Re: [PATCH 0/5] Rework system pressure interface to the scheduler

[Vincent Guittot <vincent.guittot@linaro.org>]

On Thu, 14 Dec 2023 at 09:21, Lukasz Luba <lukasz.luba@arm.com> wrote:
>
> Hi Vincent,
>
> I've been waiting for this feature, thanks!
>
>
> On 12/12/23 14:27, Vincent Guittot wrote:
> > Following the consolidation and cleanup of CPU capacity in [1], this serie
> > reworks how the scheduler gets the pressures on CPUs. We need to take into
> > account all pressures applied by cpufreq on the compute capacity of a CPU
> > for dozens of ms or more and not only cpufreq cooling device or HW
> > mitigiations. we split the pressure applied on CPU's capacity in 2 parts:
> > - one from cpufreq and freq_qos
> > - one from HW high freq mitigiation.
> >
> > The next step will be to add a dedicated interface for long standing
> > capping of the CPU capacity (i.e. for seconds or more) like the
> > scaling_max_freq of cpufreq sysfs. The latter is already taken into
> > account by this serie but as a temporary pressure which is not always the
> > best choice when we know that it will happen for seconds or more.
> >
> > [1] https://lore.kernel.org/lkml/20231211104855.558096-1-vincent.guittot@linaro.org/
> >
> > Vincent Guittot (4):
> >    cpufreq: Add a cpufreq pressure feedback for the scheduler
> >    sched: Take cpufreq feedback into account
> >    thermal/cpufreq: Remove arch_update_thermal_pressure()
> >    sched: Rename arch_update_thermal_pressure into
> >      arch_update_hw_pressure
> >
> >   arch/arm/include/asm/topology.h               |  6 +--
> >   arch/arm64/include/asm/topology.h             |  6 +--
> >   drivers/base/arch_topology.c                  | 26 ++++-----
> >   drivers/cpufreq/cpufreq.c                     | 48 +++++++++++++++++
> >   drivers/cpufreq/qcom-cpufreq-hw.c             |  4 +-
> >   drivers/thermal/cpufreq_cooling.c             |  3 --
> >   include/linux/arch_topology.h                 |  8 +--
> >   include/linux/cpufreq.h                       | 10 ++++
> >   include/linux/sched/topology.h                |  8 +--
> >   .../{thermal_pressure.h => hw_pressure.h}     | 14 ++---
> >   include/trace/events/sched.h                  |  2 +-
> >   init/Kconfig                                  | 12 ++---
> >   kernel/sched/core.c                           |  8 +--
> >   kernel/sched/fair.c                           | 53 ++++++++++---------
> >   kernel/sched/pelt.c                           | 18 +++----
> >   kernel/sched/pelt.h                           | 16 +++---
> >   kernel/sched/sched.h                          |  4 +-
> >   17 files changed, 152 insertions(+), 94 deletions(-)
> >   rename include/trace/events/{thermal_pressure.h => hw_pressure.h} (55%)
> >
>
> I would like to test it, but something worries me. Why there is 0/5 in
> this subject and only 4 patches?

I removed a patch from the series but copied/pasted the cover letter
subject without noticing the /5 instead of /4

>
> Could you tell me your base branch that I can apply this, please?

It applies on top of tip/sched/core + [1]
and you can find it here:
https://git.linaro.org/people/vincent.guittot/kernel.git/log/?h=sched/system-pressure

>
> Regards,
> Lukasz