From: Jiri Olsa <jolsa@kernel.org>
To: Oleg Nesterov <oleg@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-trace-kernel@vger.kernel.org, x86@kernel.org,
"Song Liu" <songliubraving@fb.com>, "Yonghong Song" <yhs@fb.com>,
"John Fastabend" <john.fastabend@gmail.com>,
"Hao Luo" <haoluo@google.com>,
"Steven Rostedt" <rostedt@goodmis.org>,
"Masami Hiramatsu" <mhiramat@kernel.org>,
"Alan Maguire" <alan.maguire@oracle.com>,
"David Laight" <David.Laight@ACULAB.COM>,
"Thomas Weißschuh" <thomas@t-8ch.de>
Subject: [PATCH RFCv3 03/23] uprobes: Move ref_ctr_offset update out of uprobe_write_opcode
Date: Thu, 20 Mar 2025 12:41:38 +0100 [thread overview]
Message-ID: <20250320114200.14377-4-jolsa@kernel.org> (raw)
In-Reply-To: <20250320114200.14377-1-jolsa@kernel.org>
The uprobe_write_opcode function currently updates also refctr offset
if there's one defined for uprobe.
This is not handy for following changes which needs to make several
updates (writes) to install or remove uprobe, but update refctr offset
just once.
Adding set_swbp_refctr/set_orig_refctr which makes sure refctr offset
is updated.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
---
kernel/events/uprobes.c | 50 ++++++++++++++++++++++++++---------------
1 file changed, 32 insertions(+), 18 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 5c9fc31c50f1..77b85b19f4c2 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -473,15 +473,13 @@ static int update_ref_ctr(struct uprobe *uprobe, struct mm_struct *mm,
int uprobe_write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
unsigned long vaddr, uprobe_opcode_t opcode)
{
- struct uprobe *uprobe;
struct page *old_page, *new_page;
struct vm_area_struct *vma;
- int ret, is_register, ref_ctr_updated = 0;
+ int ret, is_register;
bool orig_page_huge = false;
unsigned int gup_flags = FOLL_FORCE;
is_register = is_swbp_insn(&opcode);
- uprobe = container_of(auprobe, struct uprobe, arch);
retry:
if (is_register)
@@ -506,15 +504,6 @@ int uprobe_write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
goto put_old;
}
- /* We are going to replace instruction, update ref_ctr. */
- if (!ref_ctr_updated && uprobe->ref_ctr_offset) {
- ret = update_ref_ctr(uprobe, mm, is_register ? 1 : -1);
- if (ret)
- goto put_old;
-
- ref_ctr_updated = 1;
- }
-
ret = 0;
if (!is_register && !PageAnon(old_page))
goto put_old;
@@ -565,10 +554,6 @@ int uprobe_write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
if (unlikely(ret == -EAGAIN))
goto retry;
- /* Revert back reference counter if instruction update failed. */
- if (ret && is_register && ref_ctr_updated)
- update_ref_ctr(uprobe, mm, -1);
-
/* try collapse pmd for compound page */
if (!ret && orig_page_huge)
collapse_pte_mapped_thp(mm, vaddr, false);
@@ -590,6 +575,25 @@ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned
return uprobe_write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
}
+static int set_swbp_refctr(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
+{
+ int err;
+
+ /* We are going to replace instruction, update ref_ctr. */
+ if (uprobe->ref_ctr_offset) {
+ err = update_ref_ctr(uprobe, mm, 1);
+ if (err)
+ return err;
+ }
+
+ err = set_swbp(&uprobe->arch, mm, vaddr);
+
+ /* Revert back reference counter if instruction update failed. */
+ if (err && uprobe->ref_ctr_offset)
+ update_ref_ctr(uprobe, mm, -1);
+ return err;
+}
+
/**
* set_orig_insn - Restore the original instruction.
* @mm: the probed process address space.
@@ -606,6 +610,16 @@ set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long v
*(uprobe_opcode_t *)&auprobe->insn);
}
+static int set_orig_refctr(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
+{
+ int err = set_orig_insn(&uprobe->arch, mm, vaddr);
+
+ /* Revert back reference counter even if instruction update failed. */
+ if (uprobe->ref_ctr_offset)
+ update_ref_ctr(uprobe, mm, -1);
+ return err;
+}
+
/* uprobe should have guaranteed positive refcount */
static struct uprobe *get_uprobe(struct uprobe *uprobe)
{
@@ -1142,7 +1156,7 @@ install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
if (first_uprobe)
set_bit(MMF_HAS_UPROBES, &mm->flags);
- ret = set_swbp(&uprobe->arch, mm, vaddr);
+ ret = set_swbp_refctr(uprobe, mm, vaddr);
if (!ret)
clear_bit(MMF_RECALC_UPROBES, &mm->flags);
else if (first_uprobe)
@@ -1155,7 +1169,7 @@ static int
remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
{
set_bit(MMF_RECALC_UPROBES, &mm->flags);
- return set_orig_insn(&uprobe->arch, mm, vaddr);
+ return set_orig_refctr(uprobe, mm, vaddr);
}
struct map_info {
--
2.49.0
next prev parent reply other threads:[~2025-03-20 11:42 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-20 11:41 [PATCH RFCv3 00/23] uprobes: Add support to optimize usdt probes on x86_64 Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 01/23] uprobes: Rename arch_uretprobe_trampoline function Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 02/23] uprobes: Make copy_from_page global Jiri Olsa
2025-03-20 11:41 ` Jiri Olsa [this message]
2025-03-20 11:41 ` [PATCH RFCv3 04/23] uprobes: Add uprobe_write function Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 05/23] uprobes: Add nbytes argument to uprobe_write_opcode Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 06/23] uprobes: Add orig argument to uprobe_write and uprobe_write_opcode Jiri Olsa
2025-04-04 20:33 ` Andrii Nakryiko
2025-04-07 11:13 ` Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 07/23] uprobes: Remove breakpoint in unapply_uprobe under mmap_write_lock Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 08/23] uprobes/x86: Add uprobe syscall to speed up uprobe Jiri Olsa
2025-04-04 20:33 ` Andrii Nakryiko
2025-04-07 10:58 ` Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 09/23] uprobes/x86: Add mapping for optimized uprobe trampolines Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 10/23] uprobes/x86: Add support to emulate nop5 instruction Jiri Olsa
2025-04-04 20:33 ` Andrii Nakryiko
2025-04-07 11:07 ` Jiri Olsa
2025-04-08 20:21 ` Jiri Olsa
2025-04-09 18:19 ` Andrii Nakryiko
2025-04-11 12:18 ` Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 11/23] uprobes/x86: Add support to optimize uprobes Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 12/23] selftests/bpf: Use 5-byte nop for x86 usdt probes Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 13/23] selftests/bpf: Reorg the uprobe_syscall test function Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 14/23] selftests/bpf: Rename uprobe_syscall_executed prog to test_uretprobe_multi Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 15/23] selftests/bpf: Add uprobe/usdt syscall tests Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 16/23] selftests/bpf: Add hit/attach/detach race optimized uprobe test Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 17/23] selftests/bpf: Add uprobe syscall sigill signal test Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 18/23] selftests/bpf: Add optimized usdt variant for basic usdt test Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 19/23] selftests/bpf: Add uprobe_regs_equal test Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 20/23] selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 21/23] selftests/bpf: Add 5-byte nop uprobe trigger bench Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 22/23] seccomp: passthrough uprobe systemcall without filtering Jiri Olsa
2025-03-20 11:41 ` [PATCH RFCv3 23/23] selftests/seccomp: validate uprobe syscall passes through seccomp Jiri Olsa
2025-03-20 12:23 ` [PATCH RFCv3 00/23] uprobes: Add support to optimize usdt probes on x86_64 Oleg Nesterov
2025-03-20 13:51 ` Jiri Olsa
2025-04-04 20:36 ` Andrii Nakryiko
2025-04-07 11:17 ` Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250320114200.14377-4-jolsa@kernel.org \
--to=jolsa@kernel.org \
--cc=David.Laight@ACULAB.COM \
--cc=alan.maguire@oracle.com \
--cc=andrii@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=haoluo@google.com \
--cc=john.fastabend@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=oleg@redhat.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=songliubraving@fb.com \
--cc=thomas@t-8ch.de \
--cc=x86@kernel.org \
--cc=yhs@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).