* [PATCH 0/4] xhci features for usb-next
@ 2019-04-26 13:23 Mathias Nyman
2019-04-26 13:23 ` [1/4] usb: xhci: add Immediate Data Transfer support Mathias Nyman
` (2 more replies)
0 siblings, 3 replies; 15+ messages in thread
From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw)
To: gregkh; +Cc: linux-usb, Mathias Nyman
Hi Greg
A few features for usb next, mostly tracing and debugging features, but
also support for Immediate Data Transfer for small (up to 8 bytes)
data transfers
-Mathias
Mathias Nyman (3):
xhci: add port and bus number to port dynamic debugging
xhci: Add tracing for input control context
usb: xhci: add endpoint context tracing when an endpoint is added
Nicolas Saenz Julienne (1):
usb: xhci: add Immediate Data Transfer support
drivers/usb/host/xhci-hub.c | 44 +++++++++++++++++++++++++----------------
drivers/usb/host/xhci-ring.c | 24 ++++++++++++++++++----
drivers/usb/host/xhci-trace.h | 30 ++++++++++++++++++++++++++++
drivers/usb/host/xhci.c | 40 +++++++++++++++++++++++++++++++++----
drivers/usb/host/xhci.h | 46 +++++++++++++++++++++++++++++++++++++++++++
5 files changed, 159 insertions(+), 25 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 15+ messages in thread* [1/4] usb: xhci: add Immediate Data Transfer support @ 2019-04-26 13:23 ` Mathias Nyman 2019-04-26 13:23 ` [PATCH 1/4] " Mathias Nyman 2019-05-09 10:32 ` Marek Szyprowski 0 siblings, 2 replies; 15+ messages in thread From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw) To: gregkh; +Cc: linux-usb, Nicolas Saenz Julienne, Mathias Nyman From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Immediate data transfers (IDT) allow the HCD to copy small chunks of data (up to 8bytes) directly into its output transfer TRBs. This avoids the somewhat expensive DMA mappings that are performed by default on most URBs submissions. In the case an URB was suitable for IDT. The data is directly copied into the "Data Buffer Pointer" region of the TRB and the IDT flag is set. Instead of triggering memory accesses the HC will use the data directly. The implementation could cover all kind of output endpoints. Yet Isochronous endpoints are bypassed as I was unable to find one that matched IDT's constraints. As we try to bypass the default DMA mappings on URB buffers we'd need to find a Isochronous device with an urb->transfer_buffer_length <= 8 bytes. The implementation takes into account that the 8 byte buffers provided by the URB will never cross a 64KB boundary. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-ring.c | 12 ++++++++++++ drivers/usb/host/xhci.c | 16 ++++++++++++++++ drivers/usb/host/xhci.h | 17 +++++++++++++++++ 3 files changed, 45 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9215a28..2825031 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3275,6 +3275,12 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= TRB_IOC; more_trbs_coming = false; td->last_trb = ring->enqueue; + + if (xhci_urb_suitable_for_idt(urb)) { + memcpy(&send_addr, urb->transfer_buffer, + trb_buff_len); + field |= TRB_IDT; + } } /* Only set interrupt on short packet for IN endpoints */ @@ -3414,6 +3420,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; + if (xhci_urb_suitable_for_idt(urb)) { + memcpy(&urb->transfer_dma, urb->transfer_buffer, + urb->transfer_buffer_length); + field |= TRB_IDT; + } + remainder = xhci_td_remainder(xhci, 0, urb->transfer_buffer_length, urb->transfer_buffer_length, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7fa58c9..255f93f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1238,6 +1238,21 @@ EXPORT_SYMBOL_GPL(xhci_resume); /*-------------------------------------------------------------------------*/ +/* + * Bypass the DMA mapping if URB is suitable for Immediate Transfer (IDT), + * we'll copy the actual data into the TRB address register. This is limited to + * transfers up to 8 bytes on output endpoints of any kind with wMaxPacketSize + * >= 8 bytes. If suitable for IDT only one Transfer TRB per TD is allowed. + */ +static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + if (xhci_urb_suitable_for_idt(urb)) + return 0; + + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); +} + /** * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and * HCDs. Find the index for an endpoint given its descriptor. Use the return @@ -5154,6 +5169,7 @@ static const struct hc_driver xhci_hc_driver = { /* * managing i/o requests and associated device resources */ + .map_urb_for_dma = xhci_map_urb_for_dma, .urb_enqueue = xhci_urb_enqueue, .urb_dequeue = xhci_urb_dequeue, .alloc_dev = xhci_alloc_dev, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 9334cde..abbd481 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1303,6 +1303,8 @@ enum xhci_setup_dev { #define TRB_IOC (1<<5) /* The buffer pointer contains immediate data */ #define TRB_IDT (1<<6) +/* TDs smaller than this might use IDT */ +#define TRB_IDT_MAX_SIZE 8 /* Block Event Interrupt */ #define TRB_BEI (1<<9) @@ -2149,6 +2151,21 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, urb->stream_id); } +/* + * TODO: As per spec Isochronous IDT transmissions are supported. We bypass + * them anyways as we where unable to find a device that matches the + * constraints. + */ +static inline bool xhci_urb_suitable_for_idt(struct urb *urb) +{ + if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && + usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + return true; + + return false; +} + static inline char *xhci_slot_state_string(u32 state) { switch (state) { ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-04-26 13:23 ` [1/4] usb: xhci: add Immediate Data Transfer support Mathias Nyman @ 2019-04-26 13:23 ` Mathias Nyman 2019-05-09 10:32 ` Marek Szyprowski 1 sibling, 0 replies; 15+ messages in thread From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw) To: gregkh; +Cc: linux-usb, Nicolas Saenz Julienne, Mathias Nyman From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Immediate data transfers (IDT) allow the HCD to copy small chunks of data (up to 8bytes) directly into its output transfer TRBs. This avoids the somewhat expensive DMA mappings that are performed by default on most URBs submissions. In the case an URB was suitable for IDT. The data is directly copied into the "Data Buffer Pointer" region of the TRB and the IDT flag is set. Instead of triggering memory accesses the HC will use the data directly. The implementation could cover all kind of output endpoints. Yet Isochronous endpoints are bypassed as I was unable to find one that matched IDT's constraints. As we try to bypass the default DMA mappings on URB buffers we'd need to find a Isochronous device with an urb->transfer_buffer_length <= 8 bytes. The implementation takes into account that the 8 byte buffers provided by the URB will never cross a 64KB boundary. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-ring.c | 12 ++++++++++++ drivers/usb/host/xhci.c | 16 ++++++++++++++++ drivers/usb/host/xhci.h | 17 +++++++++++++++++ 3 files changed, 45 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 9215a28..2825031 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3275,6 +3275,12 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= TRB_IOC; more_trbs_coming = false; td->last_trb = ring->enqueue; + + if (xhci_urb_suitable_for_idt(urb)) { + memcpy(&send_addr, urb->transfer_buffer, + trb_buff_len); + field |= TRB_IDT; + } } /* Only set interrupt on short packet for IN endpoints */ @@ -3414,6 +3420,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; + if (xhci_urb_suitable_for_idt(urb)) { + memcpy(&urb->transfer_dma, urb->transfer_buffer, + urb->transfer_buffer_length); + field |= TRB_IDT; + } + remainder = xhci_td_remainder(xhci, 0, urb->transfer_buffer_length, urb->transfer_buffer_length, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7fa58c9..255f93f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1238,6 +1238,21 @@ EXPORT_SYMBOL_GPL(xhci_resume); /*-------------------------------------------------------------------------*/ +/* + * Bypass the DMA mapping if URB is suitable for Immediate Transfer (IDT), + * we'll copy the actual data into the TRB address register. This is limited to + * transfers up to 8 bytes on output endpoints of any kind with wMaxPacketSize + * >= 8 bytes. If suitable for IDT only one Transfer TRB per TD is allowed. + */ +static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + if (xhci_urb_suitable_for_idt(urb)) + return 0; + + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); +} + /** * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and * HCDs. Find the index for an endpoint given its descriptor. Use the return @@ -5154,6 +5169,7 @@ static const struct hc_driver xhci_hc_driver = { /* * managing i/o requests and associated device resources */ + .map_urb_for_dma = xhci_map_urb_for_dma, .urb_enqueue = xhci_urb_enqueue, .urb_dequeue = xhci_urb_dequeue, .alloc_dev = xhci_alloc_dev, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 9334cde..abbd481 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1303,6 +1303,8 @@ enum xhci_setup_dev { #define TRB_IOC (1<<5) /* The buffer pointer contains immediate data */ #define TRB_IDT (1<<6) +/* TDs smaller than this might use IDT */ +#define TRB_IDT_MAX_SIZE 8 /* Block Event Interrupt */ #define TRB_BEI (1<<9) @@ -2149,6 +2151,21 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, urb->stream_id); } +/* + * TODO: As per spec Isochronous IDT transmissions are supported. We bypass + * them anyways as we where unable to find a device that matches the + * constraints. + */ +static inline bool xhci_urb_suitable_for_idt(struct urb *urb) +{ + if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && + usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + return true; + + return false; +} + static inline char *xhci_slot_state_string(u32 state) { switch (state) { -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-04-26 13:23 ` [1/4] usb: xhci: add Immediate Data Transfer support Mathias Nyman 2019-04-26 13:23 ` [PATCH 1/4] " Mathias Nyman @ 2019-05-09 10:32 ` Marek Szyprowski 2019-05-09 11:40 ` Mathias Nyman 1 sibling, 1 reply; 15+ messages in thread From: Marek Szyprowski @ 2019-05-09 10:32 UTC (permalink / raw) To: Mathias Nyman, gregkh Cc: linux-usb, Nicolas Saenz Julienne, Krzysztof Kozlowski, 'Linux Samsung SOC' Dear All, On 2019-04-26 15:23, Mathias Nyman wrote: > From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > Immediate data transfers (IDT) allow the HCD to copy small chunks of > data (up to 8bytes) directly into its output transfer TRBs. This avoids > the somewhat expensive DMA mappings that are performed by default on > most URBs submissions. > > In the case an URB was suitable for IDT. The data is directly copied > into the "Data Buffer Pointer" region of the TRB and the IDT flag is > set. Instead of triggering memory accesses the HC will use the data > directly. > > The implementation could cover all kind of output endpoints. Yet > Isochronous endpoints are bypassed as I was unable to find one that > matched IDT's constraints. As we try to bypass the default DMA mappings > on URB buffers we'd need to find a Isochronous device with an > urb->transfer_buffer_length <= 8 bytes. > > The implementation takes into account that the 8 byte buffers provided > by the URB will never cross a 64KB boundary. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> > Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> I've noticed that this patch causes regression on various Samsung Exynos 5420/5422/5800 boards, which have USB3.0 host ports provided by DWC3/XHCI hardware module. The regression can be observed with ASIX USB 2.0 ethernet dongle, which stops working after applying this patch (eth0 interface is registered, but no packets are transmitted/received). I can provide more debugging information or do some tests, just let me know what do you need. Reverting this commit makes ASIX USB ethernet dongle operational again. Here are some more information from one of my test systems: # lsusb Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 002: ID 0b95:772b ASIX Electronics Corp. AX88772B Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 2232:1056 Silicon Motion Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub # lsusb -t /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=asix, 480M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M |__ Port 1: Dev 2, If 0, Class=Video, Driver=, 480M |__ Port 1: Dev 2, If 1, Class=Video, Driver=, 480M # dmesg | grep usb [ 1.484210] reg-fixed-voltage regulator-usb300: GPIO lookup for consumer (null) [ 1.484219] reg-fixed-voltage regulator-usb300: using device tree for GPIO lookup [ 1.484241] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-usb300[0]' [ 1.484276] of_get_named_gpiod_flags: parsed 'gpio' property of node '/regulator-usb300[0]' - status (0) [ 1.484749] reg-fixed-voltage regulator-usb301: GPIO lookup for consumer (null) [ 1.484758] reg-fixed-voltage regulator-usb301: using device tree for GPIO lookup [ 1.484777] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-usb301[0]' [ 1.484807] of_get_named_gpiod_flags: parsed 'gpio' property of node '/regulator-usb301[0]' - status (0) [ 1.490275] usbcore: registered new interface driver usbfs [ 1.495521] usbcore: registered new interface driver hub [ 1.500897] usbcore: registered new device driver usb [ 2.014966] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator [ 2.024093] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator [ 2.033232] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator [ 2.347306] usbcore: registered new interface driver r8152 [ 2.352427] usbcore: registered new interface driver asix [ 2.357877] usbcore: registered new interface driver ax88179_178a [ 2.363860] usbcore: registered new interface driver cdc_ether [ 2.369730] usbcore: registered new interface driver smsc75xx [ 2.375421] usbcore: registered new interface driver smsc95xx [ 2.381198] usbcore: registered new interface driver net1080 [ 2.386760] usbcore: registered new interface driver cdc_subset [ 2.392699] usbcore: registered new interface driver zaurus [ 2.398280] usbcore: registered new interface driver cdc_ncm [ 2.404280] exynos-dwc3 soc:usb3-0: soc:usb3-0 supply vdd33 not found, using dummy regulator [ 2.412485] exynos-dwc3 soc:usb3-0: soc:usb3-0 supply vdd10 not found, using dummy regulator [ 2.427570] exynos-dwc3 soc:usb3-1: soc:usb3-1 supply vdd33 not found, using dummy regulator [ 2.434748] exynos-dwc3 soc:usb3-1: soc:usb3-1 supply vdd10 not found, using dummy regulator [ 2.459866] of_get_named_gpiod_flags: can't parse 'samsung,vbus-gpio' property of node '/soc/usb@12110000[0]' [ 2.460177] exynos-ehci 12110000.usb: EHCI Host Controller [ 2.465329] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 2.473161] exynos-ehci 12110000.usb: irq 90, io mem 0x12110000 [ 2.507027] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 2.512197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 2.519880] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.527075] usb usb1: Product: EHCI Host Controller [ 2.531875] usb usb1: Manufacturer: Linux 5.1.0-rc3-00114-g95e060e68bd9 ehci_hcd [ 2.539298] usb usb1: SerialNumber: 12110000.usb [ 2.562423] exynos-ohci 12120000.usb: USB Host Controller [ 2.567689] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 2.575502] exynos-ohci 12120000.usb: irq 90, io mem 0x12120000 [ 2.651364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01 [ 2.658219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.665376] usb usb2: Product: USB Host Controller [ 2.670180] usb usb2: Manufacturer: Linux 5.1.0-rc3-00114-g95e060e68bd9 ohci_hcd [ 2.677560] usb usb2: SerialNumber: 12120000.usb [ 2.719349] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 2.726870] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.734107] usb usb3: Product: xHCI Host Controller [ 2.738947] usb usb3: Manufacturer: Linux 5.1.0-rc3-00114-g95e060e68bd9 xhci-hcd [ 2.746297] usb usb3: SerialNumber: xhci-hcd.3.auto [ 2.778642] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.786800] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 [ 2.794836] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.802022] usb usb4: Product: xHCI Host Controller [ 2.806837] usb usb4: Manufacturer: Linux 5.1.0-rc3-00114-g95e060e68bd9 xhci-hcd [ 2.814258] usb usb4: SerialNumber: xhci-hcd.3.auto [ 2.855879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 [ 2.863456] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.870894] usb usb5: Product: xHCI Host Controller [ 2.875457] usb usb5: Manufacturer: Linux 5.1.0-rc3-00114-g95e060e68bd9 xhci-hcd [ 2.882884] usb usb5: SerialNumber: xhci-hcd.4.auto [ 2.915149] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.917137] usb 1-1: new high-speed USB device number 2 using exynos-ehci [ 2.923623] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 [ 2.938433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.945302] usb usb6: Product: xHCI Host Controller [ 2.950196] usb usb6: Manufacturer: Linux 5.1.0-rc3-00114-g95e060e68bd9 xhci-hcd [ 2.957579] usb usb6: SerialNumber: xhci-hcd.4.auto [ 2.970795] usbcore: registered new interface driver uas [ 2.975423] usbcore: registered new interface driver usb-storage [ 3.208523] usb 1-1: New USB device found, idVendor=2232, idProduct=1056, bcdDevice= 0.35 [ 3.219999] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.227034] usb 1-1: Product: WebCam SC-10HDM13631N [ 3.227041] usb 1-1: Manufacturer: Generic [ 3.235923] usb 1-1: SerialNumber: 200901010001 [ 3.257013] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 3.459744] usb 5-1: New USB device found, idVendor=0b95, idProduct=772b, bcdDevice= 0.01 [ 3.460560] usbcore: registered new interface driver usbhid [ 3.460572] usbhid: USB HID core driver [ 3.474443] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.491163] usb 5-1: Product: AX88772B [ 3.500613] usb 5-1: Manufacturer: ASIX Elec. Corp. [ 3.509275] usb 5-1: SerialNumber: 1892F2 [ 4.133358] asix 5-1:1.0 eth0: register 'asix' at usb-xhci-hcd.4.auto-1, ASIX AX88772B USB 2.0 Ethernet, 00:50:b6:18:92:f2 > --- > drivers/usb/host/xhci-ring.c | 12 ++++++++++++ > drivers/usb/host/xhci.c | 16 ++++++++++++++++ > drivers/usb/host/xhci.h | 17 +++++++++++++++++ > 3 files changed, 45 insertions(+) > > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index 9215a28..2825031 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -3275,6 +3275,12 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > field |= TRB_IOC; > more_trbs_coming = false; > td->last_trb = ring->enqueue; > + > + if (xhci_urb_suitable_for_idt(urb)) { > + memcpy(&send_addr, urb->transfer_buffer, > + trb_buff_len); > + field |= TRB_IDT; > + } > } > > /* Only set interrupt on short packet for IN endpoints */ > @@ -3414,6 +3420,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > if (urb->transfer_buffer_length > 0) { > u32 length_field, remainder; > > + if (xhci_urb_suitable_for_idt(urb)) { > + memcpy(&urb->transfer_dma, urb->transfer_buffer, > + urb->transfer_buffer_length); > + field |= TRB_IDT; > + } > + > remainder = xhci_td_remainder(xhci, 0, > urb->transfer_buffer_length, > urb->transfer_buffer_length, > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index 7fa58c9..255f93f 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -1238,6 +1238,21 @@ EXPORT_SYMBOL_GPL(xhci_resume); > > /*-------------------------------------------------------------------------*/ > > +/* > + * Bypass the DMA mapping if URB is suitable for Immediate Transfer (IDT), > + * we'll copy the actual data into the TRB address register. This is limited to > + * transfers up to 8 bytes on output endpoints of any kind with wMaxPacketSize > + * >= 8 bytes. If suitable for IDT only one Transfer TRB per TD is allowed. > + */ > +static int xhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, > + gfp_t mem_flags) > +{ > + if (xhci_urb_suitable_for_idt(urb)) > + return 0; > + > + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); > +} > + > /** > * xhci_get_endpoint_index - Used for passing endpoint bitmasks between the core and > * HCDs. Find the index for an endpoint given its descriptor. Use the return > @@ -5154,6 +5169,7 @@ static const struct hc_driver xhci_hc_driver = { > /* > * managing i/o requests and associated device resources > */ > + .map_urb_for_dma = xhci_map_urb_for_dma, > .urb_enqueue = xhci_urb_enqueue, > .urb_dequeue = xhci_urb_dequeue, > .alloc_dev = xhci_alloc_dev, > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index 9334cde..abbd481 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -1303,6 +1303,8 @@ enum xhci_setup_dev { > #define TRB_IOC (1<<5) > /* The buffer pointer contains immediate data */ > #define TRB_IDT (1<<6) > +/* TDs smaller than this might use IDT */ > +#define TRB_IDT_MAX_SIZE 8 > > /* Block Event Interrupt */ > #define TRB_BEI (1<<9) > @@ -2149,6 +2151,21 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, > urb->stream_id); > } > > +/* > + * TODO: As per spec Isochronous IDT transmissions are supported. We bypass > + * them anyways as we where unable to find a device that matches the > + * constraints. > + */ > +static inline bool xhci_urb_suitable_for_idt(struct urb *urb) > +{ > + if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && > + usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && > + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) > + return true; > + > + return false; > +} > + > static inline char *xhci_slot_state_string(u32 state) > { > switch (state) { Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-09 10:32 ` Marek Szyprowski @ 2019-05-09 11:40 ` Mathias Nyman 2019-05-09 11:51 ` Nicolas Saenz Julienne 0 siblings, 1 reply; 15+ messages in thread From: Mathias Nyman @ 2019-05-09 11:40 UTC (permalink / raw) To: Marek Szyprowski, gregkh Cc: linux-usb, Nicolas Saenz Julienne, Krzysztof Kozlowski, 'Linux Samsung SOC' On 9.5.2019 13.32, Marek Szyprowski wrote: > Dear All, > > On 2019-04-26 15:23, Mathias Nyman wrote: >> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >> >> Immediate data transfers (IDT) allow the HCD to copy small chunks of >> data (up to 8bytes) directly into its output transfer TRBs. This avoids >> the somewhat expensive DMA mappings that are performed by default on >> most URBs submissions. >> >> In the case an URB was suitable for IDT. The data is directly copied >> into the "Data Buffer Pointer" region of the TRB and the IDT flag is >> set. Instead of triggering memory accesses the HC will use the data >> directly. >> >> The implementation could cover all kind of output endpoints. Yet >> Isochronous endpoints are bypassed as I was unable to find one that >> matched IDT's constraints. As we try to bypass the default DMA mappings >> on URB buffers we'd need to find a Isochronous device with an >> urb->transfer_buffer_length <= 8 bytes. >> >> The implementation takes into account that the 8 byte buffers provided >> by the URB will never cross a 64KB boundary. >> >> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> >> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> > > I've noticed that this patch causes regression on various Samsung Exynos > 5420/5422/5800 boards, which have USB3.0 host ports provided by > DWC3/XHCI hardware module. The regression can be observed with ASIX USB > 2.0 ethernet dongle, which stops working after applying this patch (eth0 > interface is registered, but no packets are transmitted/received). I can > provide more debugging information or do some tests, just let me know > what do you need. Reverting this commit makes ASIX USB ethernet dongle > operational again. > Thanks for reporting. Would it be possible to check if your ASIX ethernet dongle works on some desktop/laptop setup with this same IDT patch? Also Exynos xhci traces could help, they would show the content of the TRBs using IDT. Maybe byte order gets messed up? Take traces with: mount -t debugfs none /sys/kernel/debug echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable <connect ASIX eth dongle, try to use it> send /sys/kernel/debug/tracing/trace content to me If we can't get this fixed I'll revert the IDT patch Thanks Mathias ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-09 11:40 ` Mathias Nyman @ 2019-05-09 11:51 ` Nicolas Saenz Julienne 2019-05-09 15:10 ` Mathias Nyman 0 siblings, 1 reply; 15+ messages in thread From: Nicolas Saenz Julienne @ 2019-05-09 11:51 UTC (permalink / raw) To: Mathias Nyman, Marek Szyprowski, gregkh Cc: linux-usb, Krzysztof Kozlowski, 'Linux Samsung SOC' [-- Attachment #1: Type: text/plain, Size: 2792 bytes --] On Thu, 2019-05-09 at 14:40 +0300, Mathias Nyman wrote: > On 9.5.2019 13.32, Marek Szyprowski wrote: > > Dear All, > > > > On 2019-04-26 15:23, Mathias Nyman wrote: > > > From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > > > > > Immediate data transfers (IDT) allow the HCD to copy small chunks of > > > data (up to 8bytes) directly into its output transfer TRBs. This avoids > > > the somewhat expensive DMA mappings that are performed by default on > > > most URBs submissions. > > > > > > In the case an URB was suitable for IDT. The data is directly copied > > > into the "Data Buffer Pointer" region of the TRB and the IDT flag is > > > set. Instead of triggering memory accesses the HC will use the data > > > directly. > > > > > > The implementation could cover all kind of output endpoints. Yet > > > Isochronous endpoints are bypassed as I was unable to find one that > > > matched IDT's constraints. As we try to bypass the default DMA mappings > > > on URB buffers we'd need to find a Isochronous device with an > > > urb->transfer_buffer_length <= 8 bytes. > > > > > > The implementation takes into account that the 8 byte buffers provided > > > by the URB will never cross a 64KB boundary. > > > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > > Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> > > > Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> > > > > I've noticed that this patch causes regression on various Samsung Exynos > > 5420/5422/5800 boards, which have USB3.0 host ports provided by > > DWC3/XHCI hardware module. The regression can be observed with ASIX USB > > 2.0 ethernet dongle, which stops working after applying this patch (eth0 > > interface is registered, but no packets are transmitted/received). I can > > provide more debugging information or do some tests, just let me know > > what do you need. Reverting this commit makes ASIX USB ethernet dongle > > operational again. > > > > Thanks for reporting. > > Would it be possible to check if your ASIX ethernet dongle works on some > desktop/laptop setup with this same IDT patch? > > Also Exynos xhci traces could help, they would show the content of the TRBs > using IDT. > Maybe byte order gets messed up? > > Take traces with: > > mount -t debugfs none /sys/kernel/debug > echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb > echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable > > <connect ASIX eth dongle, try to use it> > > send /sys/kernel/debug/tracing/trace content to me > > If we can't get this fixed I'll revert the IDT patch Hi Matthias, thanks for your help. I'll also be looking into it, so please send me the logs too. Regards, Nicolas [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-09 11:51 ` Nicolas Saenz Julienne @ 2019-05-09 15:10 ` Mathias Nyman 2019-05-09 15:38 ` Nicolas Saenz Julienne 2019-05-10 6:28 ` Marek Szyprowski 0 siblings, 2 replies; 15+ messages in thread From: Mathias Nyman @ 2019-05-09 15:10 UTC (permalink / raw) To: Nicolas Saenz Julienne, Marek Szyprowski, gregkh Cc: linux-usb, Krzysztof Kozlowski, 'Linux Samsung SOC' [-- Attachment #1: Type: text/plain, Size: 8493 bytes --] On 9.5.2019 14.51, Nicolas Saenz Julienne wrote: > On Thu, 2019-05-09 at 14:40 +0300, Mathias Nyman wrote: >> On 9.5.2019 13.32, Marek Szyprowski wrote: >>> Dear All, >>> >>> On 2019-04-26 15:23, Mathias Nyman wrote: >>>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>> >>>> Immediate data transfers (IDT) allow the HCD to copy small chunks of >>>> data (up to 8bytes) directly into its output transfer TRBs. This avoids >>>> the somewhat expensive DMA mappings that are performed by default on >>>> most URBs submissions. >>>> >>>> In the case an URB was suitable for IDT. The data is directly copied >>>> into the "Data Buffer Pointer" region of the TRB and the IDT flag is >>>> set. Instead of triggering memory accesses the HC will use the data >>>> directly. >>>> >>>> The implementation could cover all kind of output endpoints. Yet >>>> Isochronous endpoints are bypassed as I was unable to find one that >>>> matched IDT's constraints. As we try to bypass the default DMA mappings >>>> on URB buffers we'd need to find a Isochronous device with an >>>> urb->transfer_buffer_length <= 8 bytes. >>>> >>>> The implementation takes into account that the 8 byte buffers provided >>>> by the URB will never cross a 64KB boundary. >>>> >>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> >>>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> >>> >>> I've noticed that this patch causes regression on various Samsung Exynos >>> 5420/5422/5800 boards, which have USB3.0 host ports provided by >>> DWC3/XHCI hardware module. The regression can be observed with ASIX USB >>> 2.0 ethernet dongle, which stops working after applying this patch (eth0 >>> interface is registered, but no packets are transmitted/received). I can >>> provide more debugging information or do some tests, just let me know >>> what do you need. Reverting this commit makes ASIX USB ethernet dongle >>> operational again. >>> >> >> Thanks for reporting. >> >> Would it be possible to check if your ASIX ethernet dongle works on some >> desktop/laptop setup with this same IDT patch? >> >> Also Exynos xhci traces could help, they would show the content of the TRBs >> using IDT. >> Maybe byte order gets messed up? >> >> Take traces with: >> >> mount -t debugfs none /sys/kernel/debug >> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb >> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable >> >> <connect ASIX eth dongle, try to use it> >> >> send /sys/kernel/debug/tracing/trace content to me >> >> If we can't get this fixed I'll revert the IDT patch > > Hi Matthias, thanks for your help. > > I'll also be looking into it, so please send me the logs too. > Got the logs off list, thanks The "Buffer" data in Control transfer Data stage look suspicious. grep "flags I:" trace_fail | grep Data kworker/0:2-124 [000] d..1 63.092399: xhci_queue_trb: CTRL: Buffer 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' flags I:i:c:s:i:e:C ifconfig-1429 [005] d..1 93.181231: xhci_queue_trb: CTRL: Buffer 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' flags I:i:c:s:i:e:C ifconfig-1429 [007] dn.2 93.182050: xhci_queue_trb: CTRL: Buffer 0000000000000000 length 8 TD size 0 intr 0 type 'Data Stage' flags I:i:c:s:i:e:C ifconfig-1429 [007] d..2 93.182499: xhci_queue_trb: CTRL: Buffer 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags I:i:c:s:i:e:C ifconfig-1429 [007] d..2 93.182736: xhci_queue_trb: CTRL: Buffer 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags I:i:c:s:i:e:C kworker/0:3-1409 [000] d..3 93.382630: xhci_queue_trb: CTRL: Buffer 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags I:i:c:s:i:e:C First guess would be that in case URB has URB_NO_TRANSFER_DMA_MAP set then data will be mapped and urb->transfer_dma is already set. The IDT patch uses urb->trabfer_dma as a temporary buffer, and copies the urb->transfer_buffer there. if transfer buffer is already dma mapped the urb->transfer_buffer can be garbage, (shouldn't, but it can be) Below code avoids IDT if URB_NO_TRANSFER_DMA_MAP is set, and doesn't touch urb->transfer_dma (patch attached) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fed3385..f080054 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3423,11 +3423,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; + u64 addr; if (xhci_urb_suitable_for_idt(urb)) { - memcpy(&urb->transfer_dma, urb->transfer_buffer, + memcpy(&addr, urb->transfer_buffer, urb->transfer_buffer_length); field |= TRB_IDT; + } else { + addr = (u64) urb->transfer_dma; } remainder = xhci_td_remainder(xhci, 0, @@ -3440,8 +3443,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; queue_trb(xhci, ep_ring, true, - lower_32_bits(urb->transfer_dma), - upper_32_bits(urb->transfer_dma), + lower_32_bits(addr), + upper_32_bits(addr), length_field, field | ep_ring->cycle_state); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a450a99..7f8b950 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2160,7 +2160,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb) { if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) return true; return false; If that doesn't help, then it's possible DATA trbs in control transfer can't use IDT at all. IDT is supported for Normal TRBs, which have a different trb type than DATA trbs in control transfers. Also xhci specs 4.11.7 limit IDT usage: "If the IDT flag is set in one TRB of a TD, then it shall be the only Transfer TRB of the TD" A whole control transfer is one TD, and it already contains a SETUP transfer TRB which is using the IDT flag. Following disables IDT for control transfers (testpatch attached as well) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fed3385..4c1c9ad 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3424,12 +3424,6 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; - if (xhci_urb_suitable_for_idt(urb)) { - memcpy(&urb->transfer_dma, urb->transfer_buffer, - urb->transfer_buffer_length); - field |= TRB_IDT; - } - remainder = xhci_td_remainder(xhci, 0, urb->transfer_buffer_length, urb->transfer_buffer_length, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a450a99..2e16ff7 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2158,9 +2158,11 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, */ static inline bool xhci_urb_suitable_for_idt(struct urb *urb) { - if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && + if (!usb_endpoint_xfer_control(&urb->ep->desc) && + !usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) return true; return false; -Mathias [-- Attachment #2: 0001-xhci-Don-t-use-IDT-tranfers-when-not-supported.patch --] [-- Type: text/x-patch, Size: 2095 bytes --] From c92d0e83f24d9a8f401ef5c91ebc8263fd9d2a56 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman@linux.intel.com> Date: Thu, 9 May 2019 17:47:28 +0300 Subject: [TESTPATCH2] xhci: Don't use IDT tranfers when not supported control tranfer data stage can't support IDT as xHCI can't have two IDT flags in the same TD. The SETUP stage is already using IDT see xhci 4.11.7 for details Also don't use IDT if tranfer buffer is already dma mapped. There is no benefit with IDT then. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-ring.c | 6 ------ drivers/usb/host/xhci.h | 6 ++++-- 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fed3385..4c1c9ad 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3424,12 +3424,6 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; - if (xhci_urb_suitable_for_idt(urb)) { - memcpy(&urb->transfer_dma, urb->transfer_buffer, - urb->transfer_buffer_length); - field |= TRB_IDT; - } - remainder = xhci_td_remainder(xhci, 0, urb->transfer_buffer_length, urb->transfer_buffer_length, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a450a99..2e16ff7 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2158,9 +2158,11 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, */ static inline bool xhci_urb_suitable_for_idt(struct urb *urb) { - if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && + if (!usb_endpoint_xfer_control(&urb->ep->desc) && + !usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) return true; return false; -- 2.7.4 [-- Attachment #3: 0001-xhci-don-t-use-IDT-transfer-buffer-is-already-dma-ma.patch --] [-- Type: text/x-patch, Size: 2157 bytes --] From 485c5ede4d2e237c7f28f0cbb891151f88718e5b Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman@linux.intel.com> Date: Thu, 9 May 2019 17:47:28 +0300 Subject: [TESTPATCH1] xhci: don't use IDT transfer buffer is already dma mapped Limit IDT usage if transfer buffer is already mapped. Also don't use urb->transfer_dma as a temporary buffer Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-ring.c | 9 ++++++--- drivers/usb/host/xhci.h | 3 ++- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fed3385..f080054 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3423,11 +3423,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (urb->transfer_buffer_length > 0) { u32 length_field, remainder; + u64 addr; if (xhci_urb_suitable_for_idt(urb)) { - memcpy(&urb->transfer_dma, urb->transfer_buffer, + memcpy(&addr, urb->transfer_buffer, urb->transfer_buffer_length); field |= TRB_IDT; + } else { + addr = (u64) urb->transfer_dma; } remainder = xhci_td_remainder(xhci, 0, @@ -3440,8 +3443,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, if (setup->bRequestType & USB_DIR_IN) field |= TRB_DIR_IN; queue_trb(xhci, ep_ring, true, - lower_32_bits(urb->transfer_dma), - upper_32_bits(urb->transfer_dma), + lower_32_bits(addr), + upper_32_bits(addr), length_field, field | ep_ring->cycle_state); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a450a99..7f8b950 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2160,7 +2160,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb) { if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) && usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) return true; return false; -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-09 15:10 ` Mathias Nyman @ 2019-05-09 15:38 ` Nicolas Saenz Julienne 2019-05-10 6:11 ` Mathias Nyman 2019-05-10 6:28 ` Marek Szyprowski 1 sibling, 1 reply; 15+ messages in thread From: Nicolas Saenz Julienne @ 2019-05-09 15:38 UTC (permalink / raw) To: Mathias Nyman, Marek Szyprowski, gregkh Cc: linux-usb, Krzysztof Kozlowski, 'Linux Samsung SOC' [-- Attachment #1: Type: text/plain, Size: 5026 bytes --] Hi Matthias, thanks for spending the time debugging this :) On Thu, 2019-05-09 at 18:10 +0300, Mathias Nyman wrote: > Got the logs off list, thanks > > The "Buffer" data in Control transfer Data stage look suspicious. > > grep "flags I:" trace_fail | grep Data > kworker/0:2-124 [000] d..1 63.092399: xhci_queue_trb: CTRL: Buffer > 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [005] d..1 93.181231: xhci_queue_trb: CTRL: Buffer > 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [007] dn.2 93.182050: xhci_queue_trb: CTRL: Buffer > 0000000000000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [007] d..2 93.182499: xhci_queue_trb: CTRL: Buffer > 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [007] d..2 93.182736: xhci_queue_trb: CTRL: Buffer > 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > kworker/0:3-1409 [000] d..3 93.382630: xhci_queue_trb: CTRL: Buffer > 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > > First guess would be that in case URB has URB_NO_TRANSFER_DMA_MAP set then > data > will be mapped and urb->transfer_dma is already set. > The IDT patch uses urb->trabfer_dma as a temporary buffer, and copies the > urb->transfer_buffer there. > if transfer buffer is already dma mapped the urb->transfer_buffer can be > garbage, > (shouldn't, but it can be) > > Below code avoids IDT if URB_NO_TRANSFER_DMA_MAP is set, and doesn't touch > urb->transfer_dma (patch attached) > > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index fed3385..f080054 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -3423,11 +3423,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t > mem_flags, > > if (urb->transfer_buffer_length > 0) { > u32 length_field, remainder; > + u64 addr; > > if (xhci_urb_suitable_for_idt(urb)) { > - memcpy(&urb->transfer_dma, urb->transfer_buffer, > + memcpy(&addr, urb->transfer_buffer, > urb->transfer_buffer_length); > field |= TRB_IDT; > + } else { > + addr = (u64) urb->transfer_dma; > } > > remainder = xhci_td_remainder(xhci, 0, > @@ -3440,8 +3443,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t > mem_flags, > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_DIR_IN; > queue_trb(xhci, ep_ring, true, > - lower_32_bits(urb->transfer_dma), > - upper_32_bits(urb->transfer_dma), > + lower_32_bits(addr), > + upper_32_bits(addr), > length_field, > field | ep_ring->cycle_state); > } > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index a450a99..7f8b950 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -2160,7 +2160,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb > *urb) > { > if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) > && > usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && > - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) > + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && > + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) > return true; > > return false; > This could be it, I broadly checked and assumed everyone was playing nice with the transfer_dma pointer, but I guess I might have missed something. > If that doesn't help, then it's possible DATA trbs in control transfer can't > use IDT at all. IDT is supported for Normal TRBs, which have a different trb > type than DATA trbs in control transfers. > > Also xhci specs 4.11.7 limit IDT usage: > > "If the IDT flag is set in one TRB of a TD, then it shall be the only Transfer > TRB of the TD" > > A whole control transfer is one TD, and it already contains a SETUP transfer > TRB > which is using the IDT flag. > > Following disables IDT for control transfers (testpatch attached as well) This one I'm not so sure as the standard defines a control transfer as a 2 or 3 TD operation (see 4.11.2.2): "The Control Transfer Ring may contain Setup Stage and Status Stage TDs, and optionally Data Stage TDs." Also, for what is worth, I spent some time testing that specific case on my intel laptop while preparing the patch. Regards, Nicolas [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-09 15:38 ` Nicolas Saenz Julienne @ 2019-05-10 6:11 ` Mathias Nyman 0 siblings, 0 replies; 15+ messages in thread From: Mathias Nyman @ 2019-05-10 6:11 UTC (permalink / raw) To: Nicolas Saenz Julienne, Marek Szyprowski, gregkh Cc: linux-usb, Krzysztof Kozlowski, 'Linux Samsung SOC' On 9.5.2019 18.38, Nicolas Saenz Julienne wrote: > Hi Mathias, thanks for spending the time debugging this :) > > On Thu, 2019-05-09 at 18:10 +0300, Mathias Nyman wrote: >> Got the logs off list, thanks >> >> The "Buffer" data in Control transfer Data stage look suspicious. >> >> First guess would be that in case URB has URB_NO_TRANSFER_DMA_MAP set then >> data >> will be mapped and urb->transfer_dma is already set. >> The IDT patch uses urb->trabfer_dma as a temporary buffer, and copies the >> urb->transfer_buffer there. >> if transfer buffer is already dma mapped the urb->transfer_buffer can be >> garbage, >> (shouldn't, but it can be) > > This could be it, I broadly checked and assumed everyone was playing nice with > the transfer_dma pointer, but I guess I might have missed something. > >> If that doesn't help, then it's possible DATA trbs in control transfer can't >> use IDT at all. IDT is supported for Normal TRBs, which have a different trb >> type than DATA trbs in control transfers. >> >> Also xhci specs 4.11.7 limit IDT usage: >> >> "If the IDT flag is set in one TRB of a TD, then it shall be the only Transfer >> TRB of the TD" >> >> A whole control transfer is one TD, and it already contains a SETUP transfer >> TRB >> which is using the IDT flag. > > This one I'm not so sure as the standard defines a control transfer as a 2 or 3 > TD operation (see 4.11.2.2): > > "The Control Transfer Ring may contain Setup Stage and Status Stage TDs, and > optionally Data Stage TDs." True, xhci driver treats a control transfer as one TD, but TRBs aren't chained so from hw point of view they are separate TDs > > Also, for what is worth, I spent some time testing that specific case on my > intel laptop while preparing the patch. And a closer look at the spec shows that both Normal and Data Stage TRB support IDT. So this is not likely the cause. -Mathias ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-09 15:10 ` Mathias Nyman 2019-05-09 15:38 ` Nicolas Saenz Julienne @ 2019-05-10 6:28 ` Marek Szyprowski 2019-05-10 7:30 ` Mathias Nyman 1 sibling, 1 reply; 15+ messages in thread From: Marek Szyprowski @ 2019-05-10 6:28 UTC (permalink / raw) To: Mathias Nyman, Nicolas Saenz Julienne, gregkh Cc: linux-usb, Krzysztof Kozlowski, 'Linux Samsung SOC' Hi Mathias, On 2019-05-09 17:10, Mathias Nyman wrote: > On 9.5.2019 14.51, Nicolas Saenz Julienne wrote: >> On Thu, 2019-05-09 at 14:40 +0300, Mathias Nyman wrote: >>> On 9.5.2019 13.32, Marek Szyprowski wrote: >>>> Dear All, >>>> >>>> On 2019-04-26 15:23, Mathias Nyman wrote: >>>>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>>> >>>>> Immediate data transfers (IDT) allow the HCD to copy small chunks of >>>>> data (up to 8bytes) directly into its output transfer TRBs. This >>>>> avoids >>>>> the somewhat expensive DMA mappings that are performed by default on >>>>> most URBs submissions. >>>>> >>>>> In the case an URB was suitable for IDT. The data is directly copied >>>>> into the "Data Buffer Pointer" region of the TRB and the IDT flag is >>>>> set. Instead of triggering memory accesses the HC will use the data >>>>> directly. >>>>> >>>>> The implementation could cover all kind of output endpoints. Yet >>>>> Isochronous endpoints are bypassed as I was unable to find one that >>>>> matched IDT's constraints. As we try to bypass the default DMA >>>>> mappings >>>>> on URB buffers we'd need to find a Isochronous device with an >>>>> urb->transfer_buffer_length <= 8 bytes. >>>>> >>>>> The implementation takes into account that the 8 byte buffers >>>>> provided >>>>> by the URB will never cross a 64KB boundary. >>>>> >>>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>>> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> >>>>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> >>>> >>>> I've noticed that this patch causes regression on various Samsung >>>> Exynos >>>> 5420/5422/5800 boards, which have USB3.0 host ports provided by >>>> DWC3/XHCI hardware module. The regression can be observed with ASIX >>>> USB >>>> 2.0 ethernet dongle, which stops working after applying this patch >>>> (eth0 >>>> interface is registered, but no packets are transmitted/received). >>>> I can >>>> provide more debugging information or do some tests, just let me know >>>> what do you need. Reverting this commit makes ASIX USB ethernet dongle >>>> operational again. >>>> >>> >>> Thanks for reporting. >>> >>> Would it be possible to check if your ASIX ethernet dongle works on >>> some >>> desktop/laptop setup with this same IDT patch? >>> >>> Also Exynos xhci traces could help, they would show the content of >>> the TRBs >>> using IDT. >>> Maybe byte order gets messed up? >>> >>> Take traces with: >>> >>> mount -t debugfs none /sys/kernel/debug >>> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb >>> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable >>> >>> <connect ASIX eth dongle, try to use it> >>> >>> send /sys/kernel/debug/tracing/trace content to me >>> >>> If we can't get this fixed I'll revert the IDT patch >> >> Hi Matthias, thanks for your help. >> >> I'll also be looking into it, so please send me the logs too. >> > > Got the logs off list, thanks > > The "Buffer" data in Control transfer Data stage look suspicious. > > grep "flags I:" trace_fail | grep Data > kworker/0:2-124 [000] d..1 63.092399: xhci_queue_trb: CTRL: > Buffer 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' > flags I:i:c:s:i:e:C > ifconfig-1429 [005] d..1 93.181231: xhci_queue_trb: CTRL: Buffer > 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [007] dn.2 93.182050: xhci_queue_trb: CTRL: Buffer > 0000000000000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [007] d..2 93.182499: xhci_queue_trb: CTRL: Buffer > 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > ifconfig-1429 [007] d..2 93.182736: xhci_queue_trb: CTRL: Buffer > 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags > I:i:c:s:i:e:C > kworker/0:3-1409 [000] d..3 93.382630: xhci_queue_trb: CTRL: > Buffer 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' > flags I:i:c:s:i:e:C > > First guess would be that in case URB has URB_NO_TRANSFER_DMA_MAP set > then data > will be mapped and urb->transfer_dma is already set. > The IDT patch uses urb->trabfer_dma as a temporary buffer, and copies the > urb->transfer_buffer there. > if transfer buffer is already dma mapped the urb->transfer_buffer can > be garbage, > (shouldn't, but it can be) > > Below code avoids IDT if URB_NO_TRANSFER_DMA_MAP is set, and doesn't > touch > urb->transfer_dma (patch attached) > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index fed3385..f080054 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -3423,11 +3423,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, > gfp_t mem_flags, > > if (urb->transfer_buffer_length > 0) { > u32 length_field, remainder; > + u64 addr; > > if (xhci_urb_suitable_for_idt(urb)) { > - memcpy(&urb->transfer_dma, urb->transfer_buffer, > + memcpy(&addr, urb->transfer_buffer, > urb->transfer_buffer_length); > field |= TRB_IDT; > + } else { > + addr = (u64) urb->transfer_dma; > } > > remainder = xhci_td_remainder(xhci, 0, > @@ -3440,8 +3443,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, > gfp_t mem_flags, > if (setup->bRequestType & USB_DIR_IN) > field |= TRB_DIR_IN; > queue_trb(xhci, ep_ring, true, > - lower_32_bits(urb->transfer_dma), > - upper_32_bits(urb->transfer_dma), > + lower_32_bits(addr), > + upper_32_bits(addr), > length_field, > field | ep_ring->cycle_state); > } > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index a450a99..7f8b950 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -2160,7 +2160,8 @@ static inline bool > xhci_urb_suitable_for_idt(struct urb *urb) > { > if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && > usb_urb_dir_out(urb) && > usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && > - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) > + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && > + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) > return true; > > return false; > > If that doesn't help, then it's possible DATA trbs in control transfer can't > use IDT at all. IDT is supported for Normal TRBs, which have a > different trb > type than DATA trbs in control transfers. > > Also xhci specs 4.11.7 limit IDT usage: > > "If the IDT flag is set in one TRB of a TD, then it shall be the only > Transfer > TRB of the TD" > > A whole control transfer is one TD, and it already contains a SETUP > transfer TRB > which is using the IDT flag. > > Following disables IDT for control transfers (testpatch attached as well) > > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > index fed3385..4c1c9ad 100644 > --- a/drivers/usb/host/xhci-ring.c > +++ b/drivers/usb/host/xhci-ring.c > @@ -3424,12 +3424,6 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, > gfp_t mem_flags, > if (urb->transfer_buffer_length > 0) { > u32 length_field, remainder; > > - if (xhci_urb_suitable_for_idt(urb)) { > - memcpy(&urb->transfer_dma, urb->transfer_buffer, > - urb->transfer_buffer_length); > - field |= TRB_IDT; > - } > - > remainder = xhci_td_remainder(xhci, 0, > urb->transfer_buffer_length, > urb->transfer_buffer_length, > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > index a450a99..2e16ff7 100644 > --- a/drivers/usb/host/xhci.h > +++ b/drivers/usb/host/xhci.h > @@ -2158,9 +2158,11 @@ static inline struct xhci_ring > *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, > */ > static inline bool xhci_urb_suitable_for_idt(struct urb *urb) > { > - if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && > usb_urb_dir_out(urb) && > + if (!usb_endpoint_xfer_control(&urb->ep->desc) && > + !usb_endpoint_xfer_isoc(&urb->ep->desc) && > usb_urb_dir_out(urb) && > usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && > - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) > + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && > + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) > return true; > > return false; > > -Mathias Thanks for the patches to test! Both patches applied separately (without the other one) fixes the issue with ASIX USB dongle, but from the discussion I assume that the first one (0001-xhci-don-t-use-IDT-transfer-buffer-is-already-dma-ma.patch) really fixes the issue, while the second one is just a workaround. You can add: Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Best regards -- Marek Szyprowski, PhD Samsung R&D Institute Poland ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/4] usb: xhci: add Immediate Data Transfer support 2019-05-10 6:28 ` Marek Szyprowski @ 2019-05-10 7:30 ` Mathias Nyman 0 siblings, 0 replies; 15+ messages in thread From: Mathias Nyman @ 2019-05-10 7:30 UTC (permalink / raw) To: Marek Szyprowski, Nicolas Saenz Julienne, gregkh Cc: linux-usb, Krzysztof Kozlowski, 'Linux Samsung SOC' On 10.5.2019 9.28, Marek Szyprowski wrote: > Hi Mathias, > > On 2019-05-09 17:10, Mathias Nyman wrote: >> On 9.5.2019 14.51, Nicolas Saenz Julienne wrote: >>> On Thu, 2019-05-09 at 14:40 +0300, Mathias Nyman wrote: >>>> On 9.5.2019 13.32, Marek Szyprowski wrote: >>>>> Dear All, >>>>> >>>>> On 2019-04-26 15:23, Mathias Nyman wrote: >>>>>> From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>>>> >>>>>> Immediate data transfers (IDT) allow the HCD to copy small chunks of >>>>>> data (up to 8bytes) directly into its output transfer TRBs. This >>>>>> avoids >>>>>> the somewhat expensive DMA mappings that are performed by default on >>>>>> most URBs submissions. >>>>>> >>>>>> In the case an URB was suitable for IDT. The data is directly copied >>>>>> into the "Data Buffer Pointer" region of the TRB and the IDT flag is >>>>>> set. Instead of triggering memory accesses the HC will use the data >>>>>> directly. >>>>>> >>>>>> The implementation could cover all kind of output endpoints. Yet >>>>>> Isochronous endpoints are bypassed as I was unable to find one that >>>>>> matched IDT's constraints. As we try to bypass the default DMA >>>>>> mappings >>>>>> on URB buffers we'd need to find a Isochronous device with an >>>>>> urb->transfer_buffer_length <= 8 bytes. >>>>>> >>>>>> The implementation takes into account that the 8 byte buffers >>>>>> provided >>>>>> by the URB will never cross a 64KB boundary. >>>>>> >>>>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>>>> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> >>>>>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> >>>>> >>>>> I've noticed that this patch causes regression on various Samsung >>>>> Exynos >>>>> 5420/5422/5800 boards, which have USB3.0 host ports provided by >>>>> DWC3/XHCI hardware module. The regression can be observed with ASIX >>>>> USB >>>>> 2.0 ethernet dongle, which stops working after applying this patch >>>>> (eth0 >>>>> interface is registered, but no packets are transmitted/received). >>>>> I can >>>>> provide more debugging information or do some tests, just let me know >>>>> what do you need. Reverting this commit makes ASIX USB ethernet dongle >>>>> operational again. >>>>> >>>> >>>> Thanks for reporting. >>>> >>>> Would it be possible to check if your ASIX ethernet dongle works on >>>> some >>>> desktop/laptop setup with this same IDT patch? >>>> >>>> Also Exynos xhci traces could help, they would show the content of >>>> the TRBs >>>> using IDT. >>>> Maybe byte order gets messed up? >>>> >>>> Take traces with: >>>> >>>> mount -t debugfs none /sys/kernel/debug >>>> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb >>>> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable >>>> >>>> <connect ASIX eth dongle, try to use it> >>>> >>>> send /sys/kernel/debug/tracing/trace content to me >>>> >>>> If we can't get this fixed I'll revert the IDT patch >>> >>> Hi Matthias, thanks for your help. >>> >>> I'll also be looking into it, so please send me the logs too. >>> >> >> Got the logs off list, thanks >> >> The "Buffer" data in Control transfer Data stage look suspicious. >> >> grep "flags I:" trace_fail | grep Data >> kworker/0:2-124 [000] d..1 63.092399: xhci_queue_trb: CTRL: >> Buffer 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' >> flags I:i:c:s:i:e:C >> ifconfig-1429 [005] d..1 93.181231: xhci_queue_trb: CTRL: Buffer >> 0000000018b65000 length 6 TD size 0 intr 0 type 'Data Stage' flags >> I:i:c:s:i:e:C >> ifconfig-1429 [007] dn.2 93.182050: xhci_queue_trb: CTRL: Buffer >> 0000000000000000 length 8 TD size 0 intr 0 type 'Data Stage' flags >> I:i:c:s:i:e:C >> ifconfig-1429 [007] d..2 93.182499: xhci_queue_trb: CTRL: Buffer >> 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags >> I:i:c:s:i:e:C >> ifconfig-1429 [007] d..2 93.182736: xhci_queue_trb: CTRL: Buffer >> 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' flags >> I:i:c:s:i:e:C >> kworker/0:3-1409 [000] d..3 93.382630: xhci_queue_trb: CTRL: >> Buffer 0000000080000000 length 8 TD size 0 intr 0 type 'Data Stage' >> flags I:i:c:s:i:e:C >> >> First guess would be that in case URB has URB_NO_TRANSFER_DMA_MAP set >> then data >> will be mapped and urb->transfer_dma is already set. >> The IDT patch uses urb->trabfer_dma as a temporary buffer, and copies the >> urb->transfer_buffer there. >> if transfer buffer is already dma mapped the urb->transfer_buffer can >> be garbage, >> (shouldn't, but it can be) >> >> Below code avoids IDT if URB_NO_TRANSFER_DMA_MAP is set, and doesn't >> touch >> urb->transfer_dma (patch attached) >> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c >> index fed3385..f080054 100644 >> --- a/drivers/usb/host/xhci-ring.c >> +++ b/drivers/usb/host/xhci-ring.c >> @@ -3423,11 +3423,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, >> gfp_t mem_flags, >> >> if (urb->transfer_buffer_length > 0) { >> u32 length_field, remainder; >> + u64 addr; >> >> if (xhci_urb_suitable_for_idt(urb)) { >> - memcpy(&urb->transfer_dma, urb->transfer_buffer, >> + memcpy(&addr, urb->transfer_buffer, >> urb->transfer_buffer_length); >> field |= TRB_IDT; >> + } else { >> + addr = (u64) urb->transfer_dma; >> } >> >> remainder = xhci_td_remainder(xhci, 0, >> @@ -3440,8 +3443,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, >> gfp_t mem_flags, >> if (setup->bRequestType & USB_DIR_IN) >> field |= TRB_DIR_IN; >> queue_trb(xhci, ep_ring, true, >> - lower_32_bits(urb->transfer_dma), >> - upper_32_bits(urb->transfer_dma), >> + lower_32_bits(addr), >> + upper_32_bits(addr), >> length_field, >> field | ep_ring->cycle_state); >> } >> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h >> index a450a99..7f8b950 100644 >> --- a/drivers/usb/host/xhci.h >> +++ b/drivers/usb/host/xhci.h >> @@ -2160,7 +2160,8 @@ static inline bool >> xhci_urb_suitable_for_idt(struct urb *urb) >> { >> if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && >> usb_urb_dir_out(urb) && >> usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && >> - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) >> + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && >> + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) >> return true; >> >> return false; >> > > If that doesn't help, then it's possible DATA trbs in control > transfer can't >> use IDT at all. IDT is supported for Normal TRBs, which have a >> different trb >> type than DATA trbs in control transfers. >> >> Also xhci specs 4.11.7 limit IDT usage: >> >> "If the IDT flag is set in one TRB of a TD, then it shall be the only >> Transfer >> TRB of the TD" >> >> A whole control transfer is one TD, and it already contains a SETUP >> transfer TRB >> which is using the IDT flag. >> >> Following disables IDT for control transfers (testpatch attached as well) >> >> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c >> index fed3385..4c1c9ad 100644 >> --- a/drivers/usb/host/xhci-ring.c >> +++ b/drivers/usb/host/xhci-ring.c >> @@ -3424,12 +3424,6 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, >> gfp_t mem_flags, >> if (urb->transfer_buffer_length > 0) { >> u32 length_field, remainder; >> >> - if (xhci_urb_suitable_for_idt(urb)) { >> - memcpy(&urb->transfer_dma, urb->transfer_buffer, >> - urb->transfer_buffer_length); >> - field |= TRB_IDT; >> - } >> - >> remainder = xhci_td_remainder(xhci, 0, >> urb->transfer_buffer_length, >> urb->transfer_buffer_length, >> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h >> index a450a99..2e16ff7 100644 >> --- a/drivers/usb/host/xhci.h >> +++ b/drivers/usb/host/xhci.h >> @@ -2158,9 +2158,11 @@ static inline struct xhci_ring >> *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, >> */ >> static inline bool xhci_urb_suitable_for_idt(struct urb *urb) >> { >> - if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && >> usb_urb_dir_out(urb) && >> + if (!usb_endpoint_xfer_control(&urb->ep->desc) && >> + !usb_endpoint_xfer_isoc(&urb->ep->desc) && >> usb_urb_dir_out(urb) && >> usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE && >> - urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE) >> + urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE && >> + !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) >> return true; >> >> return false; >> >> -Mathias > > > Thanks for the patches to test! Both patches applied separately (without > the other one) fixes the issue with ASIX USB dongle, but from the > discussion I assume that the first one > (0001-xhci-don-t-use-IDT-transfer-buffer-is-already-dma-ma.patch) really > fixes the issue, while the second one is just a workaround. > > You can add: > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > > Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> > Great, thanks, I'll send the first patch forward after the merge window Mathias ^ permalink raw reply [flat|nested] 15+ messages in thread
* [3/4] xhci: Add tracing for input control context @ 2019-04-26 13:23 ` Mathias Nyman 2019-04-26 13:23 ` [PATCH 3/4] " Mathias Nyman 0 siblings, 1 reply; 15+ messages in thread From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw) To: gregkh; +Cc: linux-usb, Mathias Nyman Add tracing for the add and drop bits in the input control context used in Address device, configure endpoint, evaluate context commands. The add and drop bits tell xHC which enpoints are added and dropped. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-trace.h | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.c | 3 +++ drivers/usb/host/xhci.h | 29 +++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 88b4274..9b0e641 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -432,6 +432,31 @@ DEFINE_EVENT(xhci_log_slot_ctx, xhci_configure_endpoint, TP_ARGS(ctx) ); +DECLARE_EVENT_CLASS(xhci_log_ctrl_ctx, + TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx), + TP_ARGS(ctrl_ctx), + TP_STRUCT__entry( + __field(u32, drop) + __field(u32, add) + ), + TP_fast_assign( + __entry->drop = le32_to_cpu(ctrl_ctx->drop_flags); + __entry->add = le32_to_cpu(ctrl_ctx->add_flags); + ), + TP_printk("%s", xhci_decode_ctrl_ctx(__entry->drop, __entry->add) + ) +); + +DEFINE_EVENT(xhci_log_ctrl_ctx, xhci_address_ctrl_ctx, + TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx), + TP_ARGS(ctrl_ctx) +); + +DEFINE_EVENT(xhci_log_ctrl_ctx, xhci_configure_endpoint_ctrl_ctx, + TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx), + TP_ARGS(ctrl_ctx) +); + DECLARE_EVENT_CLASS(xhci_log_ring, TP_PROTO(struct xhci_ring *ring), TP_ARGS(ring), diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index cdccbdf..2ab76a5 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2771,6 +2771,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx); + + trace_xhci_configure_endpoint_ctrl_ctx(ctrl_ctx); trace_xhci_configure_endpoint(slot_ctx); if (!ctx_change) @@ -4036,6 +4038,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, trace_xhci_address_ctx(xhci, virt_dev->in_ctx, le32_to_cpu(slot_ctx->dev_info) >> 27); + trace_xhci_address_ctrl_ctx(ctrl_ctx); spin_lock_irqsave(&xhci->lock, flags); trace_xhci_setup_device(virt_dev); ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index abbd481..a450a99 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2401,6 +2401,35 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, return str; } +static inline const char *xhci_decode_ctrl_ctx(unsigned long drop, + unsigned long add) +{ + static char str[1024]; + unsigned int bit; + int ret = 0; + + if (drop) { + ret = sprintf(str, "Drop:"); + for_each_set_bit(bit, &drop, 32) + ret += sprintf(str + ret, " %d%s", + bit / 2, + bit % 2 ? "in":"out"); + ret += sprintf(str + ret, ", "); + } + + if (add) { + ret += sprintf(str + ret, "Add:%s%s", + (add & SLOT_FLAG) ? " slot":"", + (add & EP0_FLAG) ? " ep0":""); + add &= ~(SLOT_FLAG | EP0_FLAG); + for_each_set_bit(bit, &add, 32) + ret += sprintf(str + ret, " %d%s", + bit / 2, + bit % 2 ? "in":"out"); + } + return str; +} + static inline const char *xhci_decode_slot_context(u32 info, u32 info2, u32 tt_info, u32 state) { ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/4] xhci: Add tracing for input control context 2019-04-26 13:23 ` [3/4] xhci: Add tracing for input control context Mathias Nyman @ 2019-04-26 13:23 ` Mathias Nyman 0 siblings, 0 replies; 15+ messages in thread From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw) To: gregkh; +Cc: linux-usb, Mathias Nyman Add tracing for the add and drop bits in the input control context used in Address device, configure endpoint, evaluate context commands. The add and drop bits tell xHC which enpoints are added and dropped. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-trace.h | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.c | 3 +++ drivers/usb/host/xhci.h | 29 +++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 88b4274..9b0e641 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -432,6 +432,31 @@ DEFINE_EVENT(xhci_log_slot_ctx, xhci_configure_endpoint, TP_ARGS(ctx) ); +DECLARE_EVENT_CLASS(xhci_log_ctrl_ctx, + TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx), + TP_ARGS(ctrl_ctx), + TP_STRUCT__entry( + __field(u32, drop) + __field(u32, add) + ), + TP_fast_assign( + __entry->drop = le32_to_cpu(ctrl_ctx->drop_flags); + __entry->add = le32_to_cpu(ctrl_ctx->add_flags); + ), + TP_printk("%s", xhci_decode_ctrl_ctx(__entry->drop, __entry->add) + ) +); + +DEFINE_EVENT(xhci_log_ctrl_ctx, xhci_address_ctrl_ctx, + TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx), + TP_ARGS(ctrl_ctx) +); + +DEFINE_EVENT(xhci_log_ctrl_ctx, xhci_configure_endpoint_ctrl_ctx, + TP_PROTO(struct xhci_input_control_ctx *ctrl_ctx), + TP_ARGS(ctrl_ctx) +); + DECLARE_EVENT_CLASS(xhci_log_ring, TP_PROTO(struct xhci_ring *ring), TP_ARGS(ring), diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index cdccbdf..2ab76a5 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2771,6 +2771,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx); + + trace_xhci_configure_endpoint_ctrl_ctx(ctrl_ctx); trace_xhci_configure_endpoint(slot_ctx); if (!ctx_change) @@ -4036,6 +4038,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, trace_xhci_address_ctx(xhci, virt_dev->in_ctx, le32_to_cpu(slot_ctx->dev_info) >> 27); + trace_xhci_address_ctrl_ctx(ctrl_ctx); spin_lock_irqsave(&xhci->lock, flags); trace_xhci_setup_device(virt_dev); ret = xhci_queue_address_device(xhci, command, virt_dev->in_ctx->dma, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index abbd481..a450a99 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -2401,6 +2401,35 @@ static inline const char *xhci_decode_trb(u32 field0, u32 field1, u32 field2, return str; } +static inline const char *xhci_decode_ctrl_ctx(unsigned long drop, + unsigned long add) +{ + static char str[1024]; + unsigned int bit; + int ret = 0; + + if (drop) { + ret = sprintf(str, "Drop:"); + for_each_set_bit(bit, &drop, 32) + ret += sprintf(str + ret, " %d%s", + bit / 2, + bit % 2 ? "in":"out"); + ret += sprintf(str + ret, ", "); + } + + if (add) { + ret += sprintf(str + ret, "Add:%s%s", + (add & SLOT_FLAG) ? " slot":"", + (add & EP0_FLAG) ? " ep0":""); + add &= ~(SLOT_FLAG | EP0_FLAG); + for_each_set_bit(bit, &add, 32) + ret += sprintf(str + ret, " %d%s", + bit / 2, + bit % 2 ? "in":"out"); + } + return str; +} + static inline const char *xhci_decode_slot_context(u32 info, u32 info2, u32 tt_info, u32 state) { -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [4/4] usb: xhci: add endpoint context tracing when an endpoint is added @ 2019-04-26 13:23 ` Mathias Nyman 2019-04-26 13:23 ` [PATCH 4/4] " Mathias Nyman 0 siblings, 1 reply; 15+ messages in thread From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw) To: gregkh; +Cc: linux-usb, Mathias Nyman The configure endpoint command configures all the endpoints that were flagged to be added or dropped. To know the content of each of the added endpoints we need to add tracing to the .add_endpoint() callback, just after initializing all the context values. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-trace.h | 5 +++++ drivers/usb/host/xhci.c | 4 ++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 9b0e641..052a269 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -366,6 +366,11 @@ DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_config_ep, TP_ARGS(ctx) ); +DEFINE_EVENT(xhci_log_ep_ctx, xhci_add_endpoint, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx) +); + DECLARE_EVENT_CLASS(xhci_log_slot_ctx, TP_PROTO(struct xhci_slot_ctx *ctx), TP_ARGS(ctx), diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2ab76a5..a9bb796 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1807,6 +1807,7 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_container_ctx *in_ctx; unsigned int ep_index; struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; u32 added_ctxs; u32 new_add_flags, new_drop_flags; struct xhci_virt_device *virt_dev; @@ -1897,6 +1898,9 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, /* Store the usb_device pointer for later use */ ep->hcpriv = udev; + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + trace_xhci_add_endpoint(ep_ctx); + xhci_debugfs_create_endpoint(xhci, virt_dev, ep_index); xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", ^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/4] usb: xhci: add endpoint context tracing when an endpoint is added 2019-04-26 13:23 ` [4/4] usb: xhci: add endpoint context tracing when an endpoint is added Mathias Nyman @ 2019-04-26 13:23 ` Mathias Nyman 0 siblings, 0 replies; 15+ messages in thread From: Mathias Nyman @ 2019-04-26 13:23 UTC (permalink / raw) To: gregkh; +Cc: linux-usb, Mathias Nyman The configure endpoint command configures all the endpoints that were flagged to be added or dropped. To know the content of each of the added endpoints we need to add tracing to the .add_endpoint() callback, just after initializing all the context values. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> --- drivers/usb/host/xhci-trace.h | 5 +++++ drivers/usb/host/xhci.c | 4 ++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 9b0e641..052a269 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -366,6 +366,11 @@ DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_cmd_config_ep, TP_ARGS(ctx) ); +DEFINE_EVENT(xhci_log_ep_ctx, xhci_add_endpoint, + TP_PROTO(struct xhci_ep_ctx *ctx), + TP_ARGS(ctx) +); + DECLARE_EVENT_CLASS(xhci_log_slot_ctx, TP_PROTO(struct xhci_slot_ctx *ctx), TP_ARGS(ctx), diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2ab76a5..a9bb796 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1807,6 +1807,7 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_container_ctx *in_ctx; unsigned int ep_index; struct xhci_input_control_ctx *ctrl_ctx; + struct xhci_ep_ctx *ep_ctx; u32 added_ctxs; u32 new_add_flags, new_drop_flags; struct xhci_virt_device *virt_dev; @@ -1897,6 +1898,9 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, /* Store the usb_device pointer for later use */ ep->hcpriv = udev; + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + trace_xhci_add_endpoint(ep_ctx); + xhci_debugfs_create_endpoint(xhci, virt_dev, ep_index); xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", -- 2.7.4 ^ permalink raw reply related [flat|nested] 15+ messages in thread
end of thread, other threads:[~2019-05-10 7:27 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-04-26 13:23 [PATCH 0/4] xhci features for usb-next Mathias Nyman 2019-04-26 13:23 ` [1/4] usb: xhci: add Immediate Data Transfer support Mathias Nyman 2019-04-26 13:23 ` [PATCH 1/4] " Mathias Nyman 2019-05-09 10:32 ` Marek Szyprowski 2019-05-09 11:40 ` Mathias Nyman 2019-05-09 11:51 ` Nicolas Saenz Julienne 2019-05-09 15:10 ` Mathias Nyman 2019-05-09 15:38 ` Nicolas Saenz Julienne 2019-05-10 6:11 ` Mathias Nyman 2019-05-10 6:28 ` Marek Szyprowski 2019-05-10 7:30 ` Mathias Nyman 2019-04-26 13:23 ` [3/4] xhci: Add tracing for input control context Mathias Nyman 2019-04-26 13:23 ` [PATCH 3/4] " Mathias Nyman 2019-04-26 13:23 ` [4/4] usb: xhci: add endpoint context tracing when an endpoint is added Mathias Nyman 2019-04-26 13:23 ` [PATCH 4/4] " Mathias Nyman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).