linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* usb: uhci: Add clk support to uhci-platform
@ 2018-01-12  5:51 Benjamin Herrenschmidt
  0 siblings, 0 replies; 3+ messages in thread
From: Benjamin Herrenschmidt @ 2018-01-12  5:51 UTC (permalink / raw)
  To: Alan Stern; +Cc: linux-usb, Greg KH

The Aspeed SoCs use uhci-platform. With the new dynamic clock
control framework, the corresponding IP block clock must be
properly enabled.

This is a simplified variant of what ehci-platform does, it
looks for *one* clock attached to the device, and if it's
there, enables it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/usb/host/uhci-hcd.h      |  3 +++
 drivers/usb/host/uhci-platform.c | 15 +++++++++++++++
 2 files changed, 18 insertions(+)


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index f1cc47292a59..7f9f33c8c232 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -4,6 +4,7 @@
 
 #include <linux/list.h>
 #include <linux/usb.h>
+#include <linux/clk.h>
 
 #define usb_packetid(pipe)	(usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
 #define PIPE_DEVEP_MASK		0x0007ff00
@@ -447,6 +448,8 @@ struct uhci_hcd {
 	int total_load;				/* Sum of array values */
 	short load[MAX_PHASE];			/* Periodic allocations */
 
+	struct clk *clk;			/* (optional) clock source */
+
 	/* Reset host controller */
 	void	(*reset_hc) (struct uhci_hcd *uhci);
 	int	(*check_and_reset_hc) (struct uhci_hcd *uhci);
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 6cb16d4b2257..7d959071f92b 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -119,6 +119,21 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 				 "Enabled Aspeed implementation workarounds\n");
 		}
 	}
+
+	/* Get and enable clock if any specified */
+	uhci->clk = devm_clk_get(&pdev->dev, NULL);
+        if (IS_ERR(uhci->clk)) {
+                ret = PTR_ERR(uhci->clk);
+                goto err_rmr;
+        }
+	if (uhci->clk) {
+		ret = clk_prepare_enable(uhci->clk);
+		if (ret) {
+			dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
+			goto err_rmr;
+		}
+        }
+
 	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
 	if (ret)
 		goto err_rmr;

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* usb: uhci: Add clk support to uhci-platform
@ 2018-01-12  7:35 Sergei Shtylyov
  0 siblings, 0 replies; 3+ messages in thread
From: Sergei Shtylyov @ 2018-01-12  7:35 UTC (permalink / raw)
  To: Benjamin Herrenschmidt, Alan Stern; +Cc: linux-usb, Greg KH

Hello!

On 1/12/2018 8:51 AM, Benjamin Herrenschmidt wrote:

> The Aspeed SoCs use uhci-platform. With the new dynamic clock
> control framework, the corresponding IP block clock must be
> properly enabled.
> 
> This is a simplified variant of what ehci-platform does, it
> looks for *one* clock attached to the device, and if it's
> there, enables it.
> 
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[...]
> diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
> index 6cb16d4b2257..7d959071f92b 100644
> --- a/drivers/usb/host/uhci-platform.c
> +++ b/drivers/usb/host/uhci-platform.c
> @@ -119,6 +119,21 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
>   				 "Enabled Aspeed implementation workarounds\n");
>   		}
>   	}
> +
> +	/* Get and enable clock if any specified */
> +	uhci->clk = devm_clk_get(&pdev->dev, NULL);
> +        if (IS_ERR(uhci->clk)) {
> +                ret = PTR_ERR(uhci->clk);
> +                goto err_rmr;
> +        }

    Indent with tabs as elsewhere, please.

> +	if (uhci->clk) {
> +		ret = clk_prepare_enable(uhci->clk);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
> +			goto err_rmr;
> +		}
> +        }
> +
>   	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
>   	if (ret)
>   		goto err_rmr;
> 
[...]

MBR, Segei
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 3+ messages in thread

* usb: uhci: Add clk support to uhci-platform
@ 2018-01-12 22:27 Benjamin Herrenschmidt
  0 siblings, 0 replies; 3+ messages in thread
From: Benjamin Herrenschmidt @ 2018-01-12 22:27 UTC (permalink / raw)
  To: Sergei Shtylyov, Alan Stern; +Cc: linux-usb, Greg KH

On Fri, 2018-01-12 at 10:35 +0300, Sergei Shtylyov wrote:
> Hello!
> 
> On 1/12/2018 8:51 AM, Benjamin Herrenschmidt wrote:
> 
> > The Aspeed SoCs use uhci-platform. With the new dynamic clock
> > control framework, the corresponding IP block clock must be
> > properly enabled.
> > 
> > This is a simplified variant of what ehci-platform does, it
> > looks for *one* clock attached to the device, and if it's
> > there, enables it.
> > 
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> 
> [...]
> > diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
> > index 6cb16d4b2257..7d959071f92b 100644
> > --- a/drivers/usb/host/uhci-platform.c
> > +++ b/drivers/usb/host/uhci-platform.c
> > @@ -119,6 +119,21 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
> >   				 "Enabled Aspeed implementation workarounds\n");
> >   		}
> >   	}
> > +
> > +	/* Get and enable clock if any specified */
> > +	uhci->clk = devm_clk_get(&pdev->dev, NULL);
> > +        if (IS_ERR(uhci->clk)) {
> > +                ret = PTR_ERR(uhci->clk);
> > +                goto err_rmr;
> > +        }
> 
>     Indent with tabs as elsewhere, please.

Oops, there should have been, I suppose a copy/paste brought spaces
from the original file ;-) I'll fix that.

> > +	if (uhci->clk) {
> > +		ret = clk_prepare_enable(uhci->clk);
> > +		if (ret) {
> > +			dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
> > +			goto err_rmr;
> > +		}
> > +        }
> > +
> >   	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
> >   	if (ret)
> >   		goto err_rmr;
> > 
> 
> [...]
> 
> MBR, Segei
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2018-01-12 22:27 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-12  5:51 usb: uhci: Add clk support to uhci-platform Benjamin Herrenschmidt
  -- strict thread matches above, loose matches on Subject: below --
2018-01-12  7:35 Sergei Shtylyov
2018-01-12 22:27 Benjamin Herrenschmidt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).