linux-um archives
 help / color / mirror / Atom feed
From: Jeff Dike <jdike@addtoit.com>
To: Andrew Morton <akpm@osdl.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	uml-devel <user-mode-linux-devel@lists.sourceforge.net>
Subject: [uml-devel] [PATCH 1/8] UML - Move um_virt_to_phys
Date: Fri, 16 Nov 2007 16:42:24 -0500	[thread overview]
Message-ID: <20071116214224.GA13847@c2.user-mode-linux.org> (raw)

This patchset makes UML build and run with three-level page tables on
32-bit hosts.  This is an uncommon use case, but the code here needed
fixing and cleaning up, so 32-bit three-level pages tables were tested
to make sure the changes are good.

Patch 1 - code movement
Patch 2 - header untangling
Patch 3 - style fixups in files affected so far
Patch 4 - clean up use of current.h
Patch 5 - fix sizes of types that are different between 2 and 3-level
	page tables - three-level page table support should build at
	this point
Patch 6 - tidy (i.e. eliminate much of) the code that figures out how
	big the address space is
Patch 7 - change um_virt_to_phys into virt_to_pte, clean its
	interface, and clean its (so far) one caller
Patch 8 - the stub pages are covered with a VMA, allowing some nasty
	code to be thrown out - three-level page tables now work

This patch:

um_virt_to_phys only has one user, so it can be moved to the same file
and made static.  Its declarations in pgtable.h and ksyms.c are also
gone.

current_cmd was another apparent user, but it itself isn't used, so it
is deleted.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
---
 arch/um/kernel/ksyms.c        |    1 
 arch/um/kernel/process.c      |   43 ------------------------------------------
 arch/um/kernel/skas/uaccess.c |   34 +++++++++++++++++++++++++++++++--
 include/asm-um/pgtable.h      |    3 --
 4 files changed, 32 insertions(+), 49 deletions(-)

Index: linux-2.6.22/arch/um/kernel/process.c
===================================================================
--- linux-2.6.22.orig/arch/um/kernel/process.c	2007-11-15 16:34:14.000000000 -0500
+++ linux-2.6.22/arch/um/kernel/process.c	2007-11-16 13:14:41.000000000 -0500
@@ -256,49 +256,6 @@ void cpu_idle(void)
 	default_idle();
 }
 
-void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
-		      pte_t *pte_out)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	pte_t ptent;
-
-	if (task->mm == NULL)
-		return ERR_PTR(-EINVAL);
-	pgd = pgd_offset(task->mm, addr);
-	if (!pgd_present(*pgd))
-		return ERR_PTR(-EINVAL);
-
-	pud = pud_offset(pgd, addr);
-	if (!pud_present(*pud))
-		return ERR_PTR(-EINVAL);
-
-	pmd = pmd_offset(pud, addr);
-	if (!pmd_present(*pmd))
-		return ERR_PTR(-EINVAL);
-
-	pte = pte_offset_kernel(pmd, addr);
-	ptent = *pte;
-	if (!pte_present(ptent))
-		return ERR_PTR(-EINVAL);
-
-	if (pte_out != NULL)
-		*pte_out = ptent;
-	return (void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK);
-}
-
-char *current_cmd(void)
-{
-#if defined(CONFIG_SMP) || defined(CONFIG_HIGHMEM)
-	return "(Unknown)";
-#else
-	void *addr = um_virt_to_phys(current, current->mm->arg_start, NULL);
-	return IS_ERR(addr) ? "(Unknown)": __va((unsigned long) addr);
-#endif
-}
-
 int __cant_sleep(void) {
 	return in_atomic() || irqs_disabled() || in_interrupt();
 	/* Is in_interrupt() really needed? */
Index: linux-2.6.22/arch/um/kernel/skas/uaccess.c
===================================================================
--- linux-2.6.22.orig/arch/um/kernel/skas/uaccess.c	2007-11-15 16:34:14.000000000 -0500
+++ linux-2.6.22/arch/um/kernel/skas/uaccess.c	2007-11-16 13:14:41.000000000 -0500
@@ -12,8 +12,38 @@
 #include "kern_util.h"
 #include "os.h"
 
-extern void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
-			     pte_t *pte_out);
+static void *um_virt_to_phys(struct task_struct *task, unsigned long addr,
+			     pte_t *pte_out)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	pte_t ptent;
+
+	if (task->mm == NULL)
+		return ERR_PTR(-EINVAL);
+	pgd = pgd_offset(task->mm, addr);
+	if (!pgd_present(*pgd))
+		return ERR_PTR(-EINVAL);
+
+	pud = pud_offset(pgd, addr);
+	if (!pud_present(*pud))
+		return ERR_PTR(-EINVAL);
+
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd))
+		return ERR_PTR(-EINVAL);
+
+	pte = pte_offset_kernel(pmd, addr);
+	ptent = *pte;
+	if (!pte_present(ptent))
+		return ERR_PTR(-EINVAL);
+
+	if (pte_out != NULL)
+		*pte_out = ptent;
+	return (void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK);
+}
 
 static unsigned long maybe_map(unsigned long virt, int is_write)
 {
Index: linux-2.6.22/include/asm-um/pgtable.h
===================================================================
--- linux-2.6.22.orig/include/asm-um/pgtable.h	2007-11-15 16:34:14.000000000 -0500
+++ linux-2.6.22/include/asm-um/pgtable.h	2007-11-16 13:14:41.000000000 -0500
@@ -31,9 +31,6 @@
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-extern void *um_virt_to_phys(struct task_struct *task, unsigned long virt,
-			     pte_t *pte_out);
-
 /* zero page used for uninitialized stuff */
 extern unsigned long *empty_zero_page;
 
Index: linux-2.6.22/arch/um/kernel/ksyms.c
===================================================================
--- linux-2.6.22.orig/arch/um/kernel/ksyms.c	2007-11-15 16:34:14.000000000 -0500
+++ linux-2.6.22/arch/um/kernel/ksyms.c	2007-11-16 13:14:39.000000000 -0500
@@ -25,7 +25,6 @@ EXPORT_SYMBOL(get_kmem_end);
 
 EXPORT_SYMBOL(high_physmem);
 EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(um_virt_to_phys);
 EXPORT_SYMBOL(handle_page_fault);
 EXPORT_SYMBOL(find_iomem);
 

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel

                 reply	other threads:[~2007-11-16 21:42 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071116214224.GA13847@c2.user-mode-linux.org \
    --to=jdike@addtoit.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=user-mode-linux-devel@lists.sourceforge.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox