linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org, Greg KH <greg@kroah.com>
Subject: [v3] usb: uhci: Add clk support to uhci-platform
Date: Sat, 13 Jan 2018 09:39:02 +1100	[thread overview]
Message-ID: <1515796742.31850.116.camel@kernel.crashing.org> (raw)

The Aspeed SoCs use uhci-platform. With the new dynamic clock
control framework, the corresponding IP block clock must be
properly enabled.

This is a simplified variant of what ehci-platform does, it
looks for *one* clock attached to the device, and if it's
there, enables it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

v3. Fix tab vs. spaces and probe error path

v2. Don't forget to git add latest changes :-) This adds the
    part where we turn the clock off when removing the driver.

 drivers/usb/host/uhci-hcd.h      |  3 +++
 drivers/usb/host/uhci-platform.c | 24 ++++++++++++++++++++++--
 2 files changed, 25 insertions(+), 2 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index f1cc47292a59..7f9f33c8c232 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -4,6 +4,7 @@
 
 #include <linux/list.h>
 #include <linux/usb.h>
+#include <linux/clk.h>
 
 #define usb_packetid(pipe)	(usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
 #define PIPE_DEVEP_MASK		0x0007ff00
@@ -447,6 +448,8 @@ struct uhci_hcd {
 	int total_load;				/* Sum of array values */
 	short load[MAX_PHASE];			/* Periodic allocations */
 
+	struct clk *clk;			/* (optional) clock source */
+
 	/* Reset host controller */
 	void	(*reset_hc) (struct uhci_hcd *uhci);
 	int	(*check_and_reset_hc) (struct uhci_hcd *uhci);
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 6cb16d4b2257..0d86ad244922 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -89,6 +89,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 	if (!hcd)
 		return -ENOMEM;
 
+	uhci = hcd_to_uhci(hcd);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(hcd->regs)) {
@@ -98,8 +100,6 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
 
-	uhci = hcd_to_uhci(hcd);
-
 	uhci->regs = hcd->regs;
 
 	/* Grab some things from the device-tree */
@@ -119,6 +119,21 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 				 "Enabled Aspeed implementation workarounds\n");
 		}
 	}
+
+	/* Get and enable clock if any specified */
+	uhci->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(uhci->clk)) {
+		ret = PTR_ERR(uhci->clk);
+		goto err_rmr;
+	}
+	if (uhci->clk) {
+		ret = clk_prepare_enable(uhci->clk);
+		if (ret) {
+			dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
+			goto err_rmr;
+		}
+	}
+
 	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
 	if (ret)
 		goto err_rmr;
@@ -127,6 +142,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 	return 0;
 
 err_rmr:
+	if (uhci->clk)
+		clk_disable_unprepare(uhci->clk);
 	usb_put_hcd(hcd);
 
 	return ret;
@@ -135,7 +152,10 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 static int uhci_hcd_platform_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 
+	if (uhci->clk)
+		clk_disable_unprepare(uhci->clk);
 	usb_remove_hcd(hcd);
 	usb_put_hcd(hcd);
 

             reply	other threads:[~2018-01-12 22:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-12 22:39 Benjamin Herrenschmidt [this message]
  -- strict thread matches above, loose matches on Subject: below --
2018-01-13  3:35 [v3] usb: uhci: Add clk support to uhci-platform Alan Stern
2018-01-13  7:21 Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515796742.31850.116.camel@kernel.crashing.org \
    --to=benh@kernel.crashing.org \
    --cc=greg@kroah.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).