From: Lance Yang <lance.yang@linux.dev>
To: hughd@google.com, kirill@shutemov.name
Cc: akpm@linux-foundation.org, david@kernel.org, ljs@kernel.org,
nico.pache@linux.dev, baolin.wang@linux.alibaba.com,
baohua@kernel.org, dev.jain@arm.com, lance.yang@linux.dev,
liam@infradead.org, mhocko@suse.com, rppt@kernel.org,
ryan.roberts@arm.com, shuah@kernel.org, surenb@google.com,
usama.arif@linux.dev, vbabka@kernel.org, ziy@nvidia.com,
usama.anjum@arm.com, agordeev@linux.ibm.com, linux-mm@kvack.org,
linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org,
kas@kernel.org, jannh@google.com, willy@infradead.org,
pfalcato@suse.de, rostedt@goodmis.org, mhiramat@kernel.org,
linux-trace-kernel@vger.kernel.org, bpf@vger.kernel.org
Subject: Re: [RFC PATCH 19/57] mm/collapse: install a PMD leaf as the terminal layer
Date: Tue, 25 Aug 2026 20:23:54 +0800 [thread overview]
Message-ID: <20260825122354.98021-1-lance.yang@linux.dev> (raw)
In-Reply-To: <20260816224609.308019-20-kirill@shutemov.name>
@Hugh, who added pmdp_get_lockless_sync() for the PAE case in
146b42e07494.
On Sun, Aug 16, 2026 at 11:45:31PM +0100, Kiryl Shutsemau wrote:
>From: "Kiryl Shutsemau (Meta)" <kas@kernel.org>
>
>Fill in the PMD install. Under the pmd lock, with the pte ptl nested
>inside it: verify, detach the table with pmdp_collapse_flush(), deposit a
>fresh one and map the leaf.
>
>That is one atomic section, so no pmd_none() window ever exists: faults
>stay held down at pte level by the migration entries throughout. It is
>what lets PMD collapse run under mmap_read like everything else here.
>
>Two things force that nesting, which is the one the tree already uses to
>reinstall a table. A racing zap of a frozen entry takes the pte ptl, so
>the verify has to hold it. And the table must not come apart between
>verify and detach, which is the pmd lock's job.
>
>Nothing leaves the section early, aborts included. An abort only
>restores PTEs and would need no pmd-level exclusion of its own, except
>that its pte pointer came from pte_offset_map_rw_nolock(), whose caller
>must establish that the pmd is stable.
>
>The deposited table is the freshly allocated one, never the table just
>detached. A deposited table has to be quiescent, because whoever
>withdraws it frees it immediately with nothing to hold a lockless walker
>off first, and a table that has never been reachable is quiescent by
>construction.
>
>The detached one is not: GUP-fast and RCU pte walks that read the old PMD
>may still be inside it, and on broadcast-TLBI architectures the flush
>expels nobody. Quiescing it would need an IPI, which has nowhere to go
>here -- outside the pmd lock it opens the pmd_none() window this design
>does not have, inside it is a broadcast under a spinlock. So the
>detached table goes to pte_free_defer(), which holds the free until those
>walkers finish. One transient table page per PMD collapse is the cost.
Well, git history spells out why pmdp_get_lockless_sync() is needed here.
146b42e07494 added PAE safety because pmdp_get_lockless() can assemble a
pmd_low + pmd_high pair that never belonged to the same PMD value.
1d65b771bc08 then put pmdp_get_lockless_sync() right after
pmdp_collapse_flush() (with pmd lock + pte lock held), and 1043173eb5eb
used the same placement in collapse_pte_mapped_thp().
Current implementation spells out the reader-side rule as well:
#if CONFIG_PGTABLE_LEVELS > 2
static inline pmd_t pmdp_get_lockless(pmd_t *pmdp)
{
pmd_t pmd;
do {
pmd.pmd_low = pmdp->pmd_low;
smp_rmb();
pmd.pmd_high = pmdp->pmd_high;
smp_rmb();
} while (unlikely(pmd.pmd_low != pmdp->pmd_low));
return pmd;
}
#define pmdp_get_lockless pmdp_get_lockless
#define pmdp_get_lockless_sync() tlb_remove_table_sync_one()
#endif /* CONFIG_PGTABLE_LEVELS > 2 */
#if defined(CONFIG_GUP_GET_PXX_LOW_HIGH) && \
(defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RCU))
/*
* See the comment above ptep_get_lockless() in include/linux/pgtable.h:
* the barriers in pmdp_get_lockless() cannot guarantee that the value in
* pmd_high actually belongs with the value in pmd_low; but holding interrupts
* off blocks the TLB flush between present updates, which guarantees that a
* successful __pte_offset_map() points to a page from matched halves.
*/
static unsigned long pmdp_get_lockless_start(void)
{
unsigned long irqflags;
local_irq_save(irqflags);
return irqflags;
}
static void pmdp_get_lockless_end(unsigned long irqflags)
{
local_irq_restore(irqflags);
}
...
#endif
pte_t *__pte_offset_map(pmd_t *pmd, unsigned long addr, pmd_t *pmdvalp)
{
unsigned long irqflags;
pmd_t pmdval;
rcu_read_lock();
irqflags = pmdp_get_lockless_start();
pmdval = pmdp_get_lockless(pmd);
pmdp_get_lockless_end(irqflags);
if (pmdvalp)
*pmdvalp = pmdval;
if (unlikely(pmd_none(pmdval) || !pmd_present(pmdval)))
goto nomap;
if (unlikely(pmd_trans_huge(pmdval)))
goto nomap;
if (unlikely(pmd_bad(pmdval))) {
pmd_clear_bad(pmd);
goto nomap;
}
return __pte_map(&pmdval, addr);
nomap:
rcu_read_unlock();
return NULL;
}
Hmm, Patch #19 still has the present table PMD -> none -> present leaf
PMD transition. collapse_install_pmd() does pmdp_collapse_flush() and
installs the new PMD through map_anon_folio_pmd_nopf() without
pmdp_get_lockless_sync() in between. pte_free_defer() keeps the old table
alive for RCU readers, but it can't stop pmdp_get_lockless() in
__pte_offset_map() from assembling halves across that transition.
FWIW, pmdp_get_lockless_sync() is an empty inline when pmdp_get_lockless()
doesn't use the pmd_low/pmd_high reader. On x86,
CONFIG_GUP_GET_PXX_LOW_HIGH is selected only by X86_PAE, so other x86
configs wouldn't pay the IPI cost.
@Hugh, do I miss something?
Could we keep pmdp_get_lockless_sync() right after pmdp_collapse_flush(),
before map_anon_folio_pmd_nopf() (and while the locks are still held)?
Maybe:
---8<---
diff --git a/mm/collapse.c b/mm/collapse.c
index 7c10888031f7..cf4e57b598f9 100644
--- a/mm/collapse.c
+++ b/mm/collapse.c
@@ -1585,6 +1585,7 @@ static void collapse_install_pmd(struct vm_area_struct *vma,
* is why the helper shoots down a pte range rather than a pmd.
*/
old_pmd = pmdp_collapse_flush(vma, cand->addr, pmd);
+ pmdp_get_lockless_sync();
old_table = pmd_pgtable(old_pmd);
/*
@@ -1601,14 +1602,11 @@ static void collapse_install_pmd(struct vm_area_struct *vma,
* construction, which is why collapse_alloc() secured one.
*
* The detached table is not. GUP-fast and RCU pte walks that read the
- * old PMD before pmdp_collapse_flush() may still be inside it, and on
- * broadcast-TLBI arches that flush expels nobody. Quiescing it would
- * take an IPI (tlb_remove_table_sync_one()), which has nowhere to go
- * here: outside the pmd lock it opens a pmd_none window a fault can fill,
- * inside it is a broadcast under a spinlock. So it goes to
- * pte_free_defer(), which holds the free until those walkers finish, as
- * retract_page_tables() does. One transient table page per PMD collapse
- * is what that costs.
+ * old PMD before pmdp_collapse_flush() may still be inside it.
+ * pmdp_get_lockless_sync() keeps split-PMD readers from observing
+ * unmatched halves across the transition, while pte_free_defer() holds
+ * the free until RCU readers finish. One transient table page per PMD
+ * collapse is what that costs.
*/
pgtable_trans_huge_deposit(mm, pmd, cand->deposit);
map_anon_folio_pmd_nopf(cand->new_folio, pmd, vma, cand->addr);
---
Cheers, Lance
>No anon_vma_lock_write() is taken, unlike the mechanism being replaced:
>
> - rmap walks on the sources are unreachable, their refcounts frozen and
> their folio locks held from freeze to putback;
> - non-rmap pte walkers see migration entries;
> - pmd-level observers see either the old table or the leaf, never an
> intermediate;
> - fork, mremap and munmap take mmap_write, which the mmap_read held here
> excludes.
>
>Assisted-by: Claude-Code:claude-opus-5
>Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
>---
> mm/collapse.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
>diff --git a/mm/collapse.c b/mm/collapse.c
>index 842adc30aeb0..ab7476471b8d 100644
>--- a/mm/collapse.c
>+++ b/mm/collapse.c
>@@ -1232,6 +1232,124 @@ static bool collapse_verify_candidate(struct collapse_candidate *cand,
> static void collapse_install_pmd(struct vm_area_struct *vma,
> struct collapse_control *cc, pmd_t *pmd)
> {
>+ struct collapse_candidate *cand = &cc->candidates[0];
>+ struct mm_struct *mm = vma->vm_mm;
>+ spinlock_t *pmd_ptl, *pte_ptl;
>+ pgtable_t old_table = NULL;
>+ unsigned int nr_populated;
>+ pmd_t old_pmd, pmdval;
>+ pte_t *pte;
>+
>+ if (cand->state != CAND_FROZEN)
>+ return;
>+
>+ /* No destination: the provision pass could not spare one */
>+ if (!cand->new_folio) {
>+ pte = pte_offset_map_lock(mm, pmd, cand->addr, &pte_ptl);
>+ collapse_abort_candidate(vma, cand, pte);
>+ if (pte)
>+ pte_unmap_unlock(pte, pte_ptl);
>+ return;
>+ }
>+
>+ /*
>+ * The pte ptl nests inside the pmd lock, the nesting the tree already
>+ * uses for reinstalling a table: a racing zap of a frozen entry takes
>+ * the pte ptl, so the verify must hold it, and the table must not come
>+ * apart between verify and detach. pmd_same() rechecks are unnecessary,
>+ * the pmd lock being held across the whole section.
>+ */
>+ pmd_ptl = pmd_lock(mm, pmd);
>+ pte = pte_offset_map_rw_nolock(mm, pmd, cand->addr, &pmdval, &pte_ptl);
>+ if (!pte) {
>+ /* Table gone under us; see collapse_abort_candidate() on @pte */
>+ spin_unlock(pmd_ptl);
>+ cand->result = SCAN_NO_PTE_TABLE;
>+ collapse_abort_candidate(vma, cand, NULL);
>+ return;
>+ }
>+ if (pte_ptl != pmd_ptl)
>+ spin_lock_nested(pte_ptl, SINGLE_DEPTH_NESTING);
>+
>+ /*
>+ * Every exit is inside that section, the aborts as much as the install.
>+ * An abort needs no pmd-level exclusion of its own; it only restores
>+ * PTEs. But the table it works on came from pte_offset_map_rw_nolock(),
>+ * which leaves its caller to establish that the pmd is stable, and the
>+ * held pmd lock is what does that here.
>+ */
>+ if (cand->result != SCAN_SUCCEED) {
>+ /* Machine check during the copy */
>+ collapse_abort_candidate(vma, cand, pte);
>+ goto out_unlock;
>+ }
>+
>+ if (!collapse_verify_candidate(cand, pte, &nr_populated)) {
>+ cand->result = SCAN_PTE_NON_PRESENT;
>+ collapse_abort_candidate(vma, cand, pte);
>+ goto out_unlock;
>+ }
>+
>+ /*
>+ * Nothing fallible sits past here. No anon_vma_lock_write either: rmap
>+ * walks on the sources are unreachable -- refcounts frozen, folio locks
>+ * held from freeze to putback -- non-rmap pte walkers see migration
>+ * entries, pmd-level observers see the old table or the leaf and never an
>+ * intermediate, and fork, mremap and munmap take mmap_write, which our
>+ * mmap_read excludes.
>+ *
>+ * The flush inside pmdp_collapse_flush() is the round's second over this
>+ * range: the freeze displaced every leaf here and flushed before dropping
>+ * the ptl, and the verify above proved nothing has been mapped since.
>+ * What it covers is the paging-structure caches -- a CPU may still hold
>+ * the pmd-to-table link, for a table that is about to be freed -- which
>+ * is why the helper shoots down a pte range rather than a pmd.
>+ */
>+ old_pmd = pmdp_collapse_flush(vma, cand->addr, pmd);
>+ old_table = pmd_pgtable(old_pmd);
>+
>+ /*
>+ * The smp_wmb() in __folio_mark_uptodate() orders the copied data before
>+ * the install below publishes it.
>+ */
>+ __folio_mark_uptodate(cand->new_folio);
>+
>+ /*
>+ * Deposit a freshly allocated table, not the one just detached: a
>+ * deposited table has to be quiescent, because whoever withdraws it frees
>+ * it immediately (zap_huge_pmd()) with nothing to hold a lockless walker
>+ * off first. A table that has never been reachable is quiescent by
>+ * construction, which is why collapse_alloc() secured one.
>+ *
>+ * The detached table is not. GUP-fast and RCU pte walks that read the
>+ * old PMD before pmdp_collapse_flush() may still be inside it, and on
>+ * broadcast-TLBI arches that flush expels nobody. Quiescing it would
>+ * take an IPI (tlb_remove_table_sync_one()), which has nowhere to go
>+ * here: outside the pmd lock it opens a pmd_none window a fault can fill,
>+ * inside it is a broadcast under a spinlock. So it goes to
>+ * pte_free_defer(), which holds the free until those walkers finish, as
>+ * retract_page_tables() does. One transient table page per PMD collapse
>+ * is what that costs.
>+ */
>+ pgtable_trans_huge_deposit(mm, pmd, cand->deposit);
>+ map_anon_folio_pmd_nopf(cand->new_folio, pmd, vma, cand->addr);
>+
>+ /* Slots with no source gain anon memory that no zap accounted */
>+ if (nr_populated)
>+ add_mm_counter(mm, MM_ANONPAGES, nr_populated);
>+ cand->deposit = NULL;
>+ cand->new_folio = NULL; /* ownership: the mapping */
>+ cand->state = CAND_INSTALLED;
>+
>+out_unlock:
>+ if (pte_ptl != pmd_ptl)
>+ spin_unlock(pte_ptl);
>+ pte_unmap(pte);
>+ spin_unlock(pmd_ptl);
>+
>+ /* The deposit balanced the detached table, so the count is already right */
>+ if (old_table)
>+ pte_free_defer(mm, old_table);
> }
>
> /* Publish each destination folio in place of the sources it replaces */
>--
>2.54.0
>
>
next prev parent reply other threads:[~2026-08-25 12:24 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-16 22:45 [RFC PATCH 00/57] mm/collapse: rebuild collapse on migration primitives Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 01/57] mm: add pte_folio() Kiryl Shutsemau
2026-08-18 16:38 ` Rik van Riel
2026-08-18 18:13 ` David Hildenbrand (Arm)
2026-08-18 20:04 ` Rik van Riel
2026-08-19 7:57 ` David Hildenbrand (Arm)
2026-08-18 17:09 ` David Hildenbrand (Arm)
2026-08-18 18:30 ` Lorenzo Stoakes (ARM)
2026-08-20 10:52 ` Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 02/57] mm: add pte_none_or_zero() Kiryl Shutsemau
2026-08-17 17:57 ` David Hildenbrand (Arm)
2026-08-20 11:03 ` Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 03/57] mm/collapse: add collapse.h for the shared collapse state Kiryl Shutsemau
2026-08-18 10:50 ` Lorenzo Stoakes (ARM)
2026-08-20 11:06 ` Kiryl Shutsemau
2026-08-19 14:19 ` David Hildenbrand (Arm)
2026-08-20 11:11 ` Kiryl Shutsemau
2026-08-24 11:47 ` David Hildenbrand (Arm)
2026-08-24 12:10 ` Kiryl Shutsemau
2026-08-24 12:28 ` David Hildenbrand (Arm)
2026-08-24 12:36 ` Kiryl Shutsemau
2026-08-24 14:09 ` Lorenzo Stoakes (ARM)
2026-08-24 15:18 ` Kiryl Shutsemau
2026-08-24 15:23 ` Lorenzo Stoakes (ARM)
2026-08-24 15:51 ` Lorenzo Stoakes (ARM)
2026-08-16 22:45 ` [RFC PATCH 04/57] mm/collapse: rename mthp_present_ptes to eligible_ptes Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 05/57] mm/collapse: state what a collapse may do in the policy Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 06/57] mm/collapse: move the smallest collapse order to collapse.h Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 07/57] mm/collapse: sketch the new anonymous collapse engine Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 08/57] mm/collapse: scan a table for what a collapse could use Kiryl Shutsemau
2026-08-24 8:39 ` Lance Yang
2026-08-24 9:36 ` Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 09/57] mm/collapse: collect candidate windows into a round Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 10/57] mm/collapse: run a round and feed the outcomes back Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 11/57] mm/collapse: sketch the passes of a round Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 12/57] mm/collapse: allocate a destination per candidate Kiryl Shutsemau
2026-08-24 11:20 ` Lance Yang
2026-08-24 12:37 ` Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 13/57] mm/collapse: revalidate a round against the VMA Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 14/57] mm/collapse: fault the sources in before the freeze Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 15/57] mm/collapse: check what a candidate would freeze Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 16/57] mm/collapse: freeze the sources behind migration entries Kiryl Shutsemau
2026-08-24 13:12 ` Lance Yang
2026-08-24 14:13 ` Kiryl Shutsemau
2026-08-24 15:49 ` Johannes Weiner
2026-08-24 16:13 ` Usama Arif
2026-08-25 2:44 ` Lance Yang
2026-08-16 22:45 ` [RFC PATCH 17/57] mm/collapse: copy the sources into the destinations Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 18/57] mm/collapse: install the destinations at PTE level Kiryl Shutsemau
2026-08-25 6:48 ` Lance Yang
2026-08-16 22:45 ` [RFC PATCH 19/57] mm/collapse: install a PMD leaf as the terminal layer Kiryl Shutsemau
2026-08-25 12:23 ` Lance Yang [this message]
2026-08-16 22:45 ` [RFC PATCH 20/57] mm/collapse: put the sources back Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 21/57] mm/collapse: settle whatever the round reached Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 22/57] mm/collapse: walk a table with a selection cursor Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 23/57] mm/collapse: give a refused region a second chance Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 24/57] mm/collapse: report each candidate's outcome to tracing Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 25/57] mm/collapse: collapse anonymous memory with the new engine Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 26/57] mm/collapse: give collapse_single_pmd() the range to work on Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 27/57] mm/collapse: scan the windows a VMA can hold Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 28/57] mm/collapse: remove the mechanism the engine replaces Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 29/57] mm/collapse: move what a collapse is judged on into collapse.c Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 30/57] mm/collapse: name the max_ptes ceiling after collapse Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 31/57] mm/khugepaged: count collapses where khugepaged makes them Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 32/57] mm/collapse: move the file collapse into collapse.c Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 33/57] mm/collapse: split collapse into a scan and a run Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 34/57] mm/collapse: implement MADV_COLLAPSE in madvise.c Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 35/57] mm/madvise: drop MADV_COLLAPSE's redundant mm reference Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 36/57] mm/collapse: report what the scan found Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 37/57] mm/collapse: report what the fault-in pass paid Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 38/57] mm/collapse: report the round, and what it made faulters wait Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 39/57] mm/collapse: name the file collapse's tracepoints after collapse Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 40/57] mm/collapse: remove the tracepoints of the mechanism that is gone Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 41/57] mm/collapse: give collapse its own trace header Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 42/57] mm/collapse: allow error injection into the freeze Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 43/57] mm/khugepaged: check the scan budget before the work, not after Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 44/57] mm/khugepaged: hold the address space open across a scan Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 45/57] mm/collapse: take a per-VMA read lock for the round Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 46/57] mm/khugepaged: scan under a per-VMA read lock Kiryl Shutsemau
2026-08-16 22:45 ` [RFC PATCH 47/57] mm/madvise: collapse " Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 48/57] mm/collapse: assert the mm reference the engine relies on Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 49/57] mm/khugepaged: drop the mmap_lock barrier from __khugepaged_exit() Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 50/57] selftests/mm: attribute collapses by candidate event alone Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 51/57] selftests/mm: cover collapse inside a sub-PMD VMA Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 52/57] selftests/mm: cover a hole-y window in " Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 53/57] selftests/mm: cover collapse of mlocked ranges Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 54/57] selftests/mm: cover collapse beside a MADV_FREE'd page Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 55/57] selftests/mm: cover collapse beside a pinned page Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 56/57] selftests/mm: cover the scaled max_ptes_shared limit Kiryl Shutsemau
2026-08-16 22:46 ` [RFC PATCH 57/57] MAINTAINERS: add an entry for collapse Kiryl Shutsemau
2026-08-17 8:04 ` Lorenzo Stoakes (ARM)
2026-08-17 8:08 ` David Hildenbrand (Arm)
2026-08-17 10:12 ` Kiryl Shutsemau
2026-08-17 2:02 ` [RFC PATCH 00/57] mm/collapse: rebuild collapse on migration primitives Zi Yan
2026-08-17 10:07 ` Kiryl Shutsemau
2026-08-17 8:52 ` Lorenzo Stoakes (ARM)
2026-08-17 13:38 ` Kiryl Shutsemau
2026-08-18 13:06 ` Lorenzo Stoakes (ARM)
2026-08-18 14:12 ` David Hildenbrand (Arm)
2026-08-18 14:33 ` Lorenzo Stoakes (ARM)
2026-08-19 18:08 ` Kiryl Shutsemau
2026-08-24 14:22 ` Lorenzo Stoakes (ARM)
2026-08-24 14:59 ` Kiryl Shutsemau
2026-08-24 17:00 ` Lorenzo Stoakes (ARM)
2026-08-18 14:15 ` David Hildenbrand (Arm)
2026-08-18 14:41 ` Lorenzo Stoakes (ARM)
2026-08-19 18:22 ` Kiryl Shutsemau
2026-08-19 18:14 ` Kiryl Shutsemau
2026-08-18 13:55 ` David Hildenbrand (Arm)
2026-08-19 17:09 ` Kiryl Shutsemau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260825122354.98021-1-lance.yang@linux.dev \
--to=lance.yang@linux.dev \
--cc=agordeev@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=bpf@vger.kernel.org \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=hughd@google.com \
--cc=jannh@google.com \
--cc=kas@kernel.org \
--cc=kirill@shutemov.name \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=ljs@kernel.org \
--cc=mhiramat@kernel.org \
--cc=mhocko@suse.com \
--cc=nico.pache@linux.dev \
--cc=pfalcato@suse.de \
--cc=rostedt@goodmis.org \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=shuah@kernel.org \
--cc=surenb@google.com \
--cc=usama.anjum@arm.com \
--cc=usama.arif@linux.dev \
--cc=vbabka@kernel.org \
--cc=willy@infradead.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox