From: Eryu Guan <eguan@redhat.com>
To: fstests@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org, xzhou@redhat.com,
Eryu Guan <eguan@redhat.com>
Subject: [PATCH] overlay: copy-up lowerdir which has opaque xattr set
Date: Tue, 9 Aug 2016 01:23:53 +0800 [thread overview]
Message-ID: <1470677033-7035-1-git-send-email-eguan@redhat.com> (raw)
When copying up a directory with opaque xattr set, the xattr was
copied up as well, after a remount the opaque flag is honored so the
copied-up directory is treated as opaque, which causes files created
in the lowerdir to be hidden when using multiple lower directories.
This is fixed by "ovl: don't copy up opaqueness".
Signed-off-by: Eryu Guan <eguan@redhat.com>
---
tests/overlay/014 | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++
tests/overlay/014.out | 3 ++
tests/overlay/group | 1 +
3 files changed, 100 insertions(+)
create mode 100755 tests/overlay/014
create mode 100644 tests/overlay/014.out
diff --git a/tests/overlay/014 b/tests/overlay/014
new file mode 100755
index 0000000..d9d8b5d
--- /dev/null
+++ b/tests/overlay/014
@@ -0,0 +1,96 @@
+#! /bin/bash
+# FS QA Test 014
+#
+# Test copy-up of lowerdir with opaque xattr set.
+#
+# When copying up a directory with opaque xattr set, the xattr was copied up as
+# well, after a remount the opaque flag is honored so the copied-up directory
+# is treated as opaque, which causes files created in the lowerdir to be hidden
+# when using multiple lower directories.
+#
+# This is fixed by "ovl: don't copy up opaqueness".
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Red Hat Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs overlay
+_supported_os Linux
+_require_test
+_require_scratch
+_require_attrs
+
+# Remove all files from previous tests
+_scratch_mkfs
+
+# Create multiple lowerdirs and upperdir, workdir, and testdir on lowerdir
+lowerdir1=$SCRATCH_DEV/lower1
+lowerdir2=$SCRATCH_DEV/lower2
+upperdir=$SCRATCH_DEV/upper
+workdir=$SCRATCH_DEV/workdir
+mkdir -p $lowerdir1 $lowerdir2 $upperdir $workdir
+mkdir -p $lowerdir1/testdir/d
+
+# mount overlay with $lowerdir2 as upperdir, and remove & recreate testdir,
+# make testdir on $lowerdir2 opaque
+$MOUNT_PROG -t overlay -o lowerdir=$lowerdir1,upperdir=$lowerdir2 \
+ -o workdir=$workdir none $SCRATCH_MNT
+rm -rf $SCRATCH_MNT/testdir
+mkdir -p $SCRATCH_MNT/testdir/visibledir
+$UMOUNT_PROG $SCRATCH_MNT
+
+# mount overlay again, with lowerdir1 and lowerdir2 as multiple lowerdirs,
+# and create a new file in testdir, triggers copyup from lowerdir,
+# copyup should not copy overlayfs private xattr
+$MOUNT_PROG -t overlay -o lowerdir=$lowerdir2:$lowerdir1,upperdir=$upperdir \
+ -o workdir=$workdir none $SCRATCH_MNT
+touch $SCRATCH_MNT/testdir/visiblefile
+
+# umount and mount overlay again, buggy kernel treats the copied-up dir as
+# opaque, visibledir is not seen in merged dir.
+$UMOUNT_PROG $SCRATCH_MNT
+$MOUNT_PROG -t overlay -o lowerdir=$lowerdir2:$lowerdir1,upperdir=$upperdir \
+ -o workdir=$workdir none $SCRATCH_MNT
+ls $SCRATCH_MNT/testdir
+
+# success, all done
+status=0
+exit
diff --git a/tests/overlay/014.out b/tests/overlay/014.out
new file mode 100644
index 0000000..ec09c4d
--- /dev/null
+++ b/tests/overlay/014.out
@@ -0,0 +1,3 @@
+QA output created by 014
+visibledir
+visiblefile
diff --git a/tests/overlay/group b/tests/overlay/group
index 5c80566..71eaadb 100644
--- a/tests/overlay/group
+++ b/tests/overlay/group
@@ -16,3 +16,4 @@
011 auto quick
012 auto quick
013 auto quick
+014 auto quick copyup
--
2.7.4
next reply other threads:[~2016-08-08 17:23 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-08 17:23 Eryu Guan [this message]
2016-08-09 4:09 ` [PATCH] overlay: copy-up lowerdir which has opaque xattr set Xiong Zhou
2016-08-09 6:37 ` Dave Chinner
2016-08-09 6:55 ` Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470677033-7035-1-git-send-email-eguan@redhat.com \
--to=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=linux-unionfs@vger.kernel.org \
--cc=xzhou@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).