From: Amir Goldstein <amir73il@gmail.com>
To: Eryu Guan <eguan@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>,
linux-unionfs@vger.kernel.org, fstests@vger.kernel.org
Subject: [PATCH 3/3] overlay: test decoding overlay file handles with warm/cold dentry cache
Date: Sun, 25 Mar 2018 17:53:11 +0300 [thread overview]
Message-ID: <1521989591-9496-4-git-send-email-amir73il@gmail.com> (raw)
In-Reply-To: <1521989591-9496-1-git-send-email-amir73il@gmail.com>
When opening a non-dir by file handle and the decoded inode/dentry
are not in cache, the resulting dentry is "disconnected" (i.e. unknown
path). This is a common case that is already covered by previous tests.
This test covers the case of decoding an overlay file handle, while a
disconnected dentry is still in cache.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
---
tests/overlay/058 | 137 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/overlay/058.out | 9 ++++
tests/overlay/group | 1 +
3 files changed, 147 insertions(+)
create mode 100755 tests/overlay/058
create mode 100644 tests/overlay/058.out
diff --git a/tests/overlay/058 b/tests/overlay/058
new file mode 100755
index 0000000..4c4ca45
--- /dev/null
+++ b/tests/overlay/058
@@ -0,0 +1,137 @@
+#! /bin/bash
+# FS QA Test No. 058
+#
+# Test decoding overlay file handles with warm/cold dentry cache
+#
+# When opening a non-dir by file handle and the decoded inode/dentry
+# are not in cache, the resulting dentry is "disconnected" (i.e. unknown
+# path). This is a common case that is already covered by previous tests.
+# This test covers the case of decoding an overlay file handle, while a
+# disconnected dentry is still in cache.
+#
+# This test requires and enables overlayfs NFS export support.
+# NFS export support depends on and requires overlayfs index feature.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2018 CTERA Networks. All Rights Reserved.
+# Author: Amir Goldstein <amir73il@gmail.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ $KILLALL_PROG -9 open_by_handle >/dev/null 2>&1
+ wait
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+
+_supported_fs overlay
+_supported_os Linux
+_require_scratch
+_require_test_program "open_by_handle"
+# We need to require all features together, because nfs_export cannot
+# be enabled when index is disabled
+_require_scratch_overlay_features index nfs_export
+_require_command "$KILLALL_PROG" killall
+
+# All overlay dirs are on scratch partition
+lower=$OVL_BASE_SCRATCH_MNT/$OVL_LOWER
+upper=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
+work=$OVL_BASE_SCRATCH_MNT/$OVL_WORK
+
+# Keep this number > 1, because open_by_handle -rp does faccessat()
+# on file file000000, which makes that dentry connected
+NUMFILES=10
+
+# Create test dir and empty test files
+create_test_files()
+{
+ local dir=$1
+ local opt=$2
+
+ mkdir -p $dir
+ $here/src/open_by_handle -cp $opt $dir $NUMFILES
+}
+
+# Test encode/decode file handles on overlay mount
+test_file_handles()
+{
+ local dir=$1
+ shift
+
+ echo test_file_handles $dir $* | _filter_scratch | \
+ sed -e "s,$tmp\.,,g"
+ $here/src/open_by_handle $* $dir $NUMFILES
+}
+
+# Create lower/upper dir and files
+_scratch_mkfs
+create_test_files $upper/uppertestdir -w
+create_test_files $lower/lowertestdir -w
+_scratch_mount -o "index=on,nfs_export=on"
+# Encode upper file handles
+test_file_handles $SCRATCH_MNT/uppertestdir -p -o $tmp.upper_file_handles
+# Encode lower file handles
+test_file_handles $SCRATCH_MNT/lowertestdir -p -o $tmp.lower_file_handles
+
+# Check decode and read from stored file handles with warm caches -
+# At this time, all non-dir dentries are connected, because the entries
+# were created on lookup, before encoding the file handles.
+test_file_handles $SCRATCH_MNT -rnp -i $tmp.upper_file_handles
+test_file_handles $SCRATCH_MNT -rnp -i $tmp.lower_file_handles
+
+# Check decode and read/readdir from stored file handles with cold caches -
+# -s sleeps in the background to keep files open and keep disconnected
+# overlay dentries in cache
+_scratch_cycle_mount "index=on,nfs_export=on"
+test_file_handles $SCRATCH_MNT -rnps -i $tmp.upper_file_handles &
+# Give the above 1 second to get to sleep loop
+sleep 1
+test_file_handles $SCRATCH_MNT -rnps -i $tmp.lower_file_handles &
+# Give the above 1 second to get to sleep loop
+sleep 1
+
+# Check decode and read/readdir from stored file handles with warm caches -
+# At this time, all non-dir dentries are disconnected, because there was
+# no lookup to the files since drop caches. The expection to this rule
+# is lower and upper file000000. open_by_handle -rp above did faccessat()
+# on file file000000, which created a connected dentry alias in addition
+# to the disconnected dentry alias.
+test_file_handles $SCRATCH_MNT -rnp -i $tmp.upper_file_handles
+test_file_handles $SCRATCH_MNT -rnp -i $tmp.lower_file_handles
+
+# SIGPIPE avoids Terminated/Killed message from bash
+$KILLALL_PROG -q -13 open_by_handle
+wait
+
+status=0
+exit
diff --git a/tests/overlay/058.out b/tests/overlay/058.out
new file mode 100644
index 0000000..6ff9811
--- /dev/null
+++ b/tests/overlay/058.out
@@ -0,0 +1,9 @@
+QA output created by 058
+test_file_handles SCRATCH_MNT/uppertestdir -p -o upper_file_handles
+test_file_handles SCRATCH_MNT/lowertestdir -p -o lower_file_handles
+test_file_handles SCRATCH_MNT -rnp -i upper_file_handles
+test_file_handles SCRATCH_MNT -rnp -i lower_file_handles
+test_file_handles SCRATCH_MNT -rnps -i upper_file_handles
+test_file_handles SCRATCH_MNT -rnps -i lower_file_handles
+test_file_handles SCRATCH_MNT -rnp -i upper_file_handles
+test_file_handles SCRATCH_MNT -rnp -i lower_file_handles
diff --git a/tests/overlay/group b/tests/overlay/group
index c49ae3a..359ed42 100644
--- a/tests/overlay/group
+++ b/tests/overlay/group
@@ -60,3 +60,4 @@
055 auto quick copyup redirect exportfs nonsamefs
056 auto quick fsck
057 auto quick redirect
+058 auto quick exportfs
--
2.7.4
next prev parent reply other threads:[~2018-03-25 14:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-25 14:53 [PATCH 0/3] Yet another overlayfs exportfs test Amir Goldstein
2018-03-25 14:53 ` [PATCH 1/3] open_by_handle: add -n option to suppress drop caches Amir Goldstein
2018-03-29 3:21 ` Eryu Guan
2018-03-25 14:53 ` [PATCH 2/3] open_by_handle: add -s option to sleep and keep files open by handle Amir Goldstein
2018-03-29 3:30 ` Eryu Guan
2018-03-29 11:59 ` Amir Goldstein
2018-03-25 14:53 ` Amir Goldstein [this message]
2018-03-29 3:39 ` [PATCH 3/3] overlay: test decoding overlay file handles with warm/cold dentry cache Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521989591-9496-4-git-send-email-amir73il@gmail.com \
--to=amir73il@gmail.com \
--cc=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=linux-unionfs@vger.kernel.org \
--cc=miklos@szeredi.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox