linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: fei.yang@intel.com
To: felipe.balbi@linux.intel.com, john.stultz@linaro.org,
	andrzej.p@collabora.com, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org,
	stable@vger.kernel.org
Subject: [PATCH v3] usb: dwc3: gadget: trb_dequeue is not updated properly
Date: Thu, 18 Jul 2019 17:46:23 -0700	[thread overview]
Message-ID: <1563497183-7114-1-git-send-email-fei.yang@intel.com> (raw)

From: Fei Yang <fei.yang@intel.com>

If scatter-gather operation is allowed, a large USB request is split into
multiple TRBs. These TRBs are chained up by setting DWC3_TRB_CTRL_CHN bit
except the last one which has DWC3_TRB_CTRL_IOC bit set instead.
Since only the last TRB has IOC set for the whole USB request, the
dwc3_gadget_ep_reclaim_trb_sg() gets called only once after the last TRB
completes and all the TRBs allocated for this request are supposed to be
reclaimed. However that is not what the current code does.

dwc3_gadget_ep_reclaim_trb_sg() is trying to reclaim all the TRBs in the
following for-loop,
	for_each_sg(sg, s, pending, i) {
		trb = &dep->trb_pool[dep->trb_dequeue];

                if (trb->ctrl & DWC3_TRB_CTRL_HWO)
                        break;

                req->sg = sg_next(s);
                req->num_pending_sgs--;

                ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req,
                                trb, event, status, chain);
                if (ret)
                        break;
        }
but since the interrupt comes only after the last TRB completes, the
event->status has DEPEVT_STATUS_IOC bit set, so that the for-loop ends for
the first TRB due to dwc3_gadget_ep_reclaim_completed_trb() returns 1.
	if (event->status & DEPEVT_STATUS_IOC)
		return 1;

This patch addresses the issue by checking each TRB in function
dwc3_gadget_ep_reclaim_trb_sg() and maing sure the chained ones are properly
reclaimed. dwc3_gadget_ep_reclaim_completed_trb() will return 1 Only for the
last TRB.

Signed-off-by: Fei Yang <fei.yang@intel.com>
Cc: stable <stable@vger.kernel.org>
---
v2: Better solution is to reclaim chained TRBs in dwc3_gadget_ep_reclaim_trb_sg()
    and leave the last TRB to the dwc3_gadget_ep_reclaim_completed_trb().
v3: Checking DWC3_TRB_CTRL_CHN bit for each TRB instead, and making sure that
    dwc3_gadget_ep_reclaim_completed_trb() returns 1 only for the last TRB.
---
 drivers/usb/dwc3/gadget.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 173f532..88eed49 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2394,7 +2394,7 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	if (event->status & DEPEVT_STATUS_SHORT && !chain)
 		return 1;
 
-	if (event->status & DEPEVT_STATUS_IOC)
+	if (event->status & DEPEVT_STATUS_IOC && !chain)
 		return 1;
 
 	return 0;
@@ -2404,11 +2404,12 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
 		struct dwc3_request *req, const struct dwc3_event_depevt *event,
 		int status)
 {
-	struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue];
+	struct dwc3_trb *trb;
 	struct scatterlist *sg = req->sg;
 	struct scatterlist *s;
 	unsigned int pending = req->num_pending_sgs;
 	unsigned int i;
+	int chain = false;
 	int ret = 0;
 
 	for_each_sg(sg, s, pending, i) {
@@ -2419,9 +2420,13 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
 
 		req->sg = sg_next(s);
 		req->num_pending_sgs--;
+		if (trb->ctrl & DWC3_TRB_CTRL_CHN)
+			chain = true;
+		else
+			chain = false;
 
 		ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req,
-				trb, event, status, true);
+				trb, event, status, chain);
 		if (ret)
 			break;
 	}
-- 
2.7.4


             reply	other threads:[~2019-07-19  0:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-19  0:46 fei.yang [this message]
2019-07-19  1:12 ` [PATCH v3] usb: dwc3: gadget: trb_dequeue is not updated properly Thinh Nguyen
2019-07-23 18:51   ` John Stultz
2019-08-08 12:43     ` Felipe Balbi
2019-07-23 20:27   ` [PATCH] usb: dwc3: Check for IOC/LST bit in both event->status and TRB->ctrl fields John Stultz
2019-07-29 18:34     ` John Stultz
2019-07-19  7:32 ` [PATCH v3] usb: dwc3: gadget: trb_dequeue is not updated properly Felipe Balbi
2019-07-23 18:53   ` Yang, Fei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563497183-7114-1-git-send-email-fei.yang@intel.com \
    --to=fei.yang@intel.com \
    --cc=andrzej.p@collabora.com \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).