Re: [PATCH v2 2/5] dt-bindings: phy: qcom,qmp-usb: Add SDX75 USB3 PHY

[Rohit Agarwal <quic_rohiagar@quicinc.com>]

On 9/6/2023 11:09 AM, Dmitry Baryshkov wrote:
> On Wed, 6 Sept 2023 at 08:26, Rohit Agarwal <quic_rohiagar@quicinc.com> wrote:
>>
>> On 9/6/2023 10:52 AM, Rohit Agarwal wrote:
>>> On 9/6/2023 2:04 AM, Dmitry Baryshkov wrote:
>>>> On 05/09/2023 13:30, Rohit Agarwal wrote:
>>>>> Add dt-bindings for USB3 PHY found on Qualcomm SDX75.
>>>>>
>>>>> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
>>>>> ---
>>>>>    .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        | 40
>>>>> ++++++++++++++++++++--
>>>>>    1 file changed, 37 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git
>>>>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
>>>>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
>>>>>
>>>>> index f99fbbc..5725620 100644
>>>>> ---
>>>>> a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
>>>>> +++
>>>>> b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
>>>>> @@ -20,6 +20,7 @@ properties:
>>>>>          - qcom,qcm2290-qmp-usb3-phy
>>>>>          - qcom,sa8775p-qmp-usb3-uni-phy
>>>>>          - qcom,sc8280xp-qmp-usb3-uni-phy
>>>>> +      - qcom,sdx75-qmp-usb3-uni-phy
>>>> I think the ident is wrong here.
>>> Same. Somehow, your reply has the issue but original not able to see.
>>>
>>>>>          - qcom,sm6115-qmp-usb3-phy
>>>>>        reg:
>>>>> @@ -38,9 +39,7 @@ properties:
>>>>>        maxItems: 2
>>>>>        reset-names:
>>>>> -    items:
>>>>> -      - const: phy
>>>>> -      - const: phy_phy
>>>>> +    maxItems: 2
>>>>>        vdda-phy-supply: true
>>>>>    @@ -75,6 +74,7 @@ allOf:
>>>>>              contains:
>>>>>                enum:
>>>>>                  - qcom,ipq9574-qmp-usb3-phy
>>>>> +              - qcom,sdx75-qmp-usb3-uni-phy
>>>>>        then:
>>>>>          properties:
>>>>>            clock-names:
>>>>> @@ -122,6 +122,40 @@ allOf:
>>>>>          required:
>>>>>            - power-domains
>>>>>    +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - qcom,ipq9574-qmp-usb3-phy
>>>>> +              - qcom,qcm2290-qmp-usb3-phy
>>>>> +              - qcom,sa8775p-qmp-usb3-uni-phy
>>>>> +              - qcom,sc8280xp-qmp-usb3-uni-phy
>>>>> +              - qcom,sm6115-qmp-usb3-phy
>>>>> +    then:
>>>>> +      properties:
>>>>> +        resets:
>>>>> +          maxItems: 2
>>>>> +        reset-names:
>>>>> +          items:
>>>>> +            - const: phy
>>>>> +            - const: phy_phy
>>>>> +
>>>>> +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - qcom,sdx75-qmp-usb3-uni-phy
>>>>> +    then:
>>>>> +      properties:
>>>>> +        resets:
>>>>> +          maxItems: 2
>>>>> +        reset-names:
>>>>> +          items:
>>>>> +            - const: phy
>>>>> +            - const: common
>>>> Could you please point us to the actual DTS patch adding this PHY?
>>>> I'd say, it is highly likely that you are trying to bring in the
>>>> unnecessary change.
>>> I have not posted the dt patches yet. But sdx75 uses these resets.
>>> GCC_USB3PHY_PHY_BCR, GCC_USB3_PHY_BCR
>>>
>>> These are same as sdx65 and sdx55.
>> Ok I see in your patch
>> https://lore.kernel.org/linux-phy/20230824211952.1397699-17-dmitry.baryshkov@linaro.org/
>> you are updating the resets name. Fine, this change becomes unnecessary.
>> Will rebase my change on your patches.
> Well, even without my changes, GCC_USB3PHY_PHY_BCR is "phy_phy", just
> judging by the name.
Yes. Ok.

Thanks,
Rohit.