From: Masami Hiramatsu (Google) <mhiramat@kernel.org>
To: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org, linux-trace-kernel@vger.kernel.org,
Masami Hiramatsu <mhiramat@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Subject: Re: [PATCH 1/2] ring-buffer: Replace rb_time_cmpxchg() with rb_time_cmp_and_update()
Date: Mon, 18 Dec 2023 23:24:55 +0900 [thread overview]
Message-ID: <20231218232455.03aa6506f855109476e34212@kernel.org> (raw)
In-Reply-To: <20231215165628.096822746@goodmis.org>
On Fri, 15 Dec 2023 11:55:13 -0500
Steven Rostedt <rostedt@goodmis.org> wrote:
> From: "Steven Rostedt (Google)" <rostedt@goodmis.org>
>
> There's only one place that performs a 64-bit cmpxchg for the timestamp
> processing. The cmpxchg is only to set the write_stamp equal to the
> before_stamp, and if it doesn't get set, then the next event will simply
> be forced to add an absolute timestamp.
>
> Given that 64-bit cmpxchg is expensive on 32-bit, and the current
> workaround uses 3 consecutive 32-bit cmpxchg doesn't make it any faster.
> It's best to just not do the cmpxchg as a simple compare works for the
> accuracy of the timestamp. The only thing that will happen without the
> cmpxchg is the prepended absolute timestamp on the next event which is not
> that big of a deal as the path where this happens is seldom hit because it
> requires an interrupt to happen between a few lines of code that also
> writes an event into the same buffer.
>
> With this change, the 32-bit rb_time_t workaround can be removed.
>
Hmm, but this patch itself is just moving rb_time_cmpxchg() in the new
rb_time_cmp_and_update() function. The actual change has been done
in the next patch. I think there is no reason to split this from the
second one...
Isn't this part actual change?
> static bool rb_time_cmp_and_update(rb_time_t *t, u64 expect, u64 set)
> {
> - return rb_time_cmpxchg(t, expect, set);
> +#ifdef RB_TIME_32
> + return expect == READ_ONCE(t->time);
> +#else
> + return local64_try_cmpxchg(&t->time, &expect, set);
> +#endif
> }
Thank you,
> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
> ---
> kernel/trace/ring_buffer.c | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
> index 1a26b3a1901f..c6842a4331a9 100644
> --- a/kernel/trace/ring_buffer.c
> +++ b/kernel/trace/ring_buffer.c
> @@ -762,6 +762,15 @@ static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
> }
> #endif
>
> +/*
> + * Returns true if t == expect, and if possible will update with set,
> + * but t is not guaranteed to be updated even if this returns true
> + */
> +static bool rb_time_cmp_and_update(rb_time_t *t, u64 expect, u64 set)
> +{
> + return rb_time_cmpxchg(t, expect, set);
> +}
> +
> /*
> * Enable this to make sure that the event passed to
> * ring_buffer_event_time_stamp() is not committed and also
> @@ -3622,9 +3631,17 @@ __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
> barrier();
> /*E*/ if (write == (local_read(&tail_page->write) & RB_WRITE_MASK) &&
> info->after < ts &&
> - rb_time_cmpxchg(&cpu_buffer->write_stamp,
> - info->after, ts)) {
> - /* Nothing came after this event between C and E */
> + rb_time_cmp_and_update(&cpu_buffer->write_stamp,
> + info->after, ts)) {
> + /*
> + * Nothing came after this event between C and E it is
> + * safe to use info->after for the delta.
> + * The above rb_time_cmp_and_update() may or may not
> + * have updated the write_stamp. If it did not then
> + * the next event will simply add an absolute timestamp
> + * as the write_stamp will be different than the
> + * before_stamp.
> + */
> info->delta = ts - info->after;
> } else {
> /*
> --
> 2.42.0
>
>
--
Masami Hiramatsu (Google) <mhiramat@kernel.org>
next prev parent reply other threads:[~2023-12-18 14:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-15 16:55 [PATCH 0/2] tracing: Replace final 64-bit cmpxchg with compare and update if available Steven Rostedt
2023-12-15 16:55 ` [PATCH 1/2] ring-buffer: Replace rb_time_cmpxchg() with rb_time_cmp_and_update() Steven Rostedt
2023-12-18 14:24 ` Masami Hiramatsu [this message]
2023-12-18 15:15 ` Steven Rostedt
2023-12-18 18:42 ` Steven Rostedt
2023-12-18 22:52 ` Steven Rostedt
2023-12-15 16:55 ` [PATCH 2/2] ring-buffer: Remove 32bit timestamp logic Steven Rostedt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231218232455.03aa6506f855109476e34212@kernel.org \
--to=mhiramat@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.desnoyers@efficios.com \
--cc=rostedt@goodmis.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox