[V2,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's

[V2,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's

[Alan Cooper]

Add support for Broadcom STB SoC's to the ohci platform driver.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
 drivers/usb/host/ohci-platform.c | 35 +++++++++++++++++++++++++++++------
 include/linux/usb/ohci_pdriver.h |  1 +
 2 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 65a1c3fdc88c..363d6fa676a5 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
@@ -99,12 +100,24 @@ static int ohci_platform_probe(struct platform_device *dev)
 	if (usb_disabled())
 		return -ENODEV;
 
-	/*
-	 * Use reasonable defaults so platforms don't have to provide these
-	 * with DT probing on ARM.
-	 */
-	if (!pdata)
-		pdata = &ohci_platform_defaults;
+	if (!pdata) {
+		const struct usb_ohci_pdata *match_pdata;
+
+		match_pdata = of_device_get_match_data(&dev->dev);
+		if (match_pdata) {
+			pdata = devm_kzalloc(&dev->dev, sizeof(*pdata),
+					     GFP_KERNEL);
+			if (!pdata)
+				return -ENOMEM;
+			*pdata = *match_pdata;
+		} else {
+			/*
+			 * Use reasonable defaults so platforms don't have
+			 * to provide these with DT probing on ARM.
+			 */
+			pdata = &ohci_platform_defaults;
+		}
+	}
 
 	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
 	if (err)
@@ -177,6 +190,8 @@ static int ohci_platform_probe(struct platform_device *dev)
 		ohci->flags |= OHCI_QUIRK_FRAME_NO;
 	if (pdata->num_ports)
 		ohci->num_ports = pdata->num_ports;
+	if (pdata->suspend_without_phy_exit)
+		hcd->suspend_without_phy_exit = 1;
 
 #ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
 	if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
@@ -305,10 +320,18 @@ static int ohci_platform_resume(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
+static const struct usb_ohci_pdata ohci_plat_brcm_bcm7445_ohci = {
+	.power_on =		ohci_platform_power_on,
+	.power_suspend =	ohci_platform_power_off,
+	.power_off =		ohci_platform_power_off,
+	.suspend_without_phy_exit = 1,
+};
+
 static const struct of_device_id ohci_platform_ids[] = {
 	{ .compatible = "generic-ohci", },
 	{ .compatible = "cavium,octeon-6335-ohci", },
 	{ .compatible = "ti,ohci-omap3", },
+	{ .compatible = "brcm,bcm7445-ohci", &ohci_plat_brcm_bcm7445_ohci},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ohci_platform_ids);
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
index 7eb16cf587ee..16b24ea1e3bb 100644
--- a/include/linux/usb/ohci_pdriver.h
+++ b/include/linux/usb/ohci_pdriver.h
@@ -35,6 +35,7 @@ struct usb_ohci_pdata {
 	unsigned	big_endian_desc:1;
 	unsigned	big_endian_mmio:1;
 	unsigned	no_big_frame_no:1;
+	unsigned	suspend_without_phy_exit:1;
 	unsigned int	num_ports;
 
 	/* Turn on all power and clocks */

[V2,4/6] usb: ohci-platform: Add support for Broadcom STB SoC's

[Arnd Bergmann]

On Wed, Oct 17, 2018 at 11:30 PM Al Cooper <alcooperx@gmail.com> wrote:
>
> Add support for Broadcom STB SoC's to the ohci platform driver.
>
> Signed-off-by: Al Cooper <alcooperx@gmail.com>
> ---
>  drivers/usb/host/ohci-platform.c | 35 +++++++++++++++++++++++++++++------
>  include/linux/usb/ohci_pdriver.h |  1 +
>  2 files changed, 30 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index 65a1c3fdc88c..363d6fa676a5 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
> @@ -22,6 +22,7 @@
>  #include <linux/module.h>
>  #include <linux/err.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/reset.h>
> @@ -99,12 +100,24 @@ static int ohci_platform_probe(struct platform_device *dev)
>         if (usb_disabled())
>                 return -ENODEV;
>
> -       /*
> -        * Use reasonable defaults so platforms don't have to provide these
> -        * with DT probing on ARM.
> -        */
> -       if (!pdata)
> -               pdata = &ohci_platform_defaults;
> +       if (!pdata) {
> +               const struct usb_ohci_pdata *match_pdata;
> +
> +               match_pdata = of_device_get_match_data(&dev->dev);
> +               if (match_pdata) {
> +                       pdata = devm_kzalloc(&dev->dev, sizeof(*pdata),
> +                                            GFP_KERNEL);
> +                       if (!pdata)
> +                               return -ENOMEM;
> +                       *pdata = *match_pdata;

It looks like you copy the const pdata to get a non-const version.
Have you tried
propagating the 'const' modifier so that users can rely on that here?

> +               } else {
> +                       /*
> +                        * Use reasonable defaults so platforms don't have
> +                        * to provide these with DT probing on ARM.
> +                        */
> +                       pdata = &ohci_platform_defaults;
> +               }
> +       }

That would also allow you to unify it with the else path by listing
the ohci_platform_defaults
in the id table for all other compatible strings.

       Arnd