From: Steven Rostedt <rostedt@goodmis.org>
To: Linyu Yuan <quic_linyyuan@quicinc.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>, Bin Liu <b-liu@ti.com>,
Peter Chen <peter.chen@kernel.org>,
Pawel Laszczak <pawell@cadence.com>,
Roger Quadros <rogerq@kernel.org>,
Alan Stern <stern@rowland.harvard.edu>,
Masami Hiramatsu <mhiramat@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
<linux-usb@vger.kernel.org>, <linux-trace-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/8] usb: udc: trace: reduce buffer usage of trace event
Date: Thu, 14 Sep 2023 12:54:10 -0400 [thread overview]
Message-ID: <20230914125410.432ca343@gandalf.local.home> (raw)
In-Reply-To: <20230914100302.30274-4-quic_linyyuan@quicinc.com>
On Thu, 14 Sep 2023 18:02:57 +0800
Linyu Yuan <quic_linyyuan@quicinc.com> wrote:
> Save u32 members into trace event ring buffer and parse it for possible
> bit fields.
>
> Use new DECLARE_EVENT_CLASS_PRINT_INIT() class macro for output stage.
>
> Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
> ---
> drivers/usb/gadget/udc/trace.h | 154 +++++++++++++++------------------
> 1 file changed, 69 insertions(+), 85 deletions(-)
>
> diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h
> index a5ed26fbc2da..e1754667f1d2 100644
> --- a/drivers/usb/gadget/udc/trace.h
> +++ b/drivers/usb/gadget/udc/trace.h
> @@ -17,7 +17,7 @@
> #include <asm/byteorder.h>
> #include <linux/usb/gadget.h>
>
> -DECLARE_EVENT_CLASS(udc_log_gadget,
> +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_gadget,
> TP_PROTO(struct usb_gadget *g, int ret),
> TP_ARGS(g, ret),
> TP_STRUCT__entry(
> @@ -25,20 +25,7 @@ DECLARE_EVENT_CLASS(udc_log_gadget,
> __field(enum usb_device_speed, max_speed)
> __field(enum usb_device_state, state)
> __field(unsigned, mA)
> - __field(unsigned, sg_supported)
> - __field(unsigned, is_otg)
> - __field(unsigned, is_a_peripheral)
> - __field(unsigned, b_hnp_enable)
> - __field(unsigned, a_hnp_support)
> - __field(unsigned, hnp_polling_support)
> - __field(unsigned, host_request_flag)
> - __field(unsigned, quirk_ep_out_aligned_size)
> - __field(unsigned, quirk_altset_not_supp)
> - __field(unsigned, quirk_stall_not_supp)
> - __field(unsigned, quirk_zlp_not_supp)
> - __field(unsigned, is_selfpowered)
> - __field(unsigned, deactivated)
> - __field(unsigned, connected)
> + __field(u32, gdw1)
> __field(int, ret)
> ),
> TP_fast_assign(
> @@ -46,39 +33,35 @@ DECLARE_EVENT_CLASS(udc_log_gadget,
> __entry->max_speed = g->max_speed;
> __entry->state = g->state;
> __entry->mA = g->mA;
> - __entry->sg_supported = g->sg_supported;
> - __entry->is_otg = g->is_otg;
> - __entry->is_a_peripheral = g->is_a_peripheral;
> - __entry->b_hnp_enable = g->b_hnp_enable;
> - __entry->a_hnp_support = g->a_hnp_support;
> - __entry->hnp_polling_support = g->hnp_polling_support;
> - __entry->host_request_flag = g->host_request_flag;
> - __entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size;
> - __entry->quirk_altset_not_supp = g->quirk_altset_not_supp;
> - __entry->quirk_stall_not_supp = g->quirk_stall_not_supp;
> - __entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp;
> - __entry->is_selfpowered = g->is_selfpowered;
> - __entry->deactivated = g->deactivated;
> - __entry->connected = g->connected;
> + __entry->gdw1 = g->dw1;
> __entry->ret = ret;
> ),
> - TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d",
> + TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d",
> __entry->speed, __entry->max_speed, __entry->state, __entry->mA,
> - __entry->sg_supported ? "sg:" : "",
> - __entry->is_otg ? "OTG:" : "",
> - __entry->is_a_peripheral ? "a_peripheral:" : "",
> - __entry->b_hnp_enable ? "b_hnp:" : "",
> - __entry->a_hnp_support ? "a_hnp:" : "",
> - __entry->hnp_polling_support ? "hnp_poll:" : "",
> - __entry->host_request_flag ? "hostreq:" : "",
> - __entry->quirk_ep_out_aligned_size ? "out_aligned:" : "",
> - __entry->quirk_altset_not_supp ? "no_altset:" : "",
> - __entry->quirk_stall_not_supp ? "no_stall:" : "",
> - __entry->quirk_zlp_not_supp ? "no_zlp" : "",
> - __entry->is_selfpowered ? "self-powered:" : "bus-powered:",
> - __entry->deactivated ? "deactivated:" : "activated:",
> - __entry->connected ? "connected" : "disconnected",
> - __entry->ret)
> + tg.sg_supported ? "sg:" : "",
> + tg.is_otg ? "OTG:" : "",
> + tg.is_a_peripheral ? "a_peripheral:" : "",
> + tg.b_hnp_enable ? "b_hnp:" : "",
> + tg.a_hnp_support ? "a_hnp:" : "",
> + tg.a_alt_hnp_support ? "a_alt_hnp:" : "",
> + tg.hnp_polling_support ? "hnp_poll:" : "",
> + tg.host_request_flag ? "hostreq:" : "",
> + tg.quirk_ep_out_aligned_size ? "out_aligned:" : "",
> + tg.quirk_altset_not_supp ? "no_altset:" : "",
> + tg.quirk_stall_not_supp ? "no_stall:" : "",
> + tg.quirk_zlp_not_supp ? "no_zlp" : "",
> + tg.quirk_avoids_skb_reserve ? "no_skb_reserve" : "",
> + tg.is_selfpowered ? "self-powered:" : "bus-powered:",
> + tg.deactivated ? "deactivated:" : "activated:",
> + tg.connected ? "connected" : "disconnected",
> + tg.lpm_capable ? "lpm-capable" : "",
> + tg.wakeup_capable ? "wakeup-capable" : "",
> + tg.wakeup_armed ? "wakeup-armed" : "",
You can accomplish the above using __print_flags(), if you make it into a
bitmask, and that make a macro for each bit.
> + __entry->ret),
> + TP_printk_init(
> + struct usb_gadget tg;
> + tg.dw1 = __entry->gdw1;
> + )
> );
>
> DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number,
> @@ -141,38 +124,36 @@ DEFINE_EVENT(udc_log_gadget, usb_gadget_activate,
> TP_ARGS(g, ret)
> );
>
> -DECLARE_EVENT_CLASS(udc_log_ep,
> +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_ep,
> TP_PROTO(struct usb_ep *ep, int ret),
> TP_ARGS(ep, ret),
> TP_STRUCT__entry(
> - __string(name, ep->name)
> - __field(unsigned, maxpacket)
> - __field(unsigned, maxpacket_limit)
> - __field(unsigned, max_streams)
> - __field(unsigned, mult)
> - __field(unsigned, maxburst)
> - __field(u8, address)
> - __field(bool, claimed)
> - __field(bool, enabled)
> + __field(u32, edw3)
> + __field(u32, edw1)
> + __field(u32, edw2)
> __field(int, ret)
> ),
> TP_fast_assign(
> - __assign_str(name, ep->name);
> - __entry->maxpacket = ep->maxpacket;
> - __entry->maxpacket_limit = ep->maxpacket_limit;
> - __entry->max_streams = ep->max_streams;
> - __entry->mult = ep->mult;
> - __entry->maxburst = ep->maxburst;
> - __entry->address = ep->address,
> - __entry->claimed = ep->claimed;
> - __entry->enabled = ep->enabled;
> + __entry->edw3 = ep->dw3;
> + __entry->edw1 = ep->dw1;
> + __entry->edw2 = ep->dw2;
> __entry->ret = ret;
> ),
> TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d",
> - __get_str(name), __entry->maxpacket, __entry->maxpacket_limit,
> - __entry->max_streams, __entry->mult, __entry->maxburst,
> - __entry->address, __entry->claimed ? "claimed:" : "released:",
> - __entry->enabled ? "enabled" : "disabled", ret)
> + __s, te.maxpacket, te.maxpacket_limit,
> + te.max_streams, te.mult, te.maxburst,
> + te.address, te.claimed ? "claimed:" : "released:",
> + te.enabled ? "enabled" : "disabled", ret),
> + TP_printk_init(
> + struct usb_ep te;
> + char __s[9];
> + te.dw1 = __entry->edw1;
> + te.dw2 = __entry->edw2;
> + te.dw3 = __entry->edw3;
> + snprintf(__s, 9, "ep%d%s", te.address, \
> + (te.caps.dir_in && te.caps.dir_out) ? "" : \
> + te.caps.dir_in ? "in" : "out");
Note, there's a temp buffer trace_seq 'p' available for use as well. See
both include/trace/events/libata.h and include/trace/events/scsi.h:
const char *libata_trace_parse_status(struct trace_seq*, unsigned char);
#define __parse_status(s) libata_trace_parse_status(p, s)
I think that can be used instead of adding this TP_printk_init().
-- Steve
> + )
> );
>
> DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit,
> @@ -215,44 +196,47 @@ DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush,
> TP_ARGS(ep, ret)
> );
>
> -DECLARE_EVENT_CLASS(udc_log_req,
> +DECLARE_EVENT_CLASS_PRINT_INIT(udc_log_req,
> TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
> TP_ARGS(ep, req, ret),
> TP_STRUCT__entry(
> - __string(name, ep->name)
> + __field(u32, edw3)
> __field(unsigned, length)
> __field(unsigned, actual)
> __field(unsigned, num_sgs)
> __field(unsigned, num_mapped_sgs)
> - __field(unsigned, stream_id)
> - __field(unsigned, no_interrupt)
> - __field(unsigned, zero)
> - __field(unsigned, short_not_ok)
> + __field(u32, rdw1)
> __field(int, status)
> __field(int, ret)
> __field(struct usb_request *, req)
> ),
> TP_fast_assign(
> - __assign_str(name, ep->name);
> + __entry->edw3 = ep->dw3;
> __entry->length = req->length;
> __entry->actual = req->actual;
> __entry->num_sgs = req->num_sgs;
> __entry->num_mapped_sgs = req->num_mapped_sgs;
> - __entry->stream_id = req->stream_id;
> - __entry->no_interrupt = req->no_interrupt;
> - __entry->zero = req->zero;
> - __entry->short_not_ok = req->short_not_ok;
> + __entry->rdw1 = req->dw1;
> __entry->status = req->status;
> __entry->ret = ret;
> __entry->req = req;
> ),
> TP_printk("%s: req %p length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d",
> - __get_str(name),__entry->req, __entry->actual, __entry->length,
> - __entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id,
> - __entry->zero ? "Z" : "z",
> - __entry->short_not_ok ? "S" : "s",
> - __entry->no_interrupt ? "i" : "I",
> - __entry->status, __entry->ret
> + __s,__entry->req, __entry->actual, __entry->length,
> + __entry->num_mapped_sgs, __entry->num_sgs, tr.stream_id,
> + tr.zero ? "Z" : "z",
> + tr.short_not_ok ? "S" : "s",
> + tr.no_interrupt ? "i" : "I",
> + __entry->status, __entry->ret),
> + TP_printk_init(
> + struct usb_ep te;
> + struct usb_request tr;
> + char __s[9];
> + te.dw3 = __entry->edw3;
> + tr.dw1 = __entry->rdw1;
> + snprintf(__s, 9, "ep%d%s", te.address, \
> + (te.caps.dir_in && te.caps.dir_out) ? "" : \
> + te.caps.dir_in ? "in" : "out");
> )
> );
>
next prev parent reply other threads:[~2023-09-14 16:53 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-14 10:02 [PATCH 0/8] usb: gadget: reduce usb gadget trace event buffer usage Linyu Yuan
2023-09-14 10:02 ` [PATCH 1/8] trace: add new DECLARE_EVENT_CLASS_PRINT_INIT class type Linyu Yuan
2023-09-14 14:29 ` kernel test robot
2023-09-14 10:02 ` [PATCH 2/8] usb: gadget: add anonymous definition in some struct for trace purpose Linyu Yuan
2023-09-14 14:54 ` Alan Stern
2023-09-15 1:02 ` Linyu Yuan
2023-09-15 1:51 ` Alan Stern
2023-09-15 1:56 ` Linyu Yuan
2023-09-14 10:02 ` [PATCH 3/8] usb: udc: trace: reduce buffer usage of trace event Linyu Yuan
2023-09-14 16:54 ` Steven Rostedt [this message]
2023-09-15 1:11 ` Linyu Yuan
2023-09-15 2:16 ` Steven Rostedt
2023-09-15 2:25 ` Linyu Yuan
2023-09-14 10:02 ` [PATCH 4/8] usb: cdns3: " Linyu Yuan
2023-09-14 10:02 ` [PATCH 5/8] usb: dwc3: " Linyu Yuan
2023-09-14 10:03 ` [PATCH 6/8] usb: cdns2: " Linyu Yuan
2023-09-14 10:03 ` [PATCH 7/8] usb: mtu3: " Linyu Yuan
2023-09-14 10:03 ` [PATCH 8/8] usb: musb: " Linyu Yuan
2023-09-14 16:42 ` [PATCH 0/8] usb: gadget: reduce usb gadget trace event buffer usage Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230914125410.432ca343@gandalf.local.home \
--to=rostedt@goodmis.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=b-liu@ti.com \
--cc=chunfeng.yun@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=pawell@cadence.com \
--cc=peter.chen@kernel.org \
--cc=quic_linyyuan@quicinc.com \
--cc=rogerq@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).