linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: gregkh@linuxfoundation.org
Cc: linux-usb@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
Date: Thu,  8 Mar 2018 17:17:16 +0200	[thread overview]
Message-ID: <1520522237-27229-4-git-send-email-mathias.nyman@linux.intel.com> (raw)

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environment.

If the xhci_plat_suspend() disables the clk, the system cannot enable
the clk in resume like the following behavior:

< In resume >
 - genpd_resume_noirq() runs and enable the clk (enable_count = 1)
 - cpg_mssr_resume_noirq() restores the clk register.
  -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq()
     will disable the clk and keep the enable_count.
 - Even if xhci_plat_resume() calls clk_prepare_enable(), since
   the enable_count is 1, the clk will be not enabled.

After this patch is applied, the cpg-mssr driver will save the clk
as enable, so the clk will be enabled in resume.

Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-plat.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 6f03830..6652e2d 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -360,7 +360,6 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
 {
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int ret;
 
 	/*
 	 * xhci_suspend() needs `do_wakeup` to know whether host is allowed
@@ -370,12 +369,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
 	 * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
 	 * also applies to runtime suspend.
 	 */
-	ret = xhci_suspend(xhci, device_may_wakeup(dev));
-
-	if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
-		clk_disable_unprepare(xhci->clk);
-
-	return ret;
+	return xhci_suspend(xhci, device_may_wakeup(dev));
 }
 
 static int __maybe_unused xhci_plat_resume(struct device *dev)
@@ -384,9 +378,6 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	int ret;
 
-	if (!device_may_wakeup(dev) && !IS_ERR(xhci->clk))
-		clk_prepare_enable(xhci->clk);
-
 	ret = xhci_priv_resume_quirk(hcd);
 	if (ret)
 		return ret;

             reply	other threads:[~2018-03-08 15:17 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-08 15:17 Mathias Nyman [this message]
  -- strict thread matches above, loose matches on Subject: below --
2018-03-08 17:06 [3/4] usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" Greg Kroah-Hartman
2018-03-09  1:48 Yoshihiro Shimoda
2018-03-09 17:07 Greg Kroah-Hartman
2018-03-13  6:15 Yoshihiro Shimoda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1520522237-27229-4-git-send-email-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).