* [v5,08/17] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version
@ 2018-01-16 10:57 Manu Gautam
0 siblings, 0 replies; only message in thread
From: Manu Gautam @ 2018-01-16 10:57 UTC (permalink / raw)
To: Kishon Vijay Abraham I
Cc: linux-arm-msm, linux-usb, Manu Gautam, Rob Herring, Mark Rutland,
Vivek Gautam, Stephen Boyd,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Update generic compatible string for QUSB2 V2 PHY. This will allow
all targets using QUSB2 V2 use same string.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index aa0fcb0..42c9742 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -4,7 +4,10 @@ Qualcomm QUSB2 phy controller
QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
Required properties:
- - compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
+ - compatible: compatible list, contains
+ "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+ "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
+
- reg: offset and length of the PHY register set.
- #phy-cells: must be 0.
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-01-16 10:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-16 10:57 [v5,08/17] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version Manu Gautam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).