[2/6] xhci: handle port status events for removed USB3 hcd

[Mathias Nyman <mathias.nyman@linux.intel.com>]

At xhci removal the USB3 hcd (shared_hcd) is removed before the primary
USB2 hcd. Interrupts for port status changes may still occur for USB3
ports after the shared_hcd is freed, causing  NULL pointer dereference.

Check if xhci->shared_hcd is still valid before handing USB3 port events

Cc: <stable@vger.kernel.org>
Reported-by: Peter Chen <peter.chen@nxp.com>
Tested-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-ring.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index a8d92c9..80d464e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1556,6 +1556,13 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		goto cleanup;
 	}
 
+	/* We might get interrupts after shared_hcd is removed */
+	if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
+		xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
+		bogus_port_status = true;
+		goto cleanup;
+	}
+
 	hcd = port->rhub->hcd;
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
 	hcd_portnum = port->hcd_portnum;