From: jun.li@nxp.com
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com
Cc: gregkh@linuxfoundation.org, jun.li@nxp.com, linux-imx@nxp.com,
linux-usb@vger.kernel.org
Subject: [PATCH v3] usb: typec: tcpm: set correct data role for non-DRD
Date: Fri, 14 Feb 2020 15:53:48 +0800 [thread overview]
Message-ID: <1581666828-2063-1-git-send-email-jun.li@nxp.com> (raw)
From: Li Jun <jun.li@nxp.com>
Since the typec port data role is separated from power role,
so check the port data capability when setting data role.
Signed-off-by: Li Jun <jun.li@nxp.com>
---
change for v3:
- Use 2 macro to get correct typec data role for source and sink
according to port data capability.
change for v2:
- Pass the right typec data role when call tcpm_set_roles()
- Return error if the pass typec data role is not supported
in tcpm_set_roles().
drivers/usb/typec/tcpm/tcpm.c | 53 ++++++++++++++++++++++++++++++++++---------
1 file changed, 42 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index f3087ef..78077c2 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -373,6 +373,14 @@ struct pd_rx_event {
((port)->try_src_count == 0 && (port)->try_role == TYPEC_SOURCE && \
(port)->port_type == TYPEC_PORT_DRP)
+#define tcpm_data_role_for_source(port) \
+ ((port)->typec_caps.data == TYPEC_PORT_UFP ? \
+ TYPEC_DEVICE : TYPEC_HOST)
+
+#define tcpm_data_role_for_sink(port) \
+ ((port)->typec_caps.data == TYPEC_PORT_DFP ? \
+ TYPEC_HOST : TYPEC_DEVICE)
+
static enum tcpm_state tcpm_default_state(struct tcpm_port *port)
{
if (port->port_type == TYPEC_PORT_DRP) {
@@ -788,10 +796,30 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
else
orientation = TYPEC_ORIENTATION_REVERSE;
- if (data == TYPEC_HOST)
- usb_role = USB_ROLE_HOST;
- else
- usb_role = USB_ROLE_DEVICE;
+ if (port->typec_caps.data == TYPEC_PORT_DRD) {
+ if (data == TYPEC_HOST)
+ usb_role = USB_ROLE_HOST;
+ else
+ usb_role = USB_ROLE_DEVICE;
+ } else if (port->typec_caps.data == TYPEC_PORT_DFP) {
+ if (data == TYPEC_HOST) {
+ if (role == TYPEC_SOURCE)
+ usb_role = USB_ROLE_HOST;
+ else
+ usb_role = USB_ROLE_NONE;
+ } else {
+ return -ENOTSUPP;
+ }
+ } else {
+ if (data == TYPEC_DEVICE) {
+ if (role == TYPEC_SINK)
+ usb_role = USB_ROLE_DEVICE;
+ else
+ usb_role = USB_ROLE_NONE;
+ } else {
+ return -ENOTSUPP;
+ }
+ }
ret = tcpm_mux_set(port, TYPEC_STATE_USB, usb_role, orientation);
if (ret < 0)
@@ -1817,7 +1845,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
tcpm_set_state(port, SOFT_RESET, 0);
break;
case PD_CTRL_DR_SWAP:
- if (port->port_type != TYPEC_PORT_DRP) {
+ if (port->typec_caps.data != TYPEC_PORT_DRD) {
tcpm_queue_message(port, PD_MSG_CTRL_REJECT);
break;
}
@@ -2618,7 +2646,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
if (ret < 0)
return ret;
- ret = tcpm_set_roles(port, true, TYPEC_SOURCE, TYPEC_HOST);
+ ret = tcpm_set_roles(port, true, TYPEC_SOURCE,
+ tcpm_data_role_for_source(port));
if (ret < 0)
return ret;
@@ -2740,7 +2769,8 @@ static int tcpm_snk_attach(struct tcpm_port *port)
if (ret < 0)
return ret;
- ret = tcpm_set_roles(port, true, TYPEC_SINK, TYPEC_DEVICE);
+ ret = tcpm_set_roles(port, true, TYPEC_SINK,
+ tcpm_data_role_for_sink(port));
if (ret < 0)
return ret;
@@ -2766,7 +2796,8 @@ static int tcpm_acc_attach(struct tcpm_port *port)
if (port->attached)
return 0;
- ret = tcpm_set_roles(port, true, TYPEC_SOURCE, TYPEC_HOST);
+ ret = tcpm_set_roles(port, true, TYPEC_SOURCE,
+ tcpm_data_role_for_source(port));
if (ret < 0)
return ret;
@@ -3293,7 +3324,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_vconn(port, true);
tcpm_set_vbus(port, false);
tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE,
- TYPEC_HOST);
+ tcpm_data_role_for_source(port));
tcpm_set_state(port, SRC_HARD_RESET_VBUS_ON, PD_T_SRC_RECOVER);
break;
case SRC_HARD_RESET_VBUS_ON:
@@ -3308,7 +3339,7 @@ static void run_state_machine(struct tcpm_port *port)
if (port->pd_capable)
tcpm_set_charge(port, false);
tcpm_set_roles(port, port->self_powered, TYPEC_SINK,
- TYPEC_DEVICE);
+ tcpm_data_role_for_sink(port));
/*
* VBUS may or may not toggle, depending on the adapter.
* If it doesn't toggle, transition to SNK_HARD_RESET_SINK_ON
@@ -3969,7 +4000,7 @@ static int tcpm_dr_set(struct typec_port *p, enum typec_data_role data)
mutex_lock(&port->swap_lock);
mutex_lock(&port->lock);
- if (port->port_type != TYPEC_PORT_DRP) {
+ if (port->typec_caps.data != TYPEC_PORT_DRD) {
ret = -EINVAL;
goto port_unlock;
}
--
2.7.4
reply other threads:[~2020-02-14 7:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581666828-2063-1-git-send-email-jun.li@nxp.com \
--to=jun.li@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).