From: Jeff Dike <jdike@addtoit.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org,
user-mode-linux-devel@lists.sourceforge.net,
Gennady Sharapov <Gennady.V.Sharapov@intel.com>
Subject: [uml-devel] [PATCH 2/11] UML - Move libc-dependent utility procedures
Date: Sun, 15 Jan 2006 16:39:36 -0500 [thread overview]
Message-ID: <200601152139.k0FLdapx027710@ccure.user-mode-linux.org> (raw)
From: Gennady Sharapov <Gennady.V.Sharapov@intel.com>
The serial UML OS-abstraction layer patch (um/kernel dir).
This moves all systemcalls from user_util.c file under os-Linux dir
Signed-off-by: Gennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Index: linux-2.6.15-mm/arch/um/drivers/fd.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/drivers/fd.c 2006-01-06 21:23:35.000000000 -0500
+++ linux-2.6.15-mm/arch/um/drivers/fd.c 2006-01-06 21:24:14.000000000 -0500
@@ -11,6 +11,7 @@
#include "user.h"
#include "user_util.h"
#include "chan_user.h"
+#include "os.h"
struct fd_chan {
int fd;
Index: linux-2.6.15-mm/arch/um/include/os.h
===================================================================
--- linux-2.6.15-mm.orig/arch/um/include/os.h 2006-01-06 21:24:14.000000000 -0500
+++ linux-2.6.15-mm/arch/um/include/os.h 2006-01-06 21:46:20.000000000 -0500
@@ -195,6 +195,8 @@ extern unsigned long long os_usecs(void)
/* tt.c
* for tt mode only (will be deleted in future...)
*/
+extern void stop(void);
+extern int wait_for_stop(int pid, int sig, int cont_type, void *relay);
extern int protect_memory(unsigned long addr, unsigned long len,
int r, int w, int x, int must_succeed);
extern void forward_pending_sigio(int target);
@@ -235,4 +237,12 @@ extern int set_signals(int enable);
extern void os_fill_handlinfo(struct kern_handlers h);
extern void do_longjmp(void *p, int val);
+/* util.c */
+extern void stack_protections(unsigned long address);
+extern void task_protections(unsigned long address);
+extern int raw(int fd);
+extern void setup_machinename(char *machine_out);
+extern void setup_hostinfo(void);
+extern int setjmp_wrapper(void (*proc)(void *, void *), ...);
+
#endif
Index: linux-2.6.15-mm/arch/um/include/user_util.h
===================================================================
--- linux-2.6.15-mm.orig/arch/um/include/user_util.h 2006-01-06 21:24:14.000000000 -0500
+++ linux-2.6.15-mm/arch/um/include/user_util.h 2006-01-06 21:24:14.000000000 -0500
@@ -44,10 +44,6 @@ extern unsigned long brk_start;
extern int pty_output_sigio;
extern int pty_close_sigio;
-extern void stop(void);
-extern void stack_protections(unsigned long address);
-extern void task_protections(unsigned long address);
-extern int wait_for_stop(int pid, int sig, int cont_type, void *relay);
extern void *add_signal_handler(int sig, void (*handler)(int));
extern int linux_main(int argc, char **argv);
extern void set_cmdline(char *cmd);
@@ -55,8 +51,6 @@ extern void input_cb(void (*proc)(void *
extern int get_pty(void);
extern void *um_kmalloc(int size);
extern int switcheroo(int fd, int prot, void *from, void *to, int size);
-extern void setup_machinename(char *machine_out);
-extern void setup_hostinfo(void);
extern void do_exec(int old_pid, int new_pid);
extern void tracer_panic(char *msg, ...);
extern int detach(int pid, int sig);
@@ -70,18 +64,6 @@ extern int cpu_feature(char *what, char
extern int arch_handle_signal(int sig, union uml_pt_regs *regs);
extern int arch_fixup(unsigned long address, void *sc_ptr);
extern void arch_init_thread(void);
-extern int setjmp_wrapper(void (*proc)(void *, void *), ...);
extern int raw(int fd);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.15-mm/arch/um/kernel/Makefile
===================================================================
--- linux-2.6.15-mm.orig/arch/um/kernel/Makefile 2006-01-06 21:24:14.000000000 -0500
+++ linux-2.6.15-mm/arch/um/kernel/Makefile 2006-01-06 21:46:20.000000000 -0500
@@ -10,8 +10,7 @@ obj-y = config.o exec_kern.o exitcode.o
init_task.o irq.o irq_user.o ksyms.o mem.o physmem.o \
process_kern.o ptrace.o reboot.o resource.o sigio_user.o sigio_kern.o \
signal_kern.o smp.o syscall_kern.o sysrq.o time.o \
- time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o \
- user_util.o
+ time_kern.o tlb.o trap_kern.o uaccess.o um_arch.o umid.o
obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
obj-$(CONFIG_GPROF) += gprof_syms.o
@@ -24,7 +23,7 @@ obj-$(CONFIG_MODE_SKAS) += skas/
user-objs-$(CONFIG_TTY_LOG) += tty_log.o
-USER_OBJS := $(user-objs-y) config.o time.o tty_log.o user_util.o
+USER_OBJS := $(user-objs-y) config.o time.o tty_log.o
include arch/um/scripts/Makefile.rules
Index: linux-2.6.15-mm/arch/um/kernel/skas/uaccess.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/kernel/skas/uaccess.c 2006-01-06 21:23:35.000000000 -0500
+++ linux-2.6.15-mm/arch/um/kernel/skas/uaccess.c 2006-01-06 21:24:14.000000000 -0500
@@ -13,7 +13,7 @@
#include "asm/pgtable.h"
#include "asm/uaccess.h"
#include "kern_util.h"
-#include "user_util.h"
+#include "os.h"
extern void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
pte_t *pte_out);
Index: linux-2.6.15-mm/arch/um/kernel/tt/gdb.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/kernel/tt/gdb.c 2006-01-06 21:23:35.000000000 -0500
+++ linux-2.6.15-mm/arch/um/kernel/tt/gdb.c 2006-01-06 21:24:14.000000000 -0500
@@ -20,6 +20,7 @@
#include "user_util.h"
#include "tt.h"
#include "sysdep/thread.h"
+#include "os.h"
extern int debugger_pid;
extern int debugger_fd;
Index: linux-2.6.15-mm/arch/um/kernel/tt/ptproxy/ptrace.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/kernel/tt/ptproxy/ptrace.c 2006-01-06 21:23:35.000000000 -0500
+++ linux-2.6.15-mm/arch/um/kernel/tt/ptproxy/ptrace.c 2006-01-06 21:24:14.000000000 -0500
@@ -20,6 +20,7 @@ Jeff Dike (jdike@karaya.com) : Modified
#include "kern_util.h"
#include "ptrace_user.h"
#include "tt.h"
+#include "os.h"
long proxy_ptrace(struct debugger *debugger, int arg1, pid_t arg2,
long arg3, long arg4, pid_t child, int *ret)
Index: linux-2.6.15-mm/arch/um/kernel/tt/ptproxy/sysdep.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/kernel/tt/ptproxy/sysdep.c 2006-01-06 21:23:35.000000000 -0500
+++ linux-2.6.15-mm/arch/um/kernel/tt/ptproxy/sysdep.c 2006-01-06 21:24:14.000000000 -0500
@@ -15,6 +15,7 @@ terms and conditions.
#include "ptrace_user.h"
#include "user_util.h"
#include "user.h"
+#include "os.h"
int get_syscall(pid_t pid, long *arg1, long *arg2, long *arg3, long *arg4,
long *arg5)
Index: linux-2.6.15-mm/arch/um/kernel/user_util.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/kernel/user_util.c 2006-01-06 21:23:35.000000000 -0500
+++ /dev/null 1970-01-01 00:00:00.000000000 +0000
@@ -1,174 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <limits.h>
-#include <setjmp.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/param.h>
-#include <sys/time.h>
-#include "asm/types.h"
-#include <ctype.h>
-#include <signal.h>
-#include <wait.h>
-#include <errno.h>
-#include <stdarg.h>
-#include <sched.h>
-#include <termios.h>
-#include <string.h>
-#include "user_util.h"
-#include "kern_util.h"
-#include "user.h"
-#include "mem_user.h"
-#include "init.h"
-#include "ptrace_user.h"
-#include "uml-config.h"
-
-void stop(void)
-{
- while(1) sleep(1000000);
-}
-
-void stack_protections(unsigned long address)
-{
- int prot = PROT_READ | PROT_WRITE | PROT_EXEC;
-
- if(mprotect((void *) address, page_size(), prot) < 0)
- panic("protecting stack failed, errno = %d", errno);
-}
-
-void task_protections(unsigned long address)
-{
- unsigned long guard = address + page_size();
- unsigned long stack = guard + page_size();
- int prot = 0, pages;
-
-#ifdef notdef
- if(mprotect((void *) stack, page_size(), prot) < 0)
- panic("protecting guard page failed, errno = %d", errno);
-#endif
- pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER) - 2;
- prot = PROT_READ | PROT_WRITE | PROT_EXEC;
- if(mprotect((void *) stack, pages * page_size(), prot) < 0)
- panic("protecting stack failed, errno = %d", errno);
-}
-
-int wait_for_stop(int pid, int sig, int cont_type, void *relay)
-{
- sigset_t *relay_signals = relay;
- int status, ret;
-
- while(1){
- CATCH_EINTR(ret = waitpid(pid, &status, WUNTRACED));
- if((ret < 0) ||
- !WIFSTOPPED(status) || (WSTOPSIG(status) != sig)){
- if(ret < 0){
- printk("wait failed, errno = %d\n",
- errno);
- }
- else if(WIFEXITED(status))
- printk("process %d exited with status %d\n",
- pid, WEXITSTATUS(status));
- else if(WIFSIGNALED(status))
- printk("process %d exited with signal %d\n",
- pid, WTERMSIG(status));
- else if((WSTOPSIG(status) == SIGVTALRM) ||
- (WSTOPSIG(status) == SIGALRM) ||
- (WSTOPSIG(status) == SIGIO) ||
- (WSTOPSIG(status) == SIGPROF) ||
- (WSTOPSIG(status) == SIGCHLD) ||
- (WSTOPSIG(status) == SIGWINCH) ||
- (WSTOPSIG(status) == SIGINT)){
- ptrace(cont_type, pid, 0, WSTOPSIG(status));
- continue;
- }
- else if((relay_signals != NULL) &&
- sigismember(relay_signals, WSTOPSIG(status))){
- ptrace(cont_type, pid, 0, WSTOPSIG(status));
- continue;
- }
- else printk("process %d stopped with signal %d\n",
- pid, WSTOPSIG(status));
- panic("wait_for_stop failed to wait for %d to stop "
- "with %d\n", pid, sig);
- }
- return(status);
- }
-}
-
-int raw(int fd)
-{
- struct termios tt;
- int err;
-
- CATCH_EINTR(err = tcgetattr(fd, &tt));
- if(err < 0)
- return -errno;
-
- cfmakeraw(&tt);
-
- CATCH_EINTR(err = tcsetattr(fd, TCSADRAIN, &tt));
- if(err < 0)
- return -errno;
-
- /* XXX tcsetattr could have applied only some changes
- * (and cfmakeraw() is a set of changes) */
- return(0);
-}
-
-void setup_machinename(char *machine_out)
-{
- struct utsname host;
-
- uname(&host);
-#if defined(UML_CONFIG_UML_X86) && !defined(UML_CONFIG_64BIT)
- if (!strcmp(host.machine, "x86_64")) {
- strcpy(machine_out, "i686");
- return;
- }
-#endif
- strcpy(machine_out, host.machine);
-}
-
-char host_info[(_UTSNAME_LENGTH + 1) * 4 + _UTSNAME_NODENAME_LENGTH + 1];
-
-void setup_hostinfo(void)
-{
- struct utsname host;
-
- uname(&host);
- sprintf(host_info, "%s %s %s %s %s", host.sysname, host.nodename,
- host.release, host.version, host.machine);
-}
-
-int setjmp_wrapper(void (*proc)(void *, void *), ...)
-{
- va_list args;
- sigjmp_buf buf;
- int n;
-
- n = sigsetjmp(buf, 1);
- if(n == 0){
- va_start(args, proc);
- (*proc)(&buf, &args);
- }
- va_end(args);
- return(n);
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
Index: linux-2.6.15-mm/arch/um/os-Linux/Makefile
===================================================================
--- linux-2.6.15-mm.orig/arch/um/os-Linux/Makefile 2006-01-06 21:24:14.000000000 -0500
+++ linux-2.6.15-mm/arch/um/os-Linux/Makefile 2006-01-06 21:24:14.000000000 -0500
@@ -5,12 +5,12 @@
obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o user_syms.o \
- drivers/ sys-$(SUBARCH)/
+ util.o drivers/ sys-$(SUBARCH)/
obj-$(CONFIG_MODE_SKAS) += skas/
USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
- start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o
+ start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o util.o
elf_aux.o: $(ARCH_DIR)/kernel-offsets.h
CFLAGS_elf_aux.o += -I$(objtree)/arch/um
Index: linux-2.6.15-mm/arch/um/os-Linux/tt.c
===================================================================
--- linux-2.6.15-mm.orig/arch/um/os-Linux/tt.c 2006-01-06 21:24:14.000000000 -0500
+++ linux-2.6.15-mm/arch/um/os-Linux/tt.c 2006-01-06 21:46:20.000000000 -0500
@@ -63,6 +63,54 @@ void kill_child_dead(int pid)
} while(1);
}
+void stop(void)
+{
+ while(1) sleep(1000000);
+}
+
+int wait_for_stop(int pid, int sig, int cont_type, void *relay)
+{
+ sigset_t *relay_signals = relay;
+ int status, ret;
+
+ while(1){
+ CATCH_EINTR(ret = waitpid(pid, &status, WUNTRACED));
+ if((ret < 0) ||
+ !WIFSTOPPED(status) || (WSTOPSIG(status) != sig)){
+ if(ret < 0){
+ printk("wait failed, errno = %d\n",
+ errno);
+ }
+ else if(WIFEXITED(status))
+ printk("process %d exited with status %d\n",
+ pid, WEXITSTATUS(status));
+ else if(WIFSIGNALED(status))
+ printk("process %d exited with signal %d\n",
+ pid, WTERMSIG(status));
+ else if((WSTOPSIG(status) == SIGVTALRM) ||
+ (WSTOPSIG(status) == SIGALRM) ||
+ (WSTOPSIG(status) == SIGIO) ||
+ (WSTOPSIG(status) == SIGPROF) ||
+ (WSTOPSIG(status) == SIGCHLD) ||
+ (WSTOPSIG(status) == SIGWINCH) ||
+ (WSTOPSIG(status) == SIGINT)){
+ ptrace(cont_type, pid, 0, WSTOPSIG(status));
+ continue;
+ }
+ else if((relay_signals != NULL) &&
+ sigismember(relay_signals, WSTOPSIG(status))){
+ ptrace(cont_type, pid, 0, WSTOPSIG(status));
+ continue;
+ }
+ else printk("process %d stopped with signal %d\n",
+ pid, WSTOPSIG(status));
+ panic("wait_for_stop failed to wait for %d to stop "
+ "with %d\n", pid, sig);
+ }
+ return(status);
+ }
+}
+
/*
*-------------------------
* only for tt mode (will be deleted in future...)
Index: linux-2.6.15-mm/arch/um/os-Linux/util.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.15-mm/arch/um/os-Linux/util.c 2006-01-06 21:46:42.000000000 -0500
@@ -0,0 +1,116 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <limits.h>
+#include <setjmp.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/utsname.h>
+#include <sys/param.h>
+#include <sys/time.h>
+#include "asm/types.h"
+#include <ctype.h>
+#include <signal.h>
+#include <wait.h>
+#include <errno.h>
+#include <stdarg.h>
+#include <sched.h>
+#include <termios.h>
+#include <string.h>
+#include "user_util.h"
+#include "kern_util.h"
+#include "user.h"
+#include "mem_user.h"
+#include "init.h"
+#include "ptrace_user.h"
+#include "uml-config.h"
+#include "os.h"
+
+void stack_protections(unsigned long address)
+{
+ int prot = PROT_READ | PROT_WRITE | PROT_EXEC;
+
+ if(mprotect((void *) address, page_size(), prot) < 0)
+ panic("protecting stack failed, errno = %d", errno);
+}
+
+void task_protections(unsigned long address)
+{
+ unsigned long guard = address + page_size();
+ unsigned long stack = guard + page_size();
+ int prot = 0, pages;
+
+#ifdef notdef
+ if(mprotect((void *) stack, page_size(), prot) < 0)
+ panic("protecting guard page failed, errno = %d", errno);
+#endif
+ pages = (1 << UML_CONFIG_KERNEL_STACK_ORDER) - 2;
+ prot = PROT_READ | PROT_WRITE | PROT_EXEC;
+ if(mprotect((void *) stack, pages * page_size(), prot) < 0)
+ panic("protecting stack failed, errno = %d", errno);
+}
+
+int raw(int fd)
+{
+ struct termios tt;
+ int err;
+
+ CATCH_EINTR(err = tcgetattr(fd, &tt));
+ if(err < 0)
+ return -errno;
+
+ cfmakeraw(&tt);
+
+ CATCH_EINTR(err = tcsetattr(fd, TCSADRAIN, &tt));
+ if(err < 0)
+ return -errno;
+
+ /* XXX tcsetattr could have applied only some changes
+ * (and cfmakeraw() is a set of changes) */
+ return(0);
+}
+
+void setup_machinename(char *machine_out)
+{
+ struct utsname host;
+
+ uname(&host);
+#if defined(UML_CONFIG_UML_X86) && !defined(UML_CONFIG_64BIT)
+ if (!strcmp(host.machine, "x86_64")) {
+ strcpy(machine_out, "i686");
+ return;
+ }
+#endif
+ strcpy(machine_out, host.machine);
+}
+
+char host_info[(_UTSNAME_LENGTH + 1) * 4 + _UTSNAME_NODENAME_LENGTH + 1];
+
+void setup_hostinfo(void)
+{
+ struct utsname host;
+
+ uname(&host);
+ sprintf(host_info, "%s %s %s %s %s", host.sysname, host.nodename,
+ host.release, host.version, host.machine);
+}
+
+int setjmp_wrapper(void (*proc)(void *, void *), ...)
+{
+ va_list args;
+ sigjmp_buf buf;
+ int n;
+
+ n = sigsetjmp(buf, 1);
+ if(n == 0){
+ va_start(args, proc);
+ (*proc)(&buf, &args);
+ }
+ va_end(args);
+ return(n);
+}
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
reply other threads:[~2006-01-15 20:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200601152139.k0FLdapx027710@ccure.user-mode-linux.org \
--to=jdike@addtoit.com \
--cc=Gennady.V.Sharapov@intel.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=user-mode-linux-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).