From: Jiri Olsa <olsajiri@gmail.com>
To: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Cc: bpf@vger.kernel.org, linux-trace-kernel@vger.kernel.org,
linux-kselftest@vger.kernel.org, ast@kernel.org,
daniel@iogearbox.net, andrii@kernel.org, song@kernel.org,
rostedt@goodmis.org, naveen@kernel.org, davem@davemloft.net,
mhiramat@kernel.org, stable@vger.kernel.org,
linux-open-source@crowdstrike.com
Subject: Re: [RFC PATCH bpf-next 3/3] selftests/bpf: add ftrace_permanent test
Date: Wed, 29 Jul 2026 15:23:09 +0200 [thread overview]
Message-ID: <amn-vbX6AitcIcC0@krava> (raw)
In-Reply-To: <20260729005959.3853865-4-andrey.grodzovsky@crowdstrike.com>
On Tue, Jul 28, 2026 at 08:59:59PM -0400, Andrey Grodzovsky wrote:
> Cover the FTRACE_OPS_FL_PERMANENT fix on BPF trampolines and
> ftrace-based kprobes/kretprobes: attach a fentry, fexit, kprobe, and
> kretprobe program in turn and confirm kernel.ftrace_enabled=0 is
> refused with EBUSY while attached, then succeeds once detached. Also
> confirm a new fentry/kprobe attach is itself refused while
> ftrace_enabled=0 is already in effect.
>
> kprobe.multi/kretprobe.multi/kprobe.session are intentionally not
> covered, matching the production change's scope.
>
> Skip the kprobe/kretprobe subtests when CONFIG_KPROBES_ON_FTRACE is
> off (e.g. arm64), read back via skel->kconfig->CONFIG_KPROBES_ON_FTRACE
> (same __kconfig idiom as progs/test_fill_link_info.c).
>
> Assisted-by: Claude:claude-sonnet-5
> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
> ---
hi,
I have some links active already after boot which makes test to fail:
[root@qemu-1 bpf]# echo 0 > /proc/sys/kernel/ftrace_enabled
bash: echo: write error: Device or resource busy
[root@qemu-1 bpf]# ./test_progs -t ftrace_permanent -v
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_ftrace_permanent:PASS:skel_open_and_load 0 nsec
check_blocks_disable:PASS:attach_fentry 0 nsec
check_blocks_disable:PASS:disable_refused 0 nsec
check_blocks_disable:PASS:read_back 0 nsec
check_blocks_disable:PASS:still_enabled 0 nsec
check_blocks_disable:FAIL:disable_after_detach unexpected error: -16 (errno 16)
check_blocks_disable:PASS:reenable 0 nsec
#145/1 ftrace_permanent/fentry_blocks_disable:FAIL
check_blocks_disable:PASS:attach_fexit 0 nsec
check_blocks_disable:PASS:disable_refused 0 nsec
check_blocks_disable:PASS:read_back 0 nsec
check_blocks_disable:PASS:still_enabled 0 nsec
check_blocks_disable:FAIL:disable_after_detach unexpected error: -16 (errno 16)
check_blocks_disable:PASS:reenable 0 nsec
#145/2 ftrace_permanent/fexit_blocks_disable:FAIL
check_blocks_disable:PASS:attach_kprobe 0 nsec
check_blocks_disable:PASS:disable_refused 0 nsec
check_blocks_disable:PASS:read_back 0 nsec
check_blocks_disable:PASS:still_enabled 0 nsec
check_blocks_disable:FAIL:disable_after_detach unexpected error: -16 (errno 16)
check_blocks_disable:PASS:reenable 0 nsec
#145/3 ftrace_permanent/kprobe_blocks_disable:FAIL
check_blocks_disable:PASS:attach_kretprobe 0 nsec
check_blocks_disable:PASS:disable_refused 0 nsec
check_blocks_disable:PASS:read_back 0 nsec
check_blocks_disable:PASS:still_enabled 0 nsec
check_blocks_disable:FAIL:disable_after_detach unexpected error: -16 (errno 16)
check_blocks_disable:PASS:reenable 0 nsec
#145/4 ftrace_permanent/kretprobe_blocks_disable:FAIL
check_attach_while_disabled_refused:FAIL:disable unexpected error: -16 (errno 16)
#145/5 ftrace_permanent/fentry_attach_while_disabled_refused:FAIL
check_attach_while_disabled_refused:FAIL:disable unexpected error: -16 (errno 16)
#145/6 ftrace_permanent/kprobe_attach_while_disabled_refused:FAIL
#145 ftrace_permanent:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
jirka
> .../bpf/prog_tests/ftrace_permanent.c | 144 ++++++++++++++++++
> .../selftests/bpf/progs/ftrace_permanent.c | 43 ++++++
> 2 files changed, 187 insertions(+)
> create mode 100644 tools/testing/selftests/bpf/prog_tests/ftrace_permanent.c
> create mode 100644 tools/testing/selftests/bpf/progs/ftrace_permanent.c
>
> diff --git a/tools/testing/selftests/bpf/prog_tests/ftrace_permanent.c b/tools/testing/selftests/bpf/prog_tests/ftrace_permanent.c
> new file mode 100644
> index 000000000000..dbe78009a291
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/prog_tests/ftrace_permanent.c
> @@ -0,0 +1,144 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2026 CrowdStrike */
> +#include <test_progs.h>
> +#include "ftrace_permanent.skel.h"
> +
> +/*
> + * fentry/fexit/kprobe/kretprobe now carry FTRACE_OPS_FL_PERMANENT, so
> + * kernel.ftrace_enabled=0 must be refused with EBUSY while any of them
> + * is attached, and allowed again once detached.
> + *
> + * kprobe.multi/kretprobe.multi/kprobe.session are out of scope.
> + * kprobe/kretprobe subtests need CONFIG_KPROBES_ON_FTRACE (e.g. not on
> + * arm64) and are skipped otherwise.
> + */
> +
> +#define FTRACE_ENABLED_PATH "/proc/sys/kernel/ftrace_enabled"
> +
> +static int read_ftrace_enabled(int *val)
> +{
> + char buf[16] = {};
> + int fd, n;
> +
> + fd = open(FTRACE_ENABLED_PATH, O_RDONLY);
> + if (fd < 0)
> + return -errno;
> + n = read(fd, buf, sizeof(buf) - 1);
> + close(fd);
> + if (n <= 0)
> + return -EIO;
> + *val = atoi(buf);
> + return 0;
> +}
> +
> +/* Returns 0 on success, or -errno on write failure. */
> +static int write_ftrace_enabled(int val)
> +{
> + char buf[4];
> + int fd, n, len, err = 0;
> +
> + fd = open(FTRACE_ENABLED_PATH, O_WRONLY);
> + if (fd < 0)
> + return -errno;
> + len = snprintf(buf, sizeof(buf), "%d", val);
> + n = write(fd, buf, len);
> + if (n < 0)
> + err = -errno;
> + close(fd);
> + return err;
> +}
> +
> +/*
> + * Attach @prog, assert kernel.ftrace_enabled=0 is refused while attached
> + * and stays at 1, then detach and assert the disable now succeeds.
> + */
> +static void check_blocks_disable(struct bpf_program *prog, const char *name)
> +{
> + struct bpf_link *link;
> + int val, err;
> +
> + link = bpf_program__attach(prog);
> + if (!ASSERT_OK_PTR(link, name))
> + return;
> +
> + err = write_ftrace_enabled(0);
> + ASSERT_EQ(err, -EBUSY, "disable_refused");
> + if (!ASSERT_OK(read_ftrace_enabled(&val), "read_back"))
> + goto detach;
> + ASSERT_EQ(val, 1, "still_enabled");
> +
> +detach:
> + bpf_link__destroy(link);
> +
> + ASSERT_OK(write_ftrace_enabled(0), "disable_after_detach");
> + ASSERT_OK(write_ftrace_enabled(1), "reenable");
> +}
> +
> +/* Attach @prog while ftrace_enabled=0 and assert it is refused. */
> +static void check_attach_while_disabled_refused(struct bpf_program *prog, const char *name)
> +{
> + struct bpf_link *link;
> +
> + if (!ASSERT_OK(write_ftrace_enabled(0), "disable"))
> + return;
> +
> + link = bpf_program__attach(prog);
> + if (!ASSERT_ERR_PTR(link, name))
> + bpf_link__destroy(link);
> +
> + ASSERT_OK(write_ftrace_enabled(1), "reenable");
> +}
> +
> +void test_ftrace_permanent(void)
> +{
> + struct ftrace_permanent *skel;
> + bool kprobes_on_ftrace;
> + int orig = 1;
> +
> + /* Save and always restore ftrace_enabled. */
> + if (read_ftrace_enabled(&orig)) {
> + test__skip();
> + return;
> + }
> +
> + skel = ftrace_permanent__open_and_load();
> + if (!ASSERT_OK_PTR(skel, "skel_open_and_load"))
> + goto restore;
> +
> + kprobes_on_ftrace = skel->kconfig->CONFIG_KPROBES_ON_FTRACE;
> +
> + if (test__start_subtest("fentry_blocks_disable"))
> + check_blocks_disable(skel->progs.test_fentry, "attach_fentry");
> +
> + if (test__start_subtest("fexit_blocks_disable"))
> + check_blocks_disable(skel->progs.test_fexit, "attach_fexit");
> +
> + if (test__start_subtest("kprobe_blocks_disable")) {
> + if (kprobes_on_ftrace)
> + check_blocks_disable(skel->progs.test_kprobe, "attach_kprobe");
> + else
> + test__skip();
> + }
> +
> + if (test__start_subtest("kretprobe_blocks_disable")) {
> + if (kprobes_on_ftrace)
> + check_blocks_disable(skel->progs.test_kretprobe, "attach_kretprobe");
> + else
> + test__skip();
> + }
> +
> + if (test__start_subtest("fentry_attach_while_disabled_refused"))
> + check_attach_while_disabled_refused(skel->progs.test_fentry, "attach_fentry");
> +
> + if (test__start_subtest("kprobe_attach_while_disabled_refused")) {
> + if (kprobes_on_ftrace)
> + check_attach_while_disabled_refused(skel->progs.test_kprobe,
> + "attach_kprobe");
> + else
> + test__skip();
> + }
> +
> + ftrace_permanent__destroy(skel);
> +restore:
> + write_ftrace_enabled(orig);
> +}
> diff --git a/tools/testing/selftests/bpf/progs/ftrace_permanent.c b/tools/testing/selftests/bpf/progs/ftrace_permanent.c
> new file mode 100644
> index 000000000000..ca706d8edc23
> --- /dev/null
> +++ b/tools/testing/selftests/bpf/progs/ftrace_permanent.c
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2026 CrowdStrike */
> +#include "vmlinux.h"
> +#include <bpf/bpf_helpers.h>
> +#include <bpf/bpf_tracing.h>
> +#include <stdbool.h>
> +
> +char _license[] SEC("license") = "GPL";
> +
> +extern bool CONFIG_KPROBES_ON_FTRACE __kconfig __weak;
> +
> +/* This function is here to have CONFIG_KPROBES_ON_FTRACE used and
> + * added to object BTF, so the userspace side can read it back via
> + * skel->kconfig->CONFIG_KPROBES_ON_FTRACE.
> + */
> +int unused(void)
> +{
> + return CONFIG_KPROBES_ON_FTRACE ? 0 : 1;
> +}
> +
> +SEC("fentry/bpf_fentry_test1")
> +int BPF_PROG(test_fentry, int a)
> +{
> + return 0;
> +}
> +
> +SEC("fexit/bpf_fentry_test2")
> +int BPF_PROG(test_fexit, int a, __u64 b)
> +{
> + return 0;
> +}
> +
> +SEC("kprobe/bpf_fentry_test3")
> +int test_kprobe(struct pt_regs *ctx)
> +{
> + return 0;
> +}
> +
> +SEC("kretprobe/bpf_fentry_test4")
> +int BPF_KRETPROBE(test_kretprobe)
> +{
> + return 0;
> +}
> --
> 2.34.1
>
next prev parent reply other threads:[~2026-07-29 13:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 0:59 [RFC PATCH bpf-next 0/3] ftrace, kprobes, bpf: mark trampoline/kprobe ftrace_ops permanent Andrey Grodzovsky
2026-07-29 0:59 ` [RFC PATCH bpf-next 1/3] bpf: mark trampoline " Andrey Grodzovsky
2026-07-29 13:29 ` Jiri Olsa
2026-07-29 0:59 ` [RFC PATCH bpf-next 2/3] kprobes: mark ftrace-based kprobe ops permanent Andrey Grodzovsky
2026-07-29 0:59 ` [RFC PATCH bpf-next 3/3] selftests/bpf: add ftrace_permanent test Andrey Grodzovsky
2026-07-29 13:23 ` Jiri Olsa [this message]
2026-07-29 17:16 ` Andrey Grodzovsky
2026-07-29 17:38 ` Steven Rostedt
2026-07-29 14:41 ` [RFC PATCH bpf-next 0/3] ftrace, kprobes, bpf: mark trampoline/kprobe ftrace_ops permanent Steven Rostedt
2026-07-29 15:00 ` Andrey Grodzovsky
2026-07-29 15:31 ` Steven Rostedt
2026-07-29 15:47 ` Linus Torvalds
2026-07-29 17:32 ` Steven Rostedt
2026-07-29 17:53 ` Steven Rostedt
[not found] ` <CAOu3gNg6kNYp-Sc9Eme6yW7Nu7wV6hZ9=CG0eptROfhQ-H8nFA@mail.gmail.com>
2026-07-29 19:45 ` Steven Rostedt
2026-07-29 19:48 ` Andrey Grodzovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amn-vbX6AitcIcC0@krava \
--to=olsajiri@gmail.com \
--cc=andrey.grodzovsky@crowdstrike.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-open-source@crowdstrike.com \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=naveen@kernel.org \
--cc=rostedt@goodmis.org \
--cc=song@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox