From: Jeff Dike <jdike@addtoit.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org,
user-mode-linux-devel@lists.sourceforge.net,
Gennady Sharapov <Gennady.V.Sharapov@intel.com>
Subject: [uml-devel] [PATCH 2/4] UML - Move libc-dependent code from trap_user.c
Date: Thu, 05 Jan 2006 17:53:48 -0500 [thread overview]
Message-ID: <200601052253.k05MrmQT010767@ccure.user-mode-linux.org> (raw)
From: Gennady Sharapov <Gennady.V.Sharapov@intel.com>
The serial UML OS-abstraction layer patch (um/kernel dir).
This moves all systemcalls from trap_user.c file under os-Linux dir
Signed-off-by: Gennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Index: linux-2.6.15/arch/um/include/kern_util.h
===================================================================
--- linux-2.6.15.orig/arch/um/include/kern_util.h 2006-01-04 16:00:20.000000000 -0500
+++ linux-2.6.15/arch/um/include/kern_util.h 2006-01-04 16:52:17.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -10,6 +10,19 @@
#include "sysdep/ptrace.h"
#include "sysdep/faultinfo.h"
+typedef void (*kern_hndl)(int, union uml_pt_regs *);
+
+struct kern_handlers {
+ kern_hndl relay_signal;
+ kern_hndl winch;
+ kern_hndl bus_handler;
+ kern_hndl page_fault;
+ kern_hndl sigio_handler;
+ kern_hndl timer_handler;
+};
+
+extern struct kern_handlers handlinfo_kern;
+
extern int ncpus;
extern char *linux_prog;
extern char *gdb_init;
@@ -109,6 +122,8 @@ extern void arch_switch(void);
extern void free_irq(unsigned int, void *);
extern int um_in_interrupt(void);
extern int cpu(void);
+extern void segv_handler(int sig, union uml_pt_regs *regs);
+extern void sigio_handler(int sig, union uml_pt_regs *regs);
#endif
Index: linux-2.6.15/arch/um/include/os.h
===================================================================
--- linux-2.6.15.orig/arch/um/include/os.h 2006-01-04 16:00:20.000000000 -0500
+++ linux-2.6.15/arch/um/include/os.h 2006-01-04 16:52:17.000000000 -0500
@@ -9,6 +9,8 @@
#include "uml-config.h"
#include "asm/types.h"
#include "../os/include/file.h"
+#include "sysdep/ptrace.h"
+#include "kern_util.h"
#define OS_TYPE_FILE 1
#define OS_TYPE_DIR 2
@@ -229,4 +231,8 @@ extern void unblock_signals(void);
extern int get_signals(void);
extern int set_signals(int enable);
+/* trap.c */
+extern void os_fill_handlinfo(struct kern_handlers h);
+extern void do_longjmp(void *p, int val);
+
#endif
Index: linux-2.6.15/arch/um/include/user_util.h
===================================================================
--- linux-2.6.15.orig/arch/um/include/user_util.h 2006-01-04 15:06:44.000000000 -0500
+++ linux-2.6.15/arch/um/include/user_util.h 2006-01-04 16:52:17.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -23,12 +23,7 @@ struct cpu_task {
extern struct cpu_task cpu_tasks[];
-struct signal_info {
- void (*handler)(int, union uml_pt_regs *);
- int is_irq;
-};
-
-extern struct signal_info sig_info[];
+extern void (*sig_info[])(int, union uml_pt_regs *);
extern unsigned long low_physmem;
extern unsigned long high_physmem;
@@ -64,7 +59,6 @@ extern void setup_machinename(char *mach
extern void setup_hostinfo(void);
extern void do_exec(int old_pid, int new_pid);
extern void tracer_panic(char *msg, ...);
-extern void do_longjmp(void *p, int val);
extern int detach(int pid, int sig);
extern int attach(int pid);
extern void kill_child_dead(int pid);
Index: linux-2.6.15/arch/um/kernel/skas/trap_user.c
===================================================================
--- linux-2.6.15.orig/arch/um/kernel/skas/trap_user.c 2006-01-04 16:00:20.000000000 -0500
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-#include <errno.h>
-#include "user_util.h"
-#include "kern_util.h"
-#include "task.h"
-#include "sigcontext.h"
-#include "skas.h"
-#include "ptrace_user.h"
-#include "sysdep/ptrace.h"
-#include "sysdep/ptrace_user.h"
-#include "os.h"
-
-void sig_handler_common_skas(int sig, void *sc_ptr)
-{
- struct sigcontext *sc = sc_ptr;
- struct skas_regs *r;
- struct signal_info *info;
- int save_errno = errno;
- int save_user;
-
- /* This is done because to allow SIGSEGV to be delivered inside a SEGV
- * handler. This can happen in copy_user, and if SEGV is disabled,
- * the process will die.
- * XXX Figure out why this is better than SA_NODEFER
- */
- if(sig == SIGSEGV)
- change_sig(SIGSEGV, 1);
-
- r = &TASK_REGS(get_current())->skas;
- save_user = r->is_user;
- r->is_user = 0;
- if ( sig == SIGFPE || sig == SIGSEGV ||
- sig == SIGBUS || sig == SIGILL ||
- sig == SIGTRAP ) {
- GET_FAULTINFO_FROM_SC(r->faultinfo, sc);
- }
-
- change_sig(SIGUSR1, 1);
- info = &sig_info[sig];
- if(!info->is_irq) unblock_signals();
-
- (*info->handler)(sig, (union uml_pt_regs *) r);
-
- errno = save_errno;
- r->is_user = save_user;
-}
-
-extern int ptrace_faultinfo;
-
-void user_signal(int sig, union uml_pt_regs *regs, int pid)
-{
- struct signal_info *info;
- int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
- (sig == SIGILL) || (sig == SIGTRAP));
-
- if (segv)
- get_skas_faultinfo(pid, ®s->skas.faultinfo);
- info = &sig_info[sig];
- (*info->handler)(sig, regs);
-
- unblock_signals();
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.15/arch/um/kernel/trap_kern.c
===================================================================
--- linux-2.6.15.orig/arch/um/kernel/trap_kern.c 2006-01-03 17:39:46.000000000 -0500
+++ linux-2.6.15/arch/um/kernel/trap_kern.c 2006-01-04 16:52:17.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -29,6 +29,7 @@
#ifdef CONFIG_MODE_SKAS
#include "skas.h"
#endif
+#include "os.h"
/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
int handle_page_fault(unsigned long address, unsigned long ip,
@@ -125,6 +126,14 @@ out_of_memory:
goto out;
}
+struct kern_handlers handlinfo_kern = {
+ .relay_signal = relay_signal,
+ .winch = winch,
+ .bus_handler = relay_signal,
+ .page_fault = segv_handler,
+ .sigio_handler = sigio_handler,
+ .timer_handler = timer_handler
+};
/*
* We give a *copy* of the faultinfo in the regs to segv.
* This must be done, since nesting SEGVs could overwrite
Index: linux-2.6.15/arch/um/kernel/trap_user.c
===================================================================
--- linux-2.6.15.orig/arch/um/kernel/trap_user.c 2006-01-04 16:00:20.000000000 -0500
+++ linux-2.6.15/arch/um/kernel/trap_user.c 2006-01-04 16:52:17.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -25,20 +25,6 @@
#include "user_util.h"
#include "os.h"
-void kill_child_dead(int pid)
-{
- kill(pid, SIGKILL);
- kill(pid, SIGCONT);
- do {
- int n;
- CATCH_EINTR(n = waitpid(pid, NULL, 0));
- if (n > 0)
- kill(pid, SIGCONT);
- else
- break;
- } while(1);
-}
-
void segv_handler(int sig, union uml_pt_regs *regs)
{
struct faultinfo * fi = UPT_FAULTINFO(regs);
@@ -55,43 +41,18 @@ void usr2_handler(int sig, union uml_pt_
CHOOSE_MODE(syscall_handler_tt(sig, regs), (void) 0);
}
-struct signal_info sig_info[] = {
- [ SIGTRAP ] { .handler = relay_signal,
- .is_irq = 0 },
- [ SIGFPE ] { .handler = relay_signal,
- .is_irq = 0 },
- [ SIGILL ] { .handler = relay_signal,
- .is_irq = 0 },
- [ SIGWINCH ] { .handler = winch,
- .is_irq = 1 },
- [ SIGBUS ] { .handler = bus_handler,
- .is_irq = 0 },
- [ SIGSEGV] { .handler = segv_handler,
- .is_irq = 0 },
- [ SIGIO ] { .handler = sigio_handler,
- .is_irq = 1 },
- [ SIGVTALRM ] { .handler = timer_handler,
- .is_irq = 1 },
- [ SIGALRM ] { .handler = timer_handler,
- .is_irq = 1 },
- [ SIGUSR2 ] { .handler = usr2_handler,
- .is_irq = 0 },
-};
+void (*sig_info[NSIG])(int, union uml_pt_regs *);
-void do_longjmp(void *b, int val)
+void os_fill_handlinfo(struct kern_handlers h)
{
- sigjmp_buf *buf = b;
-
- siglongjmp(*buf, val);
+ sig_info[SIGTRAP] = h.relay_signal;
+ sig_info[SIGFPE] = h.relay_signal;
+ sig_info[SIGILL] = h.relay_signal;
+ sig_info[SIGWINCH] = h.winch;
+ sig_info[SIGBUS] = h.bus_handler;
+ sig_info[SIGSEGV] = h.page_fault;
+ sig_info[SIGIO] = h.sigio_handler;
+ sig_info[SIGVTALRM] = h.timer_handler;
+ sig_info[SIGALRM] = h.timer_handler;
+ sig_info[SIGUSR2] = usr2_handler;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.15/arch/um/kernel/tt/trap_user.c
===================================================================
--- linux-2.6.15.orig/arch/um/kernel/tt/trap_user.c 2006-01-04 16:00:21.000000000 -0500
+++ linux-2.6.15/arch/um/kernel/tt/trap_user.c 2006-01-04 16:52:17.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -18,8 +18,8 @@ void sig_handler_common_tt(int sig, void
{
struct sigcontext *sc = sc_ptr;
struct tt_regs save_regs, *r;
- struct signal_info *info;
int save_errno = errno, is_user;
+ void (*handler)(int, union uml_pt_regs *);
/* This is done because to allow SIGSEGV to be delivered inside a SEGV
* handler. This can happen in copy_user, and if SEGV is disabled,
@@ -40,10 +40,14 @@ void sig_handler_common_tt(int sig, void
if(sig != SIGUSR2)
r->syscall = -1;
- info = &sig_info[sig];
- if(!info->is_irq) unblock_signals();
+ handler = sig_info[sig];
+
+ /* unblock SIGALRM, SIGVTALRM, SIGIO if sig isn't IRQ signal */
+ if (sig != SIGIO && sig != SIGWINCH &&
+ sig != SIGVTALRM && sig != SIGALRM)
+ unblock_signals();
- (*info->handler)(sig, (union uml_pt_regs *) r);
+ handler(sig, (union uml_pt_regs *) r);
if(is_user){
interrupt_end();
Index: linux-2.6.15/arch/um/kernel/um_arch.c
===================================================================
--- linux-2.6.15.orig/arch/um/kernel/um_arch.c 2006-01-04 15:06:44.000000000 -0500
+++ linux-2.6.15/arch/um/kernel/um_arch.c 2006-01-04 16:52:17.000000000 -0500
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -363,6 +363,11 @@ int linux_main(int argc, char **argv)
uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0,
&host_task_size, &task_size);
+ /*
+ * Setting up handlers to 'sig_info' struct
+ */
+ os_fill_handlinfo(handlinfo_kern);
+
brk_start = (unsigned long) sbrk(0);
CHOOSE_MODE_PROC(before_mem_tt, before_mem_skas, brk_start);
/* Increase physical memory size for exec-shield users
Index: linux-2.6.15/arch/um/os-Linux/Makefile
===================================================================
--- linux-2.6.15.orig/arch/um/os-Linux/Makefile 2006-01-04 15:03:49.000000000 -0500
+++ linux-2.6.15/arch/um/os-Linux/Makefile 2006-01-04 16:52:17.000000000 -0500
@@ -4,11 +4,13 @@
#
obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
- start_up.o time.o tt.o tty.o uaccess.o umid.o user_syms.o drivers/ \
- sys-$(SUBARCH)/
+ start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o user_syms.o \
+ drivers/ sys-$(SUBARCH)/
+
+obj-$(CONFIG_MODE_SKAS) += skas/
USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
- start_up.o time.o tt.o tty.o uaccess.o umid.o
+ start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o
elf_aux.o: $(ARCH_DIR)/kernel-offsets.h
CFLAGS_elf_aux.o += -I$(objtree)/arch/um
Index: linux-2.6.15/arch/um/os-Linux/trap.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.15/arch/um/os-Linux/trap.c 2006-01-04 16:52:17.000000000 -0500
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include <setjmp.h>
+#include <signal.h>
+#include "kern_util.h"
+#include "user_util.h"
+#include "os.h"
+
+void do_longjmp(void *b, int val)
+{
+ sigjmp_buf *buf = b;
+
+ siglongjmp(*buf, val);
+}
Index: linux-2.6.15/arch/um/os-Linux/tt.c
===================================================================
--- linux-2.6.15.orig/arch/um/os-Linux/tt.c 2006-01-04 16:00:21.000000000 -0500
+++ linux-2.6.15/arch/um/os-Linux/tt.c 2006-01-04 16:52:17.000000000 -0500
@@ -49,6 +49,20 @@ int protect_memory(unsigned long addr, u
return(0);
}
+void kill_child_dead(int pid)
+{
+ kill(pid, SIGKILL);
+ kill(pid, SIGCONT);
+ do {
+ int n;
+ CATCH_EINTR(n = waitpid(pid, NULL, 0));
+ if (n > 0)
+ kill(pid, SIGCONT);
+ else
+ break;
+ } while(1);
+}
+
/*
*-------------------------
* only for tt mode (will be deleted in future...)
Index: linux-2.6.15/arch/um/os-Linux/skas/Makefile
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.15/arch/um/os-Linux/skas/Makefile 2006-01-04 16:52:17.000000000 -0500
@@ -0,0 +1,10 @@
+#
+# Copyright (C) 2002 - 2004 Jeff Dike (jdike@addtoit.com)
+# Licensed under the GPL
+#
+
+obj-y := trap.o
+
+USER_OBJS := trap.o
+
+include arch/um/scripts/Makefile.rules
Index: linux-2.6.15/arch/um/os-Linux/skas/trap.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.15/arch/um/os-Linux/skas/trap.c 2006-01-04 16:52:17.000000000 -0500
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Licensed under the GPL
+ */
+
+#include <signal.h>
+#include <errno.h>
+#include "user_util.h"
+#include "kern_util.h"
+#include "task.h"
+#include "sigcontext.h"
+#include "skas.h"
+#include "ptrace_user.h"
+#include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "os.h"
+
+void sig_handler_common_skas(int sig, void *sc_ptr)
+{
+ struct sigcontext *sc = sc_ptr;
+ struct skas_regs *r;
+ void (*handler)(int, union uml_pt_regs *);
+ int save_errno = errno;
+ int save_user;
+
+ /* This is done because to allow SIGSEGV to be delivered inside a SEGV
+ * handler. This can happen in copy_user, and if SEGV is disabled,
+ * the process will die.
+ * XXX Figure out why this is better than SA_NODEFER
+ */
+ if(sig == SIGSEGV)
+ change_sig(SIGSEGV, 1);
+
+ r = &TASK_REGS(get_current())->skas;
+ save_user = r->is_user;
+ r->is_user = 0;
+ if ( sig == SIGFPE || sig == SIGSEGV ||
+ sig == SIGBUS || sig == SIGILL ||
+ sig == SIGTRAP ) {
+ GET_FAULTINFO_FROM_SC(r->faultinfo, sc);
+ }
+
+ change_sig(SIGUSR1, 1);
+
+ handler = sig_info[sig];
+
+ /* unblock SIGALRM, SIGVTALRM, SIGIO if sig isn't IRQ signal */
+ if (sig != SIGIO && sig != SIGWINCH &&
+ sig != SIGVTALRM && sig != SIGALRM)
+ unblock_signals();
+
+ handler(sig, (union uml_pt_regs *) r);
+
+ errno = save_errno;
+ r->is_user = save_user;
+}
+
+extern int ptrace_faultinfo;
+
+void user_signal(int sig, union uml_pt_regs *regs, int pid)
+{
+ void (*handler)(int, union uml_pt_regs *);
+ int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
+ (sig == SIGILL) || (sig == SIGTRAP));
+
+ if (segv)
+ get_skas_faultinfo(pid, ®s->skas.faultinfo);
+
+ handler = sig_info[sig];
+ handler(sig, (union uml_pt_regs *) regs);
+
+ unblock_signals();
+}
Index: linux-2.6.15/arch/um/kernel/skas/Makefile
===================================================================
--- linux-2.6.15.orig/arch/um/kernel/skas/Makefile 2005-10-28 12:58:12.000000000 -0400
+++ linux-2.6.15/arch/um/kernel/skas/Makefile 2006-01-04 16:52:17.000000000 -0500
@@ -4,7 +4,7 @@
#
obj-y := clone.o exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \
- syscall.o tlb.o trap_user.o uaccess.o
+ syscall.o tlb.o uaccess.o
USER_OBJS := process.o clone.o
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
reply other threads:[~2006-01-05 22:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200601052253.k05MrmQT010767@ccure.user-mode-linux.org \
--to=jdike@addtoit.com \
--cc=Gennady.V.Sharapov@intel.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox