From: Vivek Goyal <vgoyal@redhat.com>
To: eguan@redhat.com, fstests@vger.kernel.org,
Amir Goldstein <amir73il@gmail.com>
Cc: linux-unionfs@vger.kernel.org, Miklos Szeredi <miklos@szeredi.hu>
Subject: [PATCH V2] xfstest: overlay: Absolute redirect should be followed even if ancestor is opaque
Date: Tue, 13 Mar 2018 11:05:52 -0400 [thread overview]
Message-ID: <20180313150552.GC2982@redhat.com> (raw)
Typically, when following absolute redirect, if an opauqe dentry is
found, lookup in further lower directories is stopped. But if a
child dentry has another absolute redirect, then lookup in further
lower layers should continue.
Say, following is example setup.
upper: /redirect (redirect=/a/b/c)
lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo
"redirect" directory in upper should merge with lower1:/a/b/c/ and
lower0:/a/b/d/, despite lower1:/a/b/ being opaque.
This example and kernel fix has come from Amir Goldstein. I am just putting
a test for it to make sure its not broken down the line.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
---
tests/overlay/057 | 91 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/overlay/057.out | 2 +
tests/overlay/group | 1
3 files changed, 94 insertions(+)
Index: xfstests-dev/tests/overlay/057
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ xfstests-dev/tests/overlay/057 2018-03-13 10:37:43.321123202 -0400
@@ -0,0 +1,91 @@
+#! /bin/bash
+# FS QA Test No. 057
+#
+# Test absolute redirect is followed even if ancestor is opaque
+#
+# Typically, when following absolute redirect, if an opauqe dentry is
+# found, lookup in further lower directories is stopped. But if a
+# child dentry has another absolute redirect, then lookup in further
+# lower layers should continue.
+#
+# Say, following is example setup.
+# upper: /redirect (redirect=/a/b/c)
+# lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
+# lower0: /a/b/d/foo
+#
+# "redirect" directory in upper should merge with lower1:/a/b/c/ and
+# lower0:/a/b/d/, despite lower1:/a/b/ being opaque.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2018 Red Hat, Inc. All Rights Reserved.
+# Author: Vivek Goyal <vgoyal@redhat.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs overlay
+_supported_os Linux
+_require_scratch_nocheck
+_require_scratch_overlay_features redirect_dir
+
+# remove all files from previous tests
+_scratch_mkfs
+
+# Create test directories
+lowerdir=$OVL_BASE_SCRATCH_MNT/lower
+lowerdir2=$OVL_BASE_SCRATCH_MNT/lower2
+upperdir=$OVL_BASE_SCRATCH_MNT/upper
+workdir=$OVL_BASE_SCRATCH_MNT/workdir
+workdir2=$OVL_BASE_SCRATCH_MNT/workdir2
+
+mkdir -p $lowerdir $lowerdir2 $upperdir $workdir $workdir2
+mkdir -p $lowerdir/origin
+touch $lowerdir/origin/foo
+_overlay_scratch_mount_dirs $lowerdir $lowerdir2 $workdir2 -o redirect_dir=on
+mkdir $SCRATCH_MNT/pure
+mv $SCRATCH_MNT/origin $SCRATCH_MNT/pure/redirect
+$UMOUNT_PROG $SCRATCH_MNT
+_overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
+mv $SCRATCH_MNT/pure/redirect $SCRATCH_MNT/redirect
+$UMOUNT_PROG $SCRATCH_MNT
+_overlay_scratch_mount_dirs $lowerdir2:$lowerdir $upperdir $workdir -o redirect_dir=on
+ls $SCRATCH_MNT/redirect/
+
+# success, all done
+status=0
+exit
Index: xfstests-dev/tests/overlay/group
===================================================================
--- xfstests-dev.orig/tests/overlay/group 2018-02-28 15:27:29.981693615 -0500
+++ xfstests-dev/tests/overlay/group 2018-03-12 09:31:45.692818432 -0400
@@ -59,3 +59,4 @@
054 auto quick copyup redirect exportfs
055 auto quick copyup redirect exportfs nonsamefs
056 auto quick fsck
+057 auto quick redirect
Index: xfstests-dev/tests/overlay/057.out
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ xfstests-dev/tests/overlay/057.out 2018-03-12 13:09:42.061818432 -0400
@@ -0,0 +1,2 @@
+QA output created by 057
+foo
next reply other threads:[~2018-03-13 15:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-13 15:05 Vivek Goyal [this message]
2018-03-13 15:18 ` [PATCH V2] xfstest: overlay: Absolute redirect should be followed even if ancestor is opaque Vivek Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180313150552.GC2982@redhat.com \
--to=vgoyal@redhat.com \
--cc=amir73il@gmail.com \
--cc=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=linux-unionfs@vger.kernel.org \
--cc=miklos@szeredi.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox