From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org, Greg KH <greg@kroah.com>,
Joel Stanley <joel.stanley@au1.ibm.com>
Subject: [v4] usb: uhci: Add clk support to uhci-platform
Date: Mon, 15 Jan 2018 09:59:39 +1100 [thread overview]
Message-ID: <1515970779.31850.125.camel@kernel.crashing.org> (raw)
The Aspeed SoCs use uhci-platform. With the new dynamic clock
control framework, the corresponding IP block clock must be
properly enabled.
This is a simplified variant of what ehci-platform does, it
looks for *one* clock attached to the device, and if it's
there, enables it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
v4. Remove unnecessary NULL checks
v3. Fix tab vs. spaces and probe error path
v2. Don't forget to git add latest changes :-) This adds the
part where we turn the clock off when removing the driver.
---
drivers/usb/host/uhci-hcd.h | 3 +++
drivers/usb/host/uhci-platform.c | 20 ++++++++++++++++++--
2 files changed, 21 insertions(+), 2 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index f1cc47292a59..7f9f33c8c232 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -4,6 +4,7 @@
#include <linux/list.h>
#include <linux/usb.h>
+#include <linux/clk.h>
#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
#define PIPE_DEVEP_MASK 0x0007ff00
@@ -447,6 +448,8 @@ struct uhci_hcd {
int total_load; /* Sum of array values */
short load[MAX_PHASE]; /* Periodic allocations */
+ struct clk *clk; /* (optional) clock source */
+
/* Reset host controller */
void (*reset_hc) (struct uhci_hcd *uhci);
int (*check_and_reset_hc) (struct uhci_hcd *uhci);
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 6cb16d4b2257..55c2d99bf7ec 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -89,6 +89,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
if (!hcd)
return -ENOMEM;
+ uhci = hcd_to_uhci(hcd);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
@@ -98,8 +100,6 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- uhci = hcd_to_uhci(hcd);
-
uhci->regs = hcd->regs;
/* Grab some things from the device-tree */
@@ -119,6 +119,19 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
"Enabled Aspeed implementation workarounds\n");
}
}
+
+ /* Get and enable clock if any specified */
+ uhci->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uhci->clk)) {
+ ret = PTR_ERR(uhci->clk);
+ goto err_rmr;
+ }
+ ret = clk_prepare_enable(uhci->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Error couldn't enable clock (%d)\n", ret);
+ goto err_rmr;
+ }
+
ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
if (ret)
goto err_rmr;
@@ -127,6 +140,7 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
return 0;
err_rmr:
+ clk_disable_unprepare(uhci->clk);
usb_put_hcd(hcd);
return ret;
@@ -135,7 +149,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
static int uhci_hcd_platform_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+ clk_disable_unprepare(uhci->clk);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
next reply other threads:[~2018-01-14 22:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-14 22:59 Benjamin Herrenschmidt [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-01-15 8:41 [v4] usb: uhci: Add clk support to uhci-platform Sergei Shtylyov
2018-01-15 21:53 Benjamin Herrenschmidt
2018-01-15 22:17 Joel Stanley
2018-01-16 8:36 Sergei Shtylyov
2018-01-16 9:48 Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515970779.31850.125.camel@kernel.crashing.org \
--to=benh@kernel.crashing.org \
--cc=greg@kroah.com \
--cc=joel.stanley@au1.ibm.com \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).