From: Jingyuan Liang <jingyliang@chromium.org>
To: Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <bentiss@kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Mark Brown <broonie@kernel.org>,
Steven Rostedt <rostedt@goodmis.org>,
Masami Hiramatsu <mhiramat@kernel.org>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-input@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
linux-trace-kernel@vger.kernel.org, devicetree@vger.kernel.org,
hbarnor@chromium.org, tfiga@chromium.org, fqwqf@fqwqf.xyz,
daleyo@gmail.com, Jingyuan Liang <jingyliang@chromium.org>
Subject: [PATCH v7 10/11] HID: spi-hid: add power management implementation
Date: Sat, 24 Oct 2026 00:51:44 +0000 [thread overview]
Message-ID: <20261024-send-upstream-v7-10-abad13174b43@chromium.org> (raw)
In-Reply-To: <20261024-send-upstream-v7-0-abad13174b43@chromium.org>
Implement HID over SPI driver power management callbacks.
Signed-off-by: Jingyuan Liang <jingyliang@chromium.org>
---
drivers/hid/spi-hid/spi-hid-acpi.c | 1 +
drivers/hid/spi-hid/spi-hid-core.c | 188 ++++++++++++++++++++++++++++++++++++-
drivers/hid/spi-hid/spi-hid-core.h | 2 +
drivers/hid/spi-hid/spi-hid-of.c | 1 +
drivers/hid/spi-hid/spi-hid.h | 2 +
5 files changed, 192 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/spi-hid/spi-hid-acpi.c b/drivers/hid/spi-hid/spi-hid-acpi.c
index df459c71e209..ea291ca269d4 100644
--- a/drivers/hid/spi-hid/spi-hid-acpi.c
+++ b/drivers/hid/spi-hid/spi-hid-acpi.c
@@ -246,6 +246,7 @@ static struct spi_driver spi_hid_acpi_driver = {
.driver = {
.name = "spi_hid_acpi",
.owner = THIS_MODULE,
+ .pm = &spi_hid_core_pm,
.acpi_match_table = spi_hid_acpi_match,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
diff --git a/drivers/hid/spi-hid/spi-hid-core.c b/drivers/hid/spi-hid/spi-hid-core.c
index 4ff93d22715c..3b8874ca0e1c 100644
--- a/drivers/hid/spi-hid/spi-hid-core.c
+++ b/drivers/hid/spi-hid/spi-hid-core.c
@@ -36,6 +36,8 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/pm_wakeirq.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/string.h>
@@ -60,6 +62,7 @@
#define SPI_HID_MAX_RESET_ATTEMPTS 3
#define SPI_HID_RESP_TIMEOUT 1000
+#define SPI_HID_RESET_TIMEOUT 1000
/* Protocol message size constants */
#define SPI_HID_READ_APPROVAL_LEN 5
@@ -91,6 +94,11 @@
* ll_close. Input reports are only forwarded while this flag is set.
*/
#define SPI_HID_STARTED 6
+/*
+ * dead indicates that the device was powered off after too many failed
+ * resets. It stays off until the driver is rebound, even across resume.
+ */
+#define SPI_HID_DEAD 7
/* Processed data from input report header */
struct spi_hid_input_header {
@@ -231,6 +239,147 @@ static const char *spi_hid_power_mode_string(enum hidspi_power_state power_state
}
}
+/*
+ * Wait for the device descriptor response after reset; the device then takes
+ * requests. Set READY here: the report descriptor check that normally sets it
+ * needs power_lock, which callers hold.
+ */
+static int spi_hid_wait_for_reset(struct spi_hid *shid)
+{
+ unsigned long timeout = msecs_to_jiffies(SPI_HID_RESET_TIMEOUT +
+ SPI_HID_RESP_TIMEOUT);
+
+ if (!wait_for_completion_timeout(&shid->reset_done, timeout)) {
+ dev_warn(&shid->spi->dev,
+ "Device descriptor not received after reset\n");
+ return -ETIMEDOUT;
+ }
+
+ set_bit(SPI_HID_READY, &shid->flags);
+ return 0;
+}
+
+static int spi_hid_suspend(struct spi_hid *shid)
+{
+ int error;
+ struct device *dev = &shid->spi->dev;
+
+ /*
+ * Stop reset_work until resume; pending steps keep their flags. The
+ * IRQ stays on so a request in flight gets its response.
+ */
+ disable_work_sync(&shid->reset_work);
+
+ /* HID driver suspend may talk to the device; responses need the IRQ. */
+ scoped_guard(mutex, &shid->power_lock) {
+ if (shid->power_state != HIDSPI_OFF && shid->hid) {
+ error = hid_driver_suspend(shid->hid, PMSG_SUSPEND);
+ if (error) {
+ dev_err(dev, "%s failed to suspend hid driver: %d\n",
+ __func__, error);
+ enable_work(&shid->reset_work);
+ /* Redo a schedule_work() dropped while disabled. */
+ schedule_work(&shid->reset_work);
+ return error;
+ }
+ }
+ }
+
+ /* disable_irq() waits for a running IRQ thread. */
+ disable_irq(shid->spi->irq);
+
+ guard(mutex)(&shid->power_lock);
+ if (!device_may_wakeup(dev)) {
+ if (shid->power_state != HIDSPI_OFF) {
+ /* Device is fully reset on resume; drop stale state. */
+ clear_bit(SPI_HID_READY, &shid->flags);
+ clear_bit(SPI_HID_RESET_RESPONSE, &shid->flags);
+ clear_bit(SPI_HID_CREATE_DEVICE, &shid->flags);
+ clear_bit(SPI_HID_ERROR, &shid->flags);
+ set_bit(SPI_HID_RESET_PENDING, &shid->flags);
+
+ shid->ops->assert_reset(shid->ops);
+
+ error = shid->ops->power_down(shid->ops);
+ if (error)
+ dev_err(dev, "%s: could not power down: %d\n", __func__, error);
+
+ /* Held in reset either way; resume resets it. */
+ shid->power_state = HIDSPI_OFF;
+ }
+ }
+ return 0;
+}
+
+static int spi_hid_resume(struct spi_hid *shid)
+{
+ int error;
+ struct device *dev = &shid->spi->dev;
+ bool was_reset = false;
+
+ guard(mutex)(&shid->power_lock);
+ enable_work(&shid->reset_work);
+ if (test_bit(SPI_HID_DEAD, &shid->flags)) {
+ /* Stay off; only balance disable_*() in suspend. */
+ enable_irq(shid->spi->irq);
+ return 0;
+ }
+
+ if (!device_may_wakeup(dev)) {
+ if (shid->power_state == HIDSPI_OFF) {
+ shid->ops->assert_reset(shid->ops);
+
+ shid->ops->sleep_minimal_reset_delay(shid->ops);
+
+ error = shid->ops->power_up(shid->ops);
+ if (error) {
+ dev_err(dev, "%s: could not power up: %d\n", __func__, error);
+ /* Suspend runs next even if resume fails. */
+ enable_irq(shid->spi->irq);
+ return error;
+ }
+ shid->power_state = HIDSPI_ON;
+ reinit_completion(&shid->reset_done);
+ error = shid->ops->deassert_reset(shid->ops);
+ if (error)
+ dev_err(dev, "%s: failed to deassert reset: %d\n",
+ __func__, error);
+ else
+ was_reset = true;
+ }
+ }
+
+ enable_irq(shid->spi->irq);
+
+ /*
+ * For devices that may wake up, process work that was pending while
+ * suspend had reset_work disabled. Otherwise suspend already dropped it.
+ */
+ if (test_bit(SPI_HID_RESET_RESPONSE, &shid->flags) ||
+ test_bit(SPI_HID_CREATE_DEVICE, &shid->flags) ||
+ test_bit(SPI_HID_ERROR, &shid->flags))
+ schedule_work(&shid->reset_work);
+
+ if (shid->hid) {
+ if (was_reset && spi_hid_wait_for_reset(shid)) {
+ /* No reset response: let recovery retry. */
+ set_bit(SPI_HID_ERROR, &shid->flags);
+ schedule_work(&shid->reset_work);
+ return -ETIMEDOUT;
+ }
+ /* HID requests would fail while the device is not ready. */
+ if (!test_bit(SPI_HID_READY, &shid->flags))
+ return 0;
+ error = hid_driver_reset_resume(shid->hid);
+ if (error) {
+ dev_err(dev, "%s: failed to reset resume hid driver: %d\n",
+ __func__, error);
+ return error;
+ }
+ }
+ return 0;
+}
+
static void spi_hid_stop_hid(struct spi_hid *shid)
{
struct hid_device *hid;
@@ -266,6 +415,7 @@ static void spi_hid_error_handler(struct spi_hid *shid)
if (error)
dev_err(dev, "failed to disable regulator: %d\n", error);
shid->power_state = HIDSPI_OFF;
+ set_bit(SPI_HID_DEAD, &shid->flags);
/* Dead device: leave the IRQ permanently disabled. */
return;
}
@@ -454,8 +604,8 @@ static void spi_hid_reset_response(struct spi_hid *shid)
error = spi_hid_sync_request(shid, &report);
if (error) {
- dev_WARN_ONCE(dev, true,
- "Failed to send device descriptor request: %d\n", error);
+ dev_err(dev, "Failed to send device descriptor request: %d\n",
+ error);
set_bit(SPI_HID_ERROR, &shid->flags);
schedule_work(&shid->reset_work);
}
@@ -546,6 +696,8 @@ static int spi_hid_dev_desc_response(struct spi_hid *shid,
set_bit(SPI_HID_CREATE_DEVICE, &shid->flags);
schedule_work(&shid->reset_work);
+ /* The device can take requests now; see spi_hid_wait_for_reset(). */
+ complete(&shid->reset_done);
return 0;
}
@@ -1325,6 +1477,7 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
mutex_init(&shid->power_lock);
mutex_init(&shid->io_lock);
init_completion(&shid->output_done);
+ init_completion(&shid->reset_done);
INIT_WORK(&shid->reset_work, spi_hid_reset_work);
@@ -1358,6 +1511,18 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
return error;
}
+ /*
+ * Use device_can_wakeup(), not device_may_wakeup(): power/wakeup can
+ * change after probe, and the PM core checks it at suspend time.
+ */
+ if (device_can_wakeup(dev)) {
+ error = devm_pm_set_wake_irq(dev, spi->irq);
+ if (error) {
+ dev_err(dev, "%s: failed to set wake IRQ\n", __func__);
+ return error;
+ }
+ }
+
error = shid->ops->power_up(shid->ops);
if (error) {
dev_err(dev, "%s: could not power up: %d\n", __func__, error);
@@ -1398,6 +1563,25 @@ void spi_hid_core_remove(struct spi_device *spi)
}
EXPORT_SYMBOL_GPL(spi_hid_core_remove);
+static int spi_hid_core_pm_suspend(struct device *dev)
+{
+ struct spi_hid *shid = dev_get_drvdata(dev);
+
+ return spi_hid_suspend(shid);
+}
+
+static int spi_hid_core_pm_resume(struct device *dev)
+{
+ struct spi_hid *shid = dev_get_drvdata(dev);
+
+ return spi_hid_resume(shid);
+}
+
+const struct dev_pm_ops spi_hid_core_pm = {
+ SYSTEM_SLEEP_PM_OPS(spi_hid_core_pm_suspend, spi_hid_core_pm_resume)
+};
+EXPORT_SYMBOL_GPL(spi_hid_core_pm);
+
MODULE_DESCRIPTION("HID over SPI transport driver");
MODULE_AUTHOR("Dmitry Antipov <dmanti@microsoft.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/hid/spi-hid/spi-hid-core.h b/drivers/hid/spi-hid/spi-hid-core.h
index e66594b7a8cb..060272353216 100644
--- a/drivers/hid/spi-hid/spi-hid-core.h
+++ b/drivers/hid/spi-hid/spi-hid-core.h
@@ -92,6 +92,8 @@ struct spi_hid {
struct mutex io_lock;
struct completion output_done;
+ /* Completed once the device descriptor is received after a reset. */
+ struct completion reset_done;
u32 report_descriptor_crc32; /* HID report descriptor crc32 checksum. */
diff --git a/drivers/hid/spi-hid/spi-hid-of.c b/drivers/hid/spi-hid/spi-hid-of.c
index d1bbdc17102e..6de9affbebe9 100644
--- a/drivers/hid/spi-hid/spi-hid-of.c
+++ b/drivers/hid/spi-hid/spi-hid-of.c
@@ -195,6 +195,7 @@ static struct spi_driver spi_hid_of_driver = {
.driver = {
.name = "spi_hid_of",
.owner = THIS_MODULE,
+ .pm = &spi_hid_core_pm,
.of_match_table = spi_hid_of_match,
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
diff --git a/drivers/hid/spi-hid/spi-hid.h b/drivers/hid/spi-hid/spi-hid.h
index a31956ef24ef..95acb2845246 100644
--- a/drivers/hid/spi-hid/spi-hid.h
+++ b/drivers/hid/spi-hid/spi-hid.h
@@ -40,4 +40,6 @@ int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
void spi_hid_core_remove(struct spi_device *spi);
+extern const struct dev_pm_ops spi_hid_core_pm;
+
#endif /* SPI_HID_H */
--
2.56.0.257.gf7497c7d27-goog
next prev parent reply other threads:[~2026-10-24 0:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-24 0:51 [PATCH v7 00/11] Add spi-hid transport driver Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 01/11] Documentation: Correction in HID output_report callback description Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 02/11] HID: Add BUS_SPI support and define HID_SPI_DEVICE macro Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 03/11] HID: spi-hid: add transport driver skeleton for HID over SPI bus Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 04/11] HID: spi-hid: add spi-hid driver HID layer Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 05/11] HID: spi-hid: add HID SPI protocol implementation Jingyuan Liang
2026-10-24 1:13 ` sashiko-bot
2026-10-24 0:51 ` [PATCH v7 06/11] HID: spi-hid: add spi_hid traces Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 07/11] HID: spi-hid: add ACPI support for HID over SPI Jingyuan Liang
2026-10-24 0:51 ` [PATCH v7 08/11] dt-bindings: input: Document hid-over-spi DT schema Jingyuan Liang
2026-10-27 18:17 ` Conor Dooley
2026-10-27 19:10 ` Rob Herring (Arm)
2026-10-24 0:51 ` [PATCH v7 09/11] HID: spi-hid: add device tree support for HID over SPI Jingyuan Liang
2026-10-24 0:51 ` Jingyuan Liang [this message]
2026-10-24 1:19 ` [PATCH v7 10/11] HID: spi-hid: add power management implementation sashiko-bot
2026-10-24 0:51 ` [PATCH v7 11/11] HID: spi-hid: add panel follower support Jingyuan Liang
2026-10-24 1:10 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261024-send-upstream-v7-10-abad13174b43@chromium.org \
--to=jingyliang@chromium.org \
--cc=bentiss@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=daleyo@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=fqwqf@fqwqf.xyz \
--cc=hbarnor@chromium.org \
--cc=jikos@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=robh@kernel.org \
--cc=rostedt@goodmis.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox