From: Frank Li <Frank.li@oss.nxp.com>
To: Praveen Talari <praveen.talari@oss.qualcomm.com>
Cc: konrad.dybcio@oss.qualcomm.com,
Steven Rostedt <rostedt@goodmis.org>,
Masami Hiramatsu <mhiramat@kernel.org>,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
chandana.chiluveru@oss.qualcomm.com,
mukesh.savaliya@oss.qualcomm.com, linux-kernel@vger.kernel.org,
linux-trace-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, dmaengine@vger.kernel.org
Subject: Re: [PATCH v2 3/3] dmaengine: qcom: gpi: Convert dev_dbg() calls to tracepoints
Date: Wed, 9 Sep 2026 15:58:48 -0500 [thread overview]
Message-ID: <aqHIiBMVmuBKx6lM@SMW015318> (raw)
In-Reply-To: <20260909-add-trace-support-gpio-v2-3-01f81739bb88@oss.qualcomm.com>
On Wed, Sep 09, 2026 at 10:39:43AM +0530, Praveen Talari wrote:
> Replace the remaining dev_dbg() based debug logging in the GPI DMA
> driver with the qcom_gpi tracepoints, providing structured runtime
> visibility into GPI DMA behavior without requiring invasive debug
> patches. dev_err() calls are left untouched.
>
> Tracepoints are added at the same points as the dev_dbg() calls they
> replace: channel/event command dispatch in gpi_send_cmd(), error and
> top-level interrupt status in gpi_process_gen_err_irq() and
> gpi_handle_irq(), event/channel control state transitions in the IRQ
> handler and gpi_process_ch_ctrl_irq(), completion event handling
> (including the no-pending-descriptor and transfer result paths) in
> gpi_process_imed_data_event(), gpi_process_xfer_compl_event() and
> gpi_process_events(), ring allocation details in gpi_alloc_ring(),
> already-in-state checks in gpi_pause()/gpi_resume(), TRE contents in
> gpi_create_i2c_tre()/gpi_create_spi_tre(), and TRE queuing in
> gpi_issue_pending().
needn't this paragraph. The first paragraph is clear enough.
Frank
>
> Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
> ---
> drivers/dma/qcom/gpi.c | 58 ++++++++++++++------------------------------------
> 1 file changed, 16 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
> index b09354a73b46..8e7d25a46147 100644
> --- a/drivers/dma/qcom/gpi.c
> +++ b/drivers/dma/qcom/gpi.c
> @@ -684,8 +684,6 @@ static int gpi_send_cmd(struct gpii *gpii, struct gchan *gchan,
> if (IS_CHAN_CMD(gpi_cmd))
> chid = gchan->chid;
>
> - dev_dbg(gpii->gpi_dev->dev,
> - "sending cmd: %s:%u\n", TO_GPI_CMD_STR(gpi_cmd), chid);
> trace_gpi_send_cmd(gpii->gpi_dev->dev, chid, gpi_cmd, TO_GPI_CMD_STR(gpi_cmd));
>
> /* send opcode and wait for completion */
> @@ -797,7 +795,7 @@ static void gpi_process_gen_err_irq(struct gpii *gpii)
> u32 irq_stts = gpi_read_reg(gpii, gpii->regs + offset);
>
> /* clear the status */
> - dev_dbg(gpii->gpi_dev->dev, "irq_stts:0x%x\n", irq_stts);
> + trace_gpi_gen_err_irq(gpii->gpi_dev->dev, gpii_id, irq_stts);
>
> /* Clear the register */
> offset = GPII_n_CNTXT_GPII_IRQ_CLR_OFFS(gpii_id);
> @@ -866,8 +864,6 @@ static irqreturn_t gpi_handle_irq(int irq, void *data)
> u32 ev_state;
> u32 ev_ch_irq;
>
> - dev_dbg(gpii->gpi_dev->dev,
> - "processing EV CTRL interrupt\n");
> offset = GPII_n_CNTXT_SRC_EV_CH_IRQ_OFFS(gpii_id);
> ev_ch_irq = gpi_read_reg(gpii, gpii->regs + offset);
>
> @@ -887,15 +883,14 @@ static irqreturn_t gpi_handle_irq(int irq, void *data)
> ev_state = DEFAULT_EV_CH_STATE;
>
> gpii->ev_state = ev_state;
> - dev_dbg(gpii->gpi_dev->dev, "setting EV state to %s\n",
> - TO_GPI_EV_STATE_STR(gpii->ev_state));
> + trace_gpi_ev_ctrl_irq(gpii->gpi_dev->dev, gpii_id, ev_ch_irq,
> + gpii->ev_state);
> complete_all(&gpii->cmd_completion);
> type &= ~(GPII_n_CNTXT_TYPE_IRQ_MSK_EV_CTRL);
> }
>
> /* channel control irq */
> if (type & GPII_n_CNTXT_TYPE_IRQ_MSK_CH_CTRL) {
> - dev_dbg(gpii->gpi_dev->dev, "process CH CTRL interrupts\n");
> gpi_process_ch_ctrl_irq(gpii);
> type &= ~(GPII_n_CNTXT_TYPE_IRQ_MSK_CH_CTRL);
> }
> @@ -945,17 +940,10 @@ static void gpi_process_imed_data_event(struct gchan *gchan,
> struct gpi_tre *gpi_tre;
>
> spin_unlock_irqrestore(&gchan->vc.lock, flags);
> - dev_dbg(gpii->gpi_dev->dev, "event without a pending descriptor!\n");
> gpi_ere = (struct gpi_ere *)imed_event;
> - dev_dbg(gpii->gpi_dev->dev,
> - "Event: %08x %08x %08x %08x\n",
> - gpi_ere->dword[0], gpi_ere->dword[1],
> - gpi_ere->dword[2], gpi_ere->dword[3]);
> gpi_tre = tre;
> - dev_dbg(gpii->gpi_dev->dev,
> - "Pending TRE: %08x %08x %08x %08x\n",
> - gpi_tre->dword[0], gpi_tre->dword[1],
> - gpi_tre->dword[2], gpi_tre->dword[3]);
> + trace_gpi_ev_no_desc(gpii->gpi_dev->dev, imed_event->chid,
> + gpi_ere->dword, gpi_tre->dword);
> return;
> }
> gpi_desc = to_gpi_desc(vd);
> @@ -1064,11 +1052,10 @@ static void gpi_process_xfer_compl_event(struct gchan *gchan,
> dev_err(gpii->gpi_dev->dev, "Error in Transaction\n");
> result.result = DMA_TRANS_ABORTED;
> } else {
> - dev_dbg(gpii->gpi_dev->dev, "Transaction Success\n");
> result.result = DMA_TRANS_NOERROR;
> }
> result.residue = gpi_desc->len - compl_event->length;
> - dev_dbg(gpii->gpi_dev->dev, "Residue %d\n", result.residue);
> + trace_gpi_xfer_result(gpii->gpi_dev->dev, chid, result.result, result.residue);
>
> dma_cookie_complete(&vd->tx);
> dmaengine_desc_get_callback_invoke(&vd->tx, &result);
> @@ -1100,11 +1087,8 @@ static void gpi_process_events(struct gpii *gpii)
> chid = gpi_event->xfer_compl_event.chid;
> type = gpi_event->xfer_compl_event.type;
>
> - dev_dbg(gpii->gpi_dev->dev,
> - "Event: CHID:%u, type:%x %08x %08x %08x %08x\n",
> - chid, type, gpi_event->gpi_ere.dword[0],
> - gpi_event->gpi_ere.dword[1], gpi_event->gpi_ere.dword[2],
> - gpi_event->gpi_ere.dword[3]);
> + trace_gpi_process_event(gpii->gpi_dev->dev, chid, type,
> + gpi_event->gpi_ere.dword);
>
> switch (type) {
> case XFER_COMPLETE_EV_TYPE:
> @@ -1113,7 +1097,6 @@ static void gpi_process_events(struct gpii *gpii)
> &gpi_event->xfer_compl_event);
> break;
> case STALE_EV_TYPE:
> - dev_dbg(gpii->gpi_dev->dev, "stale event, not processing\n");
> break;
> case IMMEDIATE_DATA_EV_TYPE:
> gchan = &gpii->gchan[chid];
> @@ -1121,11 +1104,8 @@ static void gpi_process_events(struct gpii *gpii)
> &gpi_event->immediate_data_event);
> break;
> case QUP_NOTIF_EV_TYPE:
> - dev_dbg(gpii->gpi_dev->dev, "QUP_NOTIF_EV_TYPE\n");
> break;
> default:
> - dev_dbg(gpii->gpi_dev->dev,
> - "not supported event type:0x%x\n", type);
> }
> gpi_ring_recycle_ev_element(ev_ring);
> }
> @@ -1409,10 +1389,8 @@ static int gpi_alloc_ring(struct gpi_ring *ring, u32 elements,
> bit++;
> len = 1 << bit;
> ring->alloc_size = (len + (len - 1));
> - dev_dbg(gpii->gpi_dev->dev,
> - "#el:%u el_size:%u len:%u actual_len:%llu alloc_size:%zu\n",
> - elements, el_size, (elements * el_size), len,
> - ring->alloc_size);
> + trace_gpi_alloc_ring(gpii->gpi_dev->dev, elements, el_size,
> + (elements * el_size), len, ring->alloc_size);
>
> ring->pre_aligned = dma_alloc_coherent(gpii->gpi_dev->dev,
> ring->alloc_size,
> @@ -1437,10 +1415,8 @@ static int gpi_alloc_ring(struct gpi_ring *ring, u32 elements,
> /* update to other cores */
> smp_wmb();
>
> - dev_dbg(gpii->gpi_dev->dev,
> - "phy_pre:%pad phy_alig:%pa len:%u el_size:%u elements:%u\n",
> - &ring->dma_handle, &ring->phys_addr, ring->len,
> - ring->el_size, ring->elements);
> + trace_gpi_ring_info(gpii->gpi_dev->dev, ring->dma_handle, ring->phys_addr,
> + ring->len, ring->el_size, ring->elements);
>
> return 0;
> }
> @@ -1542,7 +1518,7 @@ static int gpi_pause(struct dma_chan *chan)
> * client needs to call pause only once
> */
> if (gpii->pm_state == PAUSE_STATE) {
> - dev_dbg(gpii->gpi_dev->dev, "channel is already paused\n");
> + trace_gpi_already_state(gpii->gpi_dev->dev, gpii->gpii_id, gpii->pm_state);
> mutex_unlock(&gpii->ctrl_lock);
> return 0;
> }
> @@ -1578,7 +1554,7 @@ static int gpi_resume(struct dma_chan *chan)
>
> mutex_lock(&gpii->ctrl_lock);
> if (gpii->pm_state == ACTIVE_STATE) {
> - dev_dbg(gpii->gpi_dev->dev, "channel is already active\n");
> + trace_gpi_already_state(gpii->gpi_dev->dev, gpii->gpii_id, gpii->pm_state);
> mutex_unlock(&gpii->ctrl_lock);
> return 0;
> }
> @@ -1703,8 +1679,7 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc,
> }
>
> for (i = 0; i < tre_idx; i++)
> - dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0],
> - desc->tre[i].dword[1], desc->tre[i].dword[2], desc->tre[i].dword[3]);
> + trace_gpi_tre(dev, chan->chid, i, desc->tre[i].dword);
>
> return tre_idx;
> }
> @@ -1797,8 +1772,7 @@ static int gpi_create_spi_tre(struct gchan *chan, struct gpi_desc *desc,
> TRE_FLAGS_IEOT);
>
> for (i = 0; i < tre_idx; i++)
> - dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0],
> - desc->tre[i].dword[1], desc->tre[i].dword[2], desc->tre[i].dword[3]);
> + trace_gpi_tre(dev, chan->chid, i, desc->tre[i].dword);
>
> return tre_idx;
> }
>
> --
> 2.34.1
>
prev parent reply other threads:[~2026-09-09 20:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-09 5:09 [PATCH v2 0/3] dmaengine: qcom: gpi: Add trace event support Praveen Talari
2026-09-09 5:09 ` [PATCH v2 1/3] dmaengine: qcom: gpi: trace: Add trace events header for Qualcomm GPI DMA Praveen Talari
2026-09-09 20:56 ` Frank Li
2026-09-09 5:09 ` [PATCH v2 2/3] dmaengine: qcom: gpi: Add trace event support Praveen Talari
2026-09-09 5:23 ` sashiko-bot
2026-09-09 5:09 ` [PATCH v2 3/3] dmaengine: qcom: gpi: Convert dev_dbg() calls to tracepoints Praveen Talari
2026-09-09 5:22 ` sashiko-bot
2026-09-09 20:58 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqHIiBMVmuBKx6lM@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=chandana.chiluveru@oss.qualcomm.com \
--cc=dmaengine@vger.kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-trace-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=mhiramat@kernel.org \
--cc=mukesh.savaliya@oss.qualcomm.com \
--cc=praveen.talari@oss.qualcomm.com \
--cc=rostedt@goodmis.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox