and enter an infinite trap-loop.
The issue was found running the BPF selftest [1].
Fix this issue by only considering the swbp/ss handlers for
kernel/usermode respectively. Also, move CONFIG ifdeffery from traps.c
to the asm/{k,u}probes.h headers.
Note that linux/uprobes.h only include asm/uprobes.h if CONFIG_UPROBES
is defined, which is why asm/uprobes.h needs to be unconditionally
included in traps.c
Link: https://lore.kernel.org/linux-riscv/87v8d19aun.fsf@all.your.base.are.belong.to.us/ # [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308271841.HlnnHFL7-lkp@intel.com/
Reviewed-by: Guo Ren <guoren@kernel.org>
Fixes: 74784081aac8 ("riscv: Add uprobes supported")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
---
v1->v2: Fix Clang build warning (kernel test robot)
---
arch/riscv/include/asm/kprobes.h | 11 ++++++++++-
arch/riscv/include/asm/uprobes.h | 13 ++++++++++++-
arch/riscv/kernel/traps.c | 28 ++++++++++++++++++----------
3 files changed, 40 insertions(+), 12 deletions(-)
diff --git a/arch/riscv/include/asm/kprobes.h b/arch/riscv/include/asm/kprobes.h
index e7882ccb0fd4..78ea44f76718 100644
--- a/arch/riscv/include/asm/kprobes.h
+++ b/arch/riscv/include/asm/kprobes.h
@@ -40,6 +40,15 @@ void arch_remove_kprobe(struct kprobe *p);
int kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr);
bool kprobe_breakpoint_handler(struct pt_regs *regs);
bool kprobe_single_step_handler(struct pt_regs *regs);
-
+#else
+static inline bool kprobe_breakpoint_handler(struct pt_regs *regs)
+{
+ return false;
+}
+
+static inline bool kprobe_single_step_handler(struct pt_regs *regs)
+{
+ return false;
+}
#endif /* CONFIG_KPROBES */
#endif /* _ASM_RISCV_KPROBES_H */
diff --git a/arch/riscv/include/asm/uprobes.h b/arch/riscv/include/asm/uprobes.h
index f2183e00fdd2..3fc7deda9190 100644
--- a/arch/riscv/include/asm/uprobes.h
+++ b/arch/riscv/include/asm/uprobes.h
@@ -34,7 +34,18 @@ struct arch_uprobe {
bool simulate;
};
+#ifdef CONFIG_UPROBES
bool uprobe_breakpoint_handler(struct pt_regs *regs);
bool uprobe_single_step_handler(struct pt_regs *regs);
-
+#else
+static inline bool uprobe_breakpoint_handler(struct pt_regs *regs)
+{
+ return false;
+}
+
+static inline bool uprobe_single_step_handler(struct pt_regs *regs)
+{
+ return false;
+}
+#endif /* CONFIG_UPROBES */
#endif /* _ASM_RISCV_UPROBES_H */
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index f798c853bede..cd6f10c73a16 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -13,6 +13,8 @@
#include <linux/kdebug.h>
#include <linux/uaccess.h>
#include <linux/kprobes.h>
+#include <linux/uprobes.h>
+#include <asm/uprobes.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/irq.h>
@@ -246,22 +248,28 @@ static inline unsigned long get_break_insn_length(unsigned long pc)
return GET_INSN_LENGTH(insn);
}
+static bool probe_single_step_handler(struct pt_regs *regs)
+{
+ bool user = user_mode(regs);
+
+ return user ? uprobe_single_step_handler(regs) : kprobe_single_step_handler(regs);
+}
+
+static bool probe_breakpoint_handler(struct pt_regs *regs)
+{
+ bool user = user_mode(regs);
+
+ return user ? uprobe_breakpoint_handler(regs) : kprobe_breakpoint_handler(regs);
+}
+
void handle_break(struct pt_regs *regs)
{
-#ifdef CONFIG_KPROBES
- if (kprobe_single_step_handler(regs))
+ if (probe_single_step_handler(regs))
return;
- if (kprobe_breakpoint_handler(regs))
- return;
-#endif
-#ifdef CONFIG_UPROBES
- if (uprobe_single_step_handler(regs))
+ if (probe_breakpoint_handler(regs))
return;
- if (uprobe_breakpoint_handler(regs))
- return;
-#endif
current->thread.bad_cause = regs->cause;
if (user_mode(regs))
base-commit: 7d2f353b2682dcfe5f9bc71e5b61d5b61770d98e
--
2.39.2
next reply other threads:[~2023-08-27 11:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-27 11:40 Björn Töpel [this message]
2023-08-27 11:44 ` [PATCH v2] riscv: Only consider swbp/ss handlers for correct privileged mode Conor Dooley
2023-08-27 17:57 ` Björn Töpel
2023-08-27 20:35 ` Nam Cao
2023-08-28 15:35 ` Puranjay Mohan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230827114003.224958-1-bjorn@kernel.org \
--to=bjorn@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=bjorn@rivosinc.com \
--cc=guoren@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=lkp@intel.com \
--cc=namcaov@gmail.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).