Good day.

I have a USB audio interface RODE AI-1 connected to usb hub.
The device works after booting into the system, however dmesg reports 
tons of issues.
Some of them are

usb 1-6.1.3: device descriptor read/64, error -71
usb 1-6.1-port3: Cannot enable. Maybe the USB cable is bad?
usb 1-6.1.3: hub failed to enable device, error -22

Full dmesg output is attached to the email in the rode-ai-1.txt
The output of lsusb -vt is attached to lsusb-all.txt

Some more information.

The system is Fedora 30 Workstation Edition x64
Kernel is 5.1.20-300.fc30.x86_64

the output of lsusb -vd 19f7:000a (USB device vendor/product id) for 
RODE AI-1 is attached to usb-device-info.txt
the output of lsmod can be found in the attached lsmod.txt

Connecting RODE AI-1 directly to a PC USB gives even more miserable 
results unfortunately.