From: Jeff Dike <jdike@addtoit.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org,
user-mode-linux-devel@lists.sourceforge.net
Subject: [uml-devel] [PATCH 9/10] UML - Big memory fixes
Date: Sun, 30 Oct 2005 23:39:42 -0500 [thread overview]
Message-ID: <200510310439.j9V4dgqP000878@ccure.user-mode-linux.org> (raw)
A number of fixes to improve behavior when large physical memory sizes
are specified:
libc files need -D_FILE_OFFSET_BITS=64 because there are unavoidable
uses of non-64 interfaces in libc
some %d need to be %u
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Index: linux-2.6.14/arch/um/Makefile
===================================================================
--- linux-2.6.14.orig/arch/um/Makefile 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.14/arch/um/Makefile 2005-10-30 19:29:03.000000000 -0500
@@ -60,7 +60,7 @@ AFLAGS += $(ARCH_INCLUDE)
USER_CFLAGS := $(patsubst -I%,,$(CFLAGS))
USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \
- $(MODE_INCLUDE)
+ $(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64
# -Derrno=kernel_errno - This turns all kernel references to errno into
# kernel_errno to separate them from the libc errno. This allows -fno-common
Index: linux-2.6.14/arch/um/include/mem_user.h
===================================================================
--- linux-2.6.14.orig/arch/um/include/mem_user.h 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.14/arch/um/include/mem_user.h 2005-10-30 19:29:04.000000000 -0500
@@ -57,7 +57,7 @@ extern int init_maps(unsigned long physm
unsigned long highmem);
extern unsigned long get_vm(unsigned long len);
extern void setup_physmem(unsigned long start, unsigned long usable,
- unsigned long len, unsigned long highmem);
+ unsigned long len, unsigned long long highmem);
extern void add_iomem(char *name, int fd, unsigned long size);
extern unsigned long phys_offset(unsigned long phys);
extern void unmap_physmem(void);
Index: linux-2.6.14/arch/um/include/os.h
===================================================================
--- linux-2.6.14.orig/arch/um/include/os.h 2005-10-30 19:27:49.000000000 -0500
+++ linux-2.6.14/arch/um/include/os.h 2005-10-30 19:29:04.000000000 -0500
@@ -167,7 +167,7 @@ extern int can_do_skas(void);
#endif
/* mem.c */
-extern int create_mem_file(unsigned long len);
+extern int create_mem_file(unsigned long long len);
/* process.c */
extern unsigned long os_process_pc(int pid);
Index: linux-2.6.14/arch/um/kernel/mem.c
===================================================================
--- linux-2.6.14.orig/arch/um/kernel/mem.c 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.14/arch/um/kernel/mem.c 2005-10-30 19:29:04.000000000 -0500
@@ -235,7 +235,7 @@ void paging_init(void)
for(i=0;i<sizeof(zones_size)/sizeof(zones_size[0]);i++)
zones_size[i] = 0;
zones_size[0] = (end_iomem >> PAGE_SHIFT) - (uml_physmem >> PAGE_SHIFT);
- zones_size[2] = highmem >> PAGE_SHIFT;
+ zones_size[3] = highmem >> PAGE_SHIFT;
free_area_init(zones_size);
/*
Index: linux-2.6.14/arch/um/kernel/physmem.c
===================================================================
--- linux-2.6.14.orig/arch/um/kernel/physmem.c 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.14/arch/um/kernel/physmem.c 2005-10-30 19:29:04.000000000 -0500
@@ -246,7 +246,7 @@ int is_remapped(void *virt)
/* Changed during early boot */
unsigned long high_physmem;
-extern unsigned long physmem_size;
+extern unsigned long long physmem_size;
int init_maps(unsigned long physmem, unsigned long iomem, unsigned long highmem)
{
@@ -321,7 +321,7 @@ void map_memory(unsigned long virt, unsi
extern int __syscall_stub_start, __binary_start;
void setup_physmem(unsigned long start, unsigned long reserve_end,
- unsigned long len, unsigned long highmem)
+ unsigned long len, unsigned long long highmem)
{
unsigned long reserve = reserve_end - start;
int pfn = PFN_UP(__pa(reserve_end));
Index: linux-2.6.14/arch/um/kernel/um_arch.c
===================================================================
--- linux-2.6.14.orig/arch/um/kernel/um_arch.c 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.14/arch/um/kernel/um_arch.c 2005-10-30 19:29:04.000000000 -0500
@@ -137,7 +137,7 @@ static char *argv1_end = NULL;
/* Set in early boot */
static int have_root __initdata = 0;
-long physmem_size = 32 * 1024 * 1024;
+long long physmem_size = 32 * 1024 * 1024;
void set_cmdline(char *cmd)
{
@@ -402,7 +402,7 @@ int linux_main(int argc, char **argv)
#ifndef CONFIG_HIGHMEM
highmem = 0;
printf("CONFIG_HIGHMEM not enabled - physical memory shrunk "
- "to %ld bytes\n", physmem_size);
+ "to %lu bytes\n", physmem_size);
#endif
}
@@ -414,8 +414,8 @@ int linux_main(int argc, char **argv)
setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
if(init_maps(physmem_size, iomem_size, highmem)){
- printf("Failed to allocate mem_map for %ld bytes of physical "
- "memory and %ld bytes of highmem\n", physmem_size,
+ printf("Failed to allocate mem_map for %lu bytes of physical "
+ "memory and %lu bytes of highmem\n", physmem_size,
highmem);
exit(1);
}
@@ -426,7 +426,7 @@ int linux_main(int argc, char **argv)
end_vm = start_vm + virtmem_size;
if(virtmem_size < physmem_size)
- printf("Kernel virtual memory size shrunk to %ld bytes\n",
+ printf("Kernel virtual memory size shrunk to %lu bytes\n",
virtmem_size);
uml_postsetup();
Index: linux-2.6.14/arch/um/os-Linux/mem.c
===================================================================
--- linux-2.6.14.orig/arch/um/os-Linux/mem.c 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.14/arch/um/os-Linux/mem.c 2005-10-30 19:29:05.000000000 -0500
@@ -88,7 +88,7 @@ int make_tempfile(const char *template,
* This proc is used in start_up.c
* So it isn't 'static'.
*/
-int create_tmp_file(unsigned long len)
+int create_tmp_file(unsigned long long len)
{
int fd, err;
char zero;
@@ -121,7 +121,7 @@ int create_tmp_file(unsigned long len)
return(fd);
}
-static int create_anon_file(unsigned long len)
+static int create_anon_file(unsigned long long len)
{
void *addr;
int fd;
@@ -144,7 +144,7 @@ static int create_anon_file(unsigned lon
extern int have_devanon;
-int create_mem_file(unsigned long len)
+int create_mem_file(unsigned long long len)
{
int err, fd;
Index: linux-2.6.14/arch/um/os-Linux/start_up.c
===================================================================
--- linux-2.6.14.orig/arch/um/os-Linux/start_up.c 2005-10-30 19:28:48.000000000 -0500
+++ linux-2.6.14/arch/um/os-Linux/start_up.c 2005-10-30 19:29:05.000000000 -0500
@@ -296,7 +296,7 @@ static void __init check_ptrace(void)
check_sysemu();
}
-extern int create_tmp_file(unsigned long len);
+extern int create_tmp_file(unsigned long long len);
static void check_tmpexec(void)
{
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
next reply other threads:[~2005-10-31 3:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-31 4:39 Jeff Dike [this message]
2005-11-01 15:11 ` [uml-devel] [PATCH 9/10] UML - Big memory fixes Blaisorblade
2005-11-01 17:06 ` Jeff Dike
2005-11-01 20:37 ` [uml-devel] [PATCH] uml: fix hardcoded ZONE_* constants in zone setup Paolo 'Blaisorblade' Giarrusso
2005-11-04 22:46 ` [uml-devel] " Andrew Morton
2005-11-04 23:21 ` Blaisorblade
2005-11-04 23:26 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200510310439.j9V4dgqP000878@ccure.user-mode-linux.org \
--to=jdike@addtoit.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox