linux-trace-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vishal Chourasia <vishalc@linux.ibm.com>
To: Naveen N Rao <naveen@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org,
	linux-trace-kernel@vger.kernel.org, bpf@vger.kernel.org,
	Michael Ellerman <mpe@ellerman.id.au>,
	Steven Rostedt <rostedt@goodmis.org>,
	Masami Hiramatsu <mhiramat@kernel.org>,
	Nicholas Piggin <npiggin@gmail.com>,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	Masahiro Yamada <masahiroy@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	John Fastabend <john.fastabend@gmail.com>,
	Andrii Nakryiko <andrii@kernel.org>, Song Liu <song@kernel.org>,
	Jiri Olsa <jolsa@kernel.org>,
	Vishal Chourasia <vishalc@linux.ibm.com>
Subject: Re: [RFC PATCH v3 00/11] powerpc: Add support for ftrace direct and BPF trampolines
Date: Wed, 3 Jul 2024 16:41:27 +0530	[thread overview]
Message-ID: <ZoUx37C0bXB66MNG@linux.ibm.com> (raw)
In-Reply-To: <cover.1718908016.git.naveen@kernel.org>

On Fri, Jun 21, 2024 at 12:24:03AM +0530, Naveen N Rao wrote:
> This is v3 of the patches posted here:
> http://lkml.kernel.org/r/cover.1718008093.git.naveen@kernel.org
> 
> Since v2, I have addressed review comments from Steven and Masahiro 
> along with a few fixes. Patches 7-11 are new in this series and add 
> support for ftrace direct and bpf trampolines. 
> 
> This series depends on the patch series from Benjamin Gray adding 
> support for patch_ulong():
> http://lkml.kernel.org/r/20240515024445.236364-1-bgray@linux.ibm.com
> 
> 
> - Naveen

Hello Naveen,

I've noticed an issue with `kstack()` in bpftrace [1] when using `kfunc` 
compared to `kprobe`. Despite trying all three modes specified in the 
documentation (bpftrace, perf, or raw), the stack isn't unwinding 
properly with `kfunc`. 

[1] https://github.com/bpftrace/bpftrace/blob/master/man/adoc/bpftrace.adoc#kstack


for mode in modes; do
	run bpftrace with kfunc
	disable cpu
	kill bpftrace
	run bpftrace with kprobe
	enable cpu
	kill bpftrace

# ./kprobe_vs_kfunc.sh
+ bpftrace -e 'kfunc:vmlinux:build_sched_domains {@[kstack(bpftrace), comm, tid]=count();}'
Attaching 1 probe...
+ chcpu -d 2-3
CPU 2 disabled
CPU 3 disabled
+ kill 35214

@[
    bpf_prog_cfd8d6c8bb4898ce+972
, cpuhp/2, 33]: 1
@[
    bpf_prog_cfd8d6c8bb4898ce+972
, cpuhp/3, 38]: 1

+ bpftrace -e 'kprobe:build_sched_domains {@[kstack(bpftrace), comm, tid]=count();}'
Attaching 1 probe...
+ chcpu -e 2-3
CPU 2 enabled
CPU 3 enabled
+ kill 35221

@[
    0x80000007642bdfb4
    partition_sched_domains_locked+1304
    rebuild_sched_domains_locked+216
    cpuset_handle_hotplug+1148
    sched_cpu_activate+664
    cpuhp_invoke_callback+480
    cpuhp_thread_fun+244
    smpboot_thread_fn+460
    kthread+308
    start_kernel_thread+20
, cpuhp/3, 38]: 1
@[
    0x80000007524b34a4
    partition_sched_domains_locked+1304
    rebuild_sched_domains_locked+216
    cpuset_handle_hotplug+1148
    sched_cpu_activate+664
    cpuhp_invoke_callback+480
    cpuhp_thread_fun+244
    smpboot_thread_fn+460
    kthread+308
    start_kernel_thread+20
, cpuhp/2, 33]: 1

+ bpftrace -e 'kfunc:vmlinux:build_sched_domains {@[kstack(perf), comm, tid]=count();}'
Attaching 1 probe...
+ chcpu -d 2-3
CPU 2 disabled
CPU 3 disabled
+ kill 35229

@[
        c008000003433454 bpf_prog_cfd8d6c8bb4898ce+960
, cpuhp/3, 38]: 1
@[
        c008000003433454 bpf_prog_cfd8d6c8bb4898ce+960
, cpuhp/2, 33]: 1


+ bpftrace -e 'kprobe:build_sched_domains {@[kstack(perf), comm, tid]=count();}'
Attaching 1 probe...
+ chcpu -e 2-3
CPU 2 enabled
CPU 3 enabled
+ kill 35235

@[
        80000007524b379c 0x80000007524b379c
        c000000000206268 partition_sched_domains_locked+1304
        c0000000002cbf08 rebuild_sched_domains_locked+216
        c0000000002cfd5c cpuset_handle_hotplug+1148
        c0000000001b3178 sched_cpu_activate+664
        c000000000156fc0 cpuhp_invoke_callback+480
        c000000000157974 cpuhp_thread_fun+244
        c00000000019ddec smpboot_thread_fn+460
        c0000000001932c4 kthread+308
        c00000000000dd58 start_kernel_thread+20
, cpuhp/2, 33]: 1
@[
        80000007642b9b6c 0x80000007642b9b6c
        c000000000206268 partition_sched_domains_locked+1304
        c0000000002cbf08 rebuild_sched_domains_locked+216
        c0000000002cfd5c cpuset_handle_hotplug+1148
        c0000000001b3178 sched_cpu_activate+664
        c000000000156fc0 cpuhp_invoke_callback+480
        c000000000157974 cpuhp_thread_fun+244
        c00000000019ddec smpboot_thread_fn+460
        c0000000001932c4 kthread+308
        c00000000000dd58 start_kernel_thread+20
, cpuhp/3, 38]: 1

+ bpftrace -e 'kfunc:vmlinux:build_sched_domains {@[kstack(raw), comm, tid]=count();}'
Attaching 1 probe...
+ chcpu -d 2-3
CPU 2 disabled
CPU 3 disabled
+ kill 35243

@[
c00800000343346c
, cpuhp/3, 38]: 1
@[
c00800000343346c
, cpuhp/2, 33]: 1


+ bpftrace -e 'kprobe:build_sched_domains {@[kstack(raw), comm, tid]=count();}'
Attaching 1 probe...
+ chcpu -e 2-3
CPU 2 enabled
CPU 3 enabled
+ kill 35249

@[
80000007642befac
c000000000206268
c0000000002cbf08
c0000000002cfd5c
c0000000001b3178
c000000000156fc0
c000000000157974
c00000000019ddec
c0000000001932c4
c00000000000dd58
, cpuhp/3, 38]: 1
@[
80000007524b425c
c000000000206268
c0000000002cbf08
c0000000002cfd5c
c0000000001b3178
c000000000156fc0
c000000000157974
c00000000019ddec
c0000000001932c4
c00000000000dd58
, cpuhp/2, 33]: 1

> 
> 
> Naveen N Rao (11):
>   powerpc/kprobes: Use ftrace to determine if a probe is at function
>     entry
>   powerpc/ftrace: Unify 32-bit and 64-bit ftrace entry code
>   powerpc/module_64: Convert #ifdef to IS_ENABLED()
>   powerpc/ftrace: Remove pointer to struct module from dyn_arch_ftrace
>   kbuild: Add generic hook for architectures to use before the final
>     vmlinux link
>   powerpc64/ftrace: Move ftrace sequence out of line
>   powerpc/ftrace: Add support for DYNAMIC_FTRACE_WITH_CALL_OPS
>   powerpc/ftrace: Add support for DYNAMIC_FTRACE_WITH_DIRECT_CALLS
>   samples/ftrace: Add support for ftrace direct samples on powerpc
>   powerpc64/bpf: Fold bpf_jit_emit_func_call_hlp() into
>     bpf_jit_emit_func_call_rel()
>   powerpc64/bpf: Add support for bpf trampolines
> 
>  arch/Kconfig                                |   3 +
>  arch/powerpc/Kconfig                        |   9 +
>  arch/powerpc/Makefile                       |   8 +
>  arch/powerpc/include/asm/ftrace.h           |  29 +-
>  arch/powerpc/include/asm/module.h           |   5 +
>  arch/powerpc/include/asm/ppc-opcode.h       |  14 +
>  arch/powerpc/kernel/asm-offsets.c           |  11 +
>  arch/powerpc/kernel/kprobes.c               |  18 +-
>  arch/powerpc/kernel/module_64.c             |  67 +-
>  arch/powerpc/kernel/trace/ftrace.c          | 269 +++++++-
>  arch/powerpc/kernel/trace/ftrace_64_pg.c    |  73 +-
>  arch/powerpc/kernel/trace/ftrace_entry.S    | 210 ++++--
>  arch/powerpc/kernel/vmlinux.lds.S           |   3 +-
>  arch/powerpc/net/bpf_jit.h                  |  11 +
>  arch/powerpc/net/bpf_jit_comp.c             | 702 +++++++++++++++++++-
>  arch/powerpc/net/bpf_jit_comp32.c           |   7 +-
>  arch/powerpc/net/bpf_jit_comp64.c           |  68 +-
>  arch/powerpc/tools/Makefile                 |  10 +
>  arch/powerpc/tools/gen-ftrace-pfe-stubs.sh  |  49 ++
>  samples/ftrace/ftrace-direct-modify.c       |  85 ++-
>  samples/ftrace/ftrace-direct-multi-modify.c | 101 ++-
>  samples/ftrace/ftrace-direct-multi.c        |  79 ++-
>  samples/ftrace/ftrace-direct-too.c          |  83 ++-
>  samples/ftrace/ftrace-direct.c              |  69 +-
>  scripts/Makefile.vmlinux                    |   8 +
>  scripts/link-vmlinux.sh                     |  11 +-
>  26 files changed, 1813 insertions(+), 189 deletions(-)
>  create mode 100644 arch/powerpc/tools/Makefile
>  create mode 100755 arch/powerpc/tools/gen-ftrace-pfe-stubs.sh
> 
> 
> base-commit: e2b06d707dd067509cdc9ceba783c06fa6a551c2
> prerequisite-patch-id: a1d50e589288239d5a8b1c1f354cd4737057c9d3
> prerequisite-patch-id: da4142d56880861bd0ad7ad7087c9e2670a2ee54
> prerequisite-patch-id: 609d292e054b2396b603890522a940fa0bdfb6d8
> prerequisite-patch-id: 6f7213fb77b1260defbf43be0e47bff9c80054cc
> prerequisite-patch-id: ad3b71bf071ae4ba1bee5b087e61a2055772a74f
> -- 
> 2.45.2
> 

  parent reply	other threads:[~2024-07-03 11:12 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-20 18:54 [RFC PATCH v3 00/11] powerpc: Add support for ftrace direct and BPF trampolines Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 01/11] powerpc/kprobes: Use ftrace to determine if a probe is at function entry Naveen N Rao
2024-07-01  8:40   ` Nicholas Piggin
2024-07-01 18:18     ` Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 02/11] powerpc/ftrace: Unify 32-bit and 64-bit ftrace entry code Naveen N Rao
2024-07-01  8:57   ` Nicholas Piggin
2024-07-01 18:34     ` Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 03/11] powerpc/module_64: Convert #ifdef to IS_ENABLED() Naveen N Rao
2024-07-01  9:01   ` Nicholas Piggin
2024-06-20 18:54 ` [RFC PATCH v3 04/11] powerpc/ftrace: Remove pointer to struct module from dyn_arch_ftrace Naveen N Rao
2024-07-01  9:27   ` Nicholas Piggin
2024-07-01 18:51     ` Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 05/11] kbuild: Add generic hook for architectures to use before the final vmlinux link Naveen N Rao
2024-07-01  9:30   ` Nicholas Piggin
2024-06-20 18:54 ` [RFC PATCH v3 06/11] powerpc64/ftrace: Move ftrace sequence out of line Naveen N Rao
2024-07-01 10:39   ` Nicholas Piggin
2024-07-01 19:44     ` Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 07/11] powerpc/ftrace: Add support for DYNAMIC_FTRACE_WITH_CALL_OPS Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 08/11] powerpc/ftrace: Add support for DYNAMIC_FTRACE_WITH_DIRECT_CALLS Naveen N Rao
2024-06-20 18:54 ` [RFC PATCH v3 09/11] samples/ftrace: Add support for ftrace direct samples on powerpc Naveen N Rao
2024-06-20 19:09 ` [RFC PATCH v3 10/11] powerpc64/bpf: Fold bpf_jit_emit_func_call_hlp() into bpf_jit_emit_func_call_rel() Naveen N Rao
2024-06-20 19:09 ` [RFC PATCH v3 11/11] powerpc64/bpf: Add support for bpf trampolines Naveen N Rao
2024-07-01 11:03   ` Nicholas Piggin
2024-07-01 19:58     ` Naveen N Rao
2024-06-24 11:59 ` [RFC PATCH v3 00/11] powerpc: Add support for ftrace direct and BPF trampolines Vishal Chourasia
2024-07-03 11:11 ` Vishal Chourasia [this message]
2024-07-14  7:52   ` Naveen N Rao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZoUx37C0bXB66MNG@linux.ibm.com \
    --to=vishalc@linux.ibm.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=daniel@iogearbox.net \
    --cc=john.fastabend@gmail.com \
    --cc=jolsa@kernel.org \
    --cc=linux-trace-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mark.rutland@arm.com \
    --cc=masahiroy@kernel.org \
    --cc=mhiramat@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=naveen@kernel.org \
    --cc=npiggin@gmail.com \
    --cc=rostedt@goodmis.org \
    --cc=song@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).